DOINOW Cordless Electric Screwdriver-B1
Contents
DOINOW Mini Electric Screwdriver Instruction Manual
Model: Cordless Electric Screwdriver-B1
Introduction
The DOINOW Mini Electric Screwdriver is a versatile and precise tool designed for intricate repair tasks on various electronic devices. Its compact size, powerful motor, and comprehensive set of magnetic bits make it ideal for working with laptops, mobile phones, watches, cameras, and other precision instruments. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
What's Included
- 1x Mini Electric Screwdriver
- 48x Precision S2 Steel Bits
- 1x USB-C Charging Cable
- 1x Magnetic Storage Case
- 1x User Manual

Setup
Charging the Screwdriver
Before first use, fully charge the screwdriver. Connect the provided USB-C charging cable to the screwdriver's Type-C port and plug the other end into a compatible USB power source (e.g., computer, wall adapter). The indicator lights will show the charging status. A full charge typically allows for 2-3 hours of continuous operation, tightening approximately 500 screws.

Installing and Changing Bits
The screwdriver features a magnetic chuck for easy bit installation. Select the appropriate S2 steel bit for your task. Insert the bit firmly into the screwdriver's chuck until it is securely held by the magnet. To remove, simply pull the bit out. The magnetic storage case keeps all 48 bits organized and prevents loss. You can also use the magnetized area on the bottom of the case to magnetize bits or secure small screws.

Operating Instructions
Power On/Off and Direction Control
The screwdriver operates with a simple two-button control system. Press the upper button (indicated by an upward arrow) to rotate the bit counter-clockwise, which is typically used for screwing out. Press the lower button (indicated by a downward arrow) to rotate the bit clockwise, used for screwing in. Release the button to stop the rotation.

LED Illumination
The screwdriver is equipped with an LED light that automatically illuminates the work area when the screwdriver is in operation. This feature enhances visibility in dimly lit spaces, ensuring precise work.
Torque and Manual Override
The screwdriver provides an electric torque of 0.2 Nm, suitable for delicate electronic components. For screws that are too tight or require additional force, the screwdriver also supports a manual torque of up to 3 Nm. This allows you to manually turn the screwdriver to loosen or tighten stubborn screws without damaging the motor.

Maintenance
- Cleaning: Wipe the screwdriver and bits with a soft, dry cloth after each use to remove dust and debris. Do not use liquid cleaners or solvents.
- Storage: Store the screwdriver and all bits in the provided magnetic case when not in use. Keep the case in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use.
- Bit Inspection: Periodically inspect the bits for wear or damage. Replace any worn or damaged bits to ensure optimal performance and prevent damage to screws.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver does not turn on. | Battery is depleted. | Charge the screwdriver using the USB-C cable. |
| Screwdriver lacks sufficient torque. | Screw is too tight for electric mode. | Apply manual force to the screwdriver to loosen or tighten the screw. Ensure the correct bit size is used. |
| Bits fall out of the chuck. | Bit not fully inserted or magnetic chuck is dirty. | Ensure the bit is fully inserted. Clean the chuck area if debris is present. |
| LED light does not turn on. | Screwdriver is not operating or battery is low. | Ensure a button is pressed to activate the motor. Charge the battery if low. |
Specifications
| Feature | Specification |
|---|---|
| Brand | DOINOW |
| Model Name | power screwdriver cordless rechargeable-B1 |
| Material | Alloy Steel, Aluminum |
| Color | Green |
| Electric Torque | 0.2 Newton Meters |
| Manual Torque | 3 Newton Meters |
| Speed | 200 RPM |
| Battery Type | Lithium Ion (350mAh) |
| Charging Port | USB-C |
| Number of Bits | 48 |
| Bit Material | S2 Steel |
| Dimensions (L x W x H) | 8.11 x 3.15 x 0.98 inches |
| Item Weight | 1.03 Ounces |
| Special Features | Wireless Rechargeable, LED light, Magnetic Storage, Pop-up Mechanism Case |
Warranty and Support
DOINOW provides a 2-year free warranty and replacement service for this Mini Electric Screwdriver. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided in the original product packaging or contact DOINOW customer service directly through the retailer where the product was purchased.
For additional resources, you may also refer to the official user guide PDF available online: User Guide (PDF)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.