ARDES AR4C06 KALOR 1500W Electric Convector Heater User Manual

1. Introduction and Safety Information

Thank you for choosing the ARDES AR4C06 KALOR Electric Convector Heater. This manual provides important information for the safe and efficient use of your appliance. Please read these instructions carefully before use and keep them for future reference.

Important Safety Instructions

• Read all instructions before using this heater.
• Do not use this heater in the immediate vicinity of a bath, shower, or swimming pool.
• Do not use this heater if it has been dropped.
• Do not use if there are visible signs of damage to the heater.
• Use this heater on a horizontal and stable surface.
• Keep combustible materials such as furniture, curtains, and other flammable items at least 1 meter (3 feet) from the front and sides of the heater.
• Do not cover the heater. Covering the heater can cause overheating.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Unplug the heater when not in use.

2. Product Overview

The ARDES AR4C06 KALOR is a portable electric convector heater designed for efficient heating of rooms up to 45 m³.

Components

• Main Heater Unit
• Power Level Selector Knob
• Thermostat Control Knob
• Integrated Carry Handle
• Stable Feet

Figure 1: ARDES AR4C06 KALOR Electric Convector Heater. This image displays the ARDES AR4C06 KALOR Electric Convector Heater. It is a white rectangular unit with black control knobs on the side and black feet for stability. The top features a grille for heat emission, and the ARDES logo is visible on the front panel.

Key Features

• Two Power Levels: Select between 1300W and 1500W for varied heating needs.
• Adjustable Thermostat: Maintain your desired room temperature automatically.
• Anti-Overheating Protection: Automatically shuts off the unit if it overheats, ensuring safety.
• Portable Design: Lightweight (2.7 kg) with an integrated handle for easy relocation.
• Rapid Heating: Convection technology provides quick and uniform heat distribution.

3. Setup

Unpacking

1. Carefully remove the heater from its packaging.
2. Check for any signs of damage. If the heater is damaged, do not use it and contact your retailer.
3. Retain the packaging for storage or disposal.

Placement

• Place the heater on a firm, level surface.
• Ensure there is at least 1 meter (3 feet) of clear space around the heater from walls, furniture, curtains, and other objects to allow for proper air circulation and prevent fire hazards.
• Do not place the heater directly below a power outlet.
• Avoid placing the heater in areas where it could be easily knocked over.

Power Connection

• Ensure the power level selector and thermostat control knobs are in the 'OFF' or minimum position before plugging in.
• Plug the power cord into a suitable 220-240V AC electrical outlet.

4. Operation

Figure 2: Control Knobs. This image shows a close-up of the two control knobs on the side of the ARDES AR4C06 KALOR heater. The top knob is for thermostat control, and the bottom knob is for power level selection.

Powering On and Selecting Heat Level

1. Ensure the heater is plugged into a power outlet.
2. Turn the Power Level Selector Knob (bottom knob) to your desired heat setting:
   
   • Setting 1: Low heat (approximately 1300W)
   • Setting 2: High heat (approximately 1500W)
3. The heater will begin to emit heat.

Adjusting the Thermostat

1. Once the heater is operating at a chosen power level, turn the Thermostat Control Knob (top knob) clockwise to increase the desired temperature or counter-clockwise to decrease it.
2. The heater will cycle on and off to maintain the set temperature. If the room temperature falls below the set level, the heater will activate. Once the room reaches the set temperature, the heater will turn off.

Powering Off

• To turn off the heater, rotate the Power Level Selector Knob to the 'OFF' position.
• Unplug the heater from the wall outlet when not in use for extended periods.

5. Maintenance

Cleaning

• Always unplug the heater and allow it to cool completely before cleaning.
• Wipe the exterior surfaces of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Do not immerse the heater in water or any other liquid.
• Ensure no water enters the interior of the heater.

Storage

• If storing the heater for an extended period, clean it thoroughly.
• Store the heater in its original packaging in a cool, dry place.
• Do not place heavy objects on top of the heater during storage.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. ARDES products are designed for reliability and performance.

For technical support or service inquiries, please contact ARDES customer service through their official website or the contact details provided with your product.