1. Introduction
Thank you for choosing the La Crosse Technology Equity Model 14077 Analog Alarm Clock. This battery-operated clock is designed for reliable timekeeping and features a loud alarm and glow-in-the-dark elements for enhanced visibility. This manual provides detailed instructions for its proper setup, operation, and care.
Figure 1.1: Front view of the La Crosse Technology Equity 14077 Analog Alarm Clock, showing its black casing, white dial, and glow-in-the-dark numbers and hands.
2. Setup
2.1 Battery Installation
The Equity 14077 clock requires one (1) AA alkaline battery (not included) for operation. Follow these steps to install the battery:
- Locate the battery compartment cover on the back of the clock.
- Remove the battery compartment cover by sliding or lifting it off.
- Insert one fresh AA alkaline battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery compartment cover securely.
Note: Always use fresh batteries. Do not mix old and new batteries or different types of batteries. Remove batteries if the clock will not be used for an extended period.
2.2 Initial Time Setting
After installing the battery, set the current time:
- Locate the Time Set Knob on the back of the clock.
- Rotate the Time Set Knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Figure 2.1: Angled view of the clock, illustrating the general location of control knobs on the back or side for time and alarm settings.
3. Operation
3.1 Setting the Alarm
To set the alarm time:
- Locate the Alarm Set Knob on the back of the clock.
- Rotate the Alarm Set Knob to move the small alarm hand to your desired wake-up time.
- Locate the Alarm ON/OFF Switch (often a small slide switch) on the back or side of the clock.
- Slide the switch to the "ON" position to activate the alarm. Slide it to "OFF" to deactivate.
When the alarm is set to "ON", it will sound at the set time with a loud beep. To stop the alarm, slide the Alarm ON/OFF Switch to the "OFF" position.
3.2 Glow-in-the-Dark Feature
The clock features luminescent numbers and hands that glow in low-light conditions. This feature is passive and does not require additional power. The intensity and duration of the glow depend on the amount of light exposure the clock receives during the day.
4. Maintenance
4.1 Cleaning
To clean your clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the clock's finish or internal components.
4.2 Battery Replacement
Replace the AA battery annually or when the clock's timekeeping becomes inaccurate or the alarm weakens. Follow the battery installation steps in Section 2.1.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock not working or time is incorrect. | Battery is dead or incorrectly installed. | Replace with a fresh AA alkaline battery, ensuring correct polarity. |
| Alarm does not sound. | Alarm is not activated or battery is low. | Ensure the Alarm ON/OFF Switch is in the "ON" position. Replace battery if needed. |
| Glow-in-the-dark feature is dim or not visible. | Insufficient light exposure during the day. | Place the clock in an area that receives adequate light exposure during the day to charge the luminescent material. |
6. Specifications
Figure 6.1: Product dimensions of the Equity 14077 clock.
- Model: 14077
- Brand: La Crosse Technology
- Color: White and Black
- Display Type: Analog
- Special Feature: Alarm, Glow-in-the-dark hands and numbers
- Product Dimensions: 4"W x 4.5"H
- Power Source: 1 x AA Alkaline Battery (not included)
- Room Type: Indoor (Bedroom, Office, Travel)
- Shape: Round
- Material: Plastic
- Item Weight: 3.04 ounces
- UPC: 047404140772
- ASIN: B0BWSL24FV
7. Warranty and Support
7.1 Manufacturer's Warranty
This La Crosse Technology Equity 14077 Analog Alarm Clock is covered by a 2-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For specific details regarding warranty claims, please refer to the official La Crosse Technology website or contact customer support.
7.2 Customer Support
For assistance with setup, operation, troubleshooting, or warranty inquiries, please contact La Crosse Technology customer support. Our USA-based support team is available to help you.
- Online Resources: Visit the La Crosse Technology website for FAQs, product manuals, and video tutorials.
- Contact Information: Refer to the packaging or the official website for the most current contact details (phone, email, or chat support).
