User Manual for Allimity YKR-K/002E Replaced Remote Control

Introduction

This manual provides instructions for the Allimity YKR-K/002E Replacement Remote Control, designed to operate various AUX Air Conditioner models. This remote is a direct replacement and requires no complex setup or programming.

Compatible AUX Air Conditioner Models include: YK-K/002E, YKR-K/204E, YK-K/001E, YKR-K204E, and YKR-K/001E.

Product Overview

Figure 1: Front view of the remote control, showing the display screen and all primary function buttons including Mode, Speed, On/Off, Timer, Swing, and others.

Figure 2: Angled perspective of the remote control, highlighting its ergonomic design and button layout from a side view.

Figure 3: A different angled view of the remote, providing a clear look at the button arrangement and the overall slim profile.

Figure 4: Rear view of the remote control with the battery cover removed, showing the compartment for two AAA batteries and the model number label.

Setup

1. Battery Installation:

   Locate the battery compartment on the back of the remote control. Slide the battery cover downwards to open it. Insert two (2) AAA alkaline batteries, ensuring correct polarity (+ and -) as indicated inside the compartment. Replace the battery cover by sliding it back into place until it clicks securely.

   Note: Batteries are not included with the remote control.

2. No Programming Required:

   This replacement remote control is pre-programmed and does not require any setup or pairing with your AUX Air Conditioner. Once batteries are installed, it is ready for immediate use.

Operating Instructions

To operate your AUX Air Conditioner, point the remote control directly towards the air conditioner's infrared receiver. Ensure there are no obstructions between the remote and the air conditioner.

• Power On/Off: Press the ON/OFF button to turn the air conditioner on or off.
• Mode Selection: Use the MODE button to cycle through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
• Temperature Adjustment: Use the SET buttons (up/down arrows) to increase or decrease the desired temperature.
• Fan Speed: Press the SPEED button to adjust the fan speed.
• Timer Function: Use the TIMER button to set or cancel the timer for automatic on/off operations.
• Swing Function: The SWING and SWING2 buttons control the louver movement for air distribution.
• Special Functions: Buttons such as STRONG, FEELING, CLEAN, HEALTH, SLEEP, and SCREEN FUNGUSPROOF activate specific features of your air conditioner, if supported. Refer to your air conditioner's manual for details on these functions.

Troubleshooting

• Remote not responding:
  • Ensure batteries are inserted correctly with proper polarity.
  • Replace old batteries with new AAA alkaline batteries.
  • Check if there are any obstructions between the remote and the air conditioner's receiver.
  • Ensure you are within the effective range of the air conditioner's infrared receiver.
• Certain functions not working:
  • Verify that your specific AUX Air Conditioner model supports the function you are trying to use. Some advanced functions may not be available on all models.
  • Consult your air conditioner's original user manual for compatibility and detailed function descriptions.

Specifications

Warranty and Support

This Allimity remote control comes with a 60-day warranty from the date of purchase.

For any issues or inquiries regarding your remote control, please contact the seller or the manufacturer, YUEDAXINFACTORY, through the platform where the purchase was made. Please have your order details ready for faster assistance.