Enhulk T403 Handheld Rechargeable Pool Cleaner User Manual

Product Overview

The Enhulk T403 Handheld Rechargeable Pool Cleaner is engineered for quick and efficient removal of debris such as acorns, twigs, leaves, dirt, and sand from various pool types. Its cordless design and powerful suction make pool maintenance simple and hassle-free.

Important Safety Information

• Swimmers should never be in the pool when the vacuum is in use.
• Always ensure the pool's pump and suction are turned off before cleaning or maintaining the vacuum.
• Keep long hair and children away from drain covers to prevent entrapment.

Product Components

The Enhulk T403 Handheld Rechargeable Pool Cleaner with its telescopic pole, ready for use.

An exploded view showing all the individual components of the pool cleaner.

• Main Unit: Contains the motor, battery, on/off switch, and charging interface.
• Telescopic Pole: Extends from 35.8 to 87.5 inches for extended reach.
• Portable Handle: A shorter handle for handheld cleaning in smaller areas.
• Vacuum Head: The primary cleaning attachment with wheels and brushes for floor cleaning.
• Triangular Suction Head: Ideal for cleaning stairs, corners, and hard-to-reach areas.
• Nose Cone Head: Another specialized head for versatile cleaning.
• Filter Bags (4 pcs): Includes two fine-mesh (500M) bags for sand/silt and two coarse-mesh (180M/300M) bags for larger debris.
• Main Pump Casing: Houses the filter bag and connects to the vacuum head.
• Check Valve: A plunger mechanism within the vacuum head that prevents debris from escaping when the unit is turned off.
• Charging Cable: For recharging the internal lithium battery.

Setup and Assembly

The Enhulk T403 is designed for tool-free assembly, making it quick and convenient to set up.

Visual guide for assembling the pool cleaner.

The two different cleaning heads for versatile use.

1. Install the Filter: Choose the appropriate filter bag (fine-mesh for sand/silt, coarse-mesh for larger debris) and secure it within the locking handle. Ensure the rubber housing of the filter is properly seated.
2. Connect the Body Part: Attach the main pump casing to the filter assembly, ensuring a secure fit.
3. Insert the Vacuum Head: Connect your preferred vacuum head (triangular or nose cone) to the main pump casing.
4. Attach the Handle: Depending on your pool depth, attach either the short portable handle or the telescopic pole to the main unit. The telescopic pole can extend from 35.8 to 87.5 inches. Standard pool poles can also be used for even longer reach.
5. Charge the Battery: Before first use, fully charge the unit. The 5 x 2000mAh rechargeable lithium battery provides up to 60 minutes of run time and fully recharges in just 1.5 hours. Ensure the charging port is completely dry before plugging in the charger.

Operating Instructions

Official product video demonstrating the Enhulk T403 Pool Cleaner in action.

Visual representation of the powerful suction picking up sand, twigs, leaves, and bugs.

1. Submerge the Unit: Fully submerge the pool vacuum into the water before turning it on. Ensure the water level is above the outlet fins to prevent motor damage.
2. Activate: Simply slide the on/off switch to the 'on' position. The unit will begin to operate once submerged.
3. Vacuuming: Move the vacuum head slowly and steadily across the pool floor and walls. The wheels on the vacuum head allow for smooth gliding. The stiff bristles help scrub away stubborn dirt.
4. Debris Collection: The powerful suction (up to 18.5 gallons/min) will draw debris into the filter bag. The check valve prevents collected debris from flowing back into the pool when the unit is lifted or turned off.
5. Battery Indicator: Monitor the battery indicator on the main unit to know when recharging is needed.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Enhulk pool cleaner.

The pool cleaner charging, highlighting its quick recharge time.

1. Clean Filter Bag: After each use, or when suction power decreases, remove the filter bag from the unit. Empty collected debris and rinse the bag thoroughly with a hose until clean. Allow it to dry completely before reinserting.
2. Clean Main Unit and Heads: Rinse the main pump casing, vacuum head, and other attachments with fresh water to remove any residue.
3. Store Properly: Store the unit in a dry, shaded area away from direct sunlight and extreme temperatures. Ensure the charging port is dry before storage.

Troubleshooting

• Reduced suction or unit stops working: This often indicates a full filter bag. Check and clean the filter bag thoroughly.
• Charging issues: Ensure the charging port is completely dry before connecting the charger. Water in the port can cause corrosion and prevent charging.
• Dirty water returning to pool: Verify that the check valve (plunger) is functioning correctly and is not obstructed. Also, ensure the filter bag is properly seated and not damaged.

Specifications

Warranty and Support

The Enhulk T403 Pool Cleaner comes with a limited warranty. For detailed warranty information, troubleshooting, or customer support, please refer to the official user manual.

You can download the full user manual in PDF format here: User Manual (PDF)