Product Overview
The Walrus Audio Fundamental Series Tremolo pedal is designed to deliver classic optical tremolo effects, ranging from smooth and subtle to glitchy and wild. Part of the Fundamental Series, this pedal offers simplified controls while maintaining professional tonal integrity. It features three sliders for sound adjustment and a three-way switch for mode selection.
Image: Walrus Audio Fundamental Series Tremolo Pedal, front view.
Setup
Power Requirements
The Fundamental Series Tremolo pedal requires a minimum of 100mA of power. Use a standard 9-volt DC power supply with a center-negative plug.
Connections
Connect your instrument or previous effects pedal to the 1/4 inch (6.35mm) audio input jack. Connect the 1/4 inch (6.35mm) audio output jack to your amplifier or next effects pedal in the signal chain. Ensure all connections are secure before powering on the device.
Operating Instructions
Controls
- Rate: This slider controls the speed of the tremolo effect. Move the slider up for faster modulation and down for slower modulation.
- Depth: This slider adjusts the intensity or depth of the tremolo effect. Higher settings result in a more pronounced volume fluctuation.
- Volume: This slider sets the overall output volume of the pedal. Use it to balance the effect's volume with your dry signal or to provide a slight boost.
Image: Close-up view of the Walrus Audio Fundamental Series Tremolo pedal, highlighting the Rate, Depth, and Volume sliders.
Modes
The three-way toggle switch allows you to select between different tremolo modes:
- Sine: Provides a smooth, undulating tremolo effect.
- Square: Delivers a choppy, on/off tremolo effect.
- Random: Creates an unpredictable, glitchy tremolo with varied rates and depths.
Video: Official demonstration of the Walrus Audio Fundamental Series Tremolo pedal, showcasing its various modes and sounds.
Specifications
| Feature | Detail |
|---|---|
| Item Model Number | 900-1079 |
| Item Weight | 8.4 ounces (238 Grams) |
| Product Dimensions | 5.55 x 4.5 x 2.85 inches |
| Power Source | Corded Electric |
| Voltage | 9 Volts |
| Amperage | 100 Milliamps minimum |
| Connector Type | 1/4 inch (6.35mm) audio jack |
| Hardware Interface | 1/4-inch Audio |
| Signal Format | Analog |
Troubleshooting
If you experience any issues with your Walrus Audio Fundamental Series Tremolo pedal, please ensure all connections are secure and the power supply meets the specified requirements. Test with different cables and power sources if possible.
Maintenance
Keep the pedal clean and free from dust and moisture. Avoid exposing the pedal to extreme temperatures or direct sunlight. Do not attempt to open the pedal enclosure, as this may void your warranty.
Warranty and Support
For warranty information or technical support, please refer to the official Walrus Audio website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
