KEDIERS C700

Download PDF
Contents

KEDIERS C700 E-ATX Tower PC Case Instruction Manual

Model: C700

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KEDIERS C700 E-ATX Tower PC Case. Please read this manual thoroughly before beginning assembly or operation to ensure proper functionality and safety.

KEDIERS C700 PC Case with purple ARGB fans

Image 1.1: Front view of the KEDIERS C700 PC Case, showcasing its tempered glass panels and pre-installed ARGB fans illuminated in purple.

2. Product Features

  • Pre-Installed ARGB Fans: Equipped with 10 pre-installed 120mm ARGB fans for enhanced cooling and customizable lighting.
  • Tempered Glass Panels: Features three 4mm thick tempered glass panels, providing a clear view of internal components and RGB lighting.
  • I/O Panel: Includes 2 x USB 3.0 ports, 1 x Type-C port, 1 x HD Audio jack, Reset Button, and Power Button for convenient access.
  • Extensive Cable Management: Designed with reasonable back routing holes and a removable storage cable box to facilitate clean cable organization.
  • Remarkable Expansion: Supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards.
  • Storage Bays: Provides space for 3 x 3.5'' HDDs and 6 x 2.5'' SSDs.

3. Setup and Installation

3.1. Preparing the Case

Before installing components, ensure the case is placed on a stable, flat surface. The tempered glass side panel can be opened for easy access to the interior.

KEDIERS C700 PC Case with open side panel and internal components

Image 3.1: The KEDIERS C700 PC Case with its hinged tempered glass side panel open, revealing the spacious interior ready for component installation.

3.2. Motherboard Installation

The C700 case supports various motherboard form factors: E-ATX, ATX, Micro-ATX, and Mini-ITX. Install your motherboard onto the pre-installed standoffs. Ensure all screws are tightened securely.

Diagram showing motherboard, CPU cooler, and GPU size compatibility within the KEDIERS C700 case

Image 3.2: A diagram illustrating the compatible dimensions for CPU coolers (up to 190mm), various motherboard sizes (ITX, M-ATX, ATX, E-ATX), and GPUs (up to 470mm) within the C700 chassis.

3.3. Storage Device Installation

The case provides dedicated bays for both 3.5'' HDDs and 2.5'' SSDs. Utilize the removable storage cable box for organized installation.

Internal view of KEDIERS C700 PC Case showing HDD and SSD mounting locations

Image 3.3: An internal diagram of the KEDIERS C700 PC Case highlighting the locations for installing 3.5-inch HDDs and 2.5-inch SSDs.

3.4. Cooling System Setup

The C700 comes with 10 pre-installed 120mm ARGB fans. Additional fans and radiators can be installed to further enhance cooling performance.

  • Fan Capacity: Supports up to 12 x 120mm fans or a combination of 6 x 120mm and 6 x 240mm fans.
  • Radiator Capacity: Maximum capacity for 3 x 360mm radiators, or 2 x 280mm radiators + 1 x 360mm radiator.
Diagram illustrating fan and radiator placement options in the KEDIERS C700 PC Case

Image 3.4: A visual guide detailing the various fan and radiator mounting positions and supported sizes (120mm, 140mm, 240mm, 280mm, 360mm) within the KEDIERS C700 PC Case.

4. Operation

4.1. Front I/O Panel Functions

The top I/O panel provides convenient access to essential ports and controls:

  • Power Button: To power on/off the system.
  • Reset Button: To restart the system.
  • USB 3.0 Ports (x2): For high-speed data transfer.
  • Type-C Port (x1): For modern USB-C connectivity.
  • HD Audio Jack (x1): For headphone and microphone connections.
Close-up of the KEDIERS C700 PC Case top I/O panel

Image 4.1: A detailed view of the KEDIERS C700 PC Case's top-mounted I/O panel, showing the power button, reset button, USB 3.0 ports, and Type-C port.

4.2. ARGB Lighting Control

The pre-installed ARGB fans are controlled via an included ARGB controller. This controller can also be synchronized with your motherboard's ARGB software.

  • Remote Control: Use the provided multifunctional RGB remote control to adjust lighting modes, colors, fan speed, and brightness. The remote offers over 100 lighting modes.
  • Motherboard Synchronization: To achieve ARGB light synchronization with your motherboard, connect the 5V-3PIN cable from the control board to your motherboard's 5V-3PIN ARGB header.
Diagram of the KEDIERS C700 fan hub and remote control functions

Image 4.2: An illustration detailing the functions of the ARGB fan remote control and the fan hub, including buttons for light switch, brightness, fan speed, single color, switch mode, and favorite modes.

Diagram showing ARGB fan connections and motherboard sync cable

Image 4.3: A diagram illustrating the connection of the 120mm RGB fans to the RGB controller and the necessary 5V-3PIN motherboard synchronization cable for ARGB lighting control.

5. Maintenance

To maintain the aesthetic and functional integrity of your KEDIERS C700 PC Case, regular cleaning is recommended.

  • Tempered Glass Panels: Clean the tempered glass panels with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that may damage the surface.
  • Interior Dust Removal: Periodically use compressed air to remove dust accumulation from fans and internal components to ensure optimal airflow and cooling performance.

6. Troubleshooting

  • ARGB Lights Not Synchronizing: Ensure the 5V-3PIN cable from the ARGB controller is correctly connected to a compatible 5V-3PIN ARGB header on your motherboard. Check your motherboard's manual for the correct header location.
  • Fans Not Spinning: Verify that all fan power cables are securely connected to the ARGB controller or directly to the motherboard fan headers.
  • No Power: Check all power connections from the power supply unit (PSU) to the motherboard, GPU, and other components. Ensure the front panel power switch cable is correctly connected to the motherboard.

7. Specifications

FeatureSpecification
BrandKEDIERS
Model NameC700
Case TypeFull Tower
Motherboard SupportE-ATX, ATX, Micro-ATX, Mini-ITX
MaterialTempered Glass
Pre-installed Fans10 x 120mm ARGB Fans
I/O Ports2 x USB 3.0, 1 x Type-C, 1 x HD Audio, Power, Reset
Drive Bays3 x 3.5'' HDD, 6 x 2.5'' SSD
Item Weight27 pounds
Product Dimensions (LxWxH)20.07 x 10 x 20.55 inches
Cooling MethodAir

© 2023 KEDIERS. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.