WORKPRO Cordless Electric Scissors User Manual

1. Introduction

Thank you for choosing the WORKPRO Cordless Electric Scissors. This powerful and versatile cutting tool is designed to make your cutting tasks easier and more efficient. With its ergonomic design, rechargeable battery, and interchangeable blades, it's perfect for a wide range of materials and applications.

The WORKPRO Cordless Electric Scissors, complete with a carrying case and charging cable.

Package Contents:

• 1 x 4V Electric Scissor Unit
• 1 x O-Blade (for flexible, softer materials)
• 1 x D-Blade (for rigid, tougher materials)
• 1 x USB Charging Cable
• 1 x Storage Box
• 1 x User Manual

2. Safety Information

Please read all safety warnings and instructions carefully before using the product to avoid electric shock, fire, and serious injury.

• Always keep the work area clean and well-lit.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating the electric scissors.
• Avoid accidental starting. Ensure the safety button is engaged before handling or transporting the tool.
• Do not overreach. Maintain proper footing and balance at all times.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
• Use personal protective equipment. Always wear eye protection.
• Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing power tools.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation.
• Use the power tool, accessories, and tool bits in accordance with these instructions, taking into account the working conditions and the work to be performed.

Safety Switch:

The WORKPRO Electric Scissors are equipped with a safety button located at the top of the unit. This button must be pressed first before the main handle button can be engaged to start the tool. Releasing the handle button will stop the operation, preventing accidental activation and enhancing user safety.

The safety button ensures the tool is not accidentally activated.

3. Setup

Charging the Battery:

The electric scissors are powered by a 4V 2000mAh lithium battery, providing approximately 45 minutes of continuous work on a full charge. Before first use, fully charge the battery.

1. Locate the USB Type-C charging port on the back of the scissor unit.
2. Connect the provided USB charging cable to the port.
3. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port.
4. The battery capacity indicator light will illuminate during charging. Once fully charged, the light may change color or turn off depending on the charger.

Connect the USB-C cable to the charging port for convenient power replenishment.

Installing/Changing Blades:

The WORKPRO Electric Scissors come with two types of blades for different cutting needs: the O-blade and the D-blade. Ensure the unit is turned off and the safety button is engaged before changing blades.

1. To remove a blade: First, pull the blade release button (located near the blade) back, and then slide the blade unit out from the front of the scissors.
2. To install a blade: Line up the new blade unit with the ribs on the tool and slide it onto the tool until the release button clicks into place, securing the blade.

Follow these steps for easy blade changing and installation.

4. Operating Instructions

Powering On/Off:

To operate the electric scissors, first press the safety button located on the top of the unit. While holding the safety button, press the main handle button to activate the cutting blades. Release the handle button to stop the cutting action.

Blade Types and Recommended Usage:

The WORKPRO Electric Scissors include two specialized blades to handle a variety of materials:

• O-Blade: Designed for cutting flexible, softer materials. Ideal for fabric, leather, paper, plastic sheets, and similar items.
• D-Blade: Designed for cutting rigid, tougher materials. Best suited for corrugated cardboard, solid cardboard, carpet, and thin tin/aluminum sheets.

Choose the appropriate blade for your material to ensure optimal cutting performance.

General Cutting Tips:

• Ensure the material is flat and stable before cutting.
• Guide the scissors smoothly along your desired cutting line. The tool is capable of cutting both curved and straight lines.
• Do not force the scissors through overly thick or hard materials that exceed their capacity.
• The ergonomic design and lightweight nature (approx. 0.66 lbs) allow for comfortable and prolonged use without significant hand fatigue.

The ergonomic design helps reduce hand fatigue during extended use.

Product in Action:

5. Maintenance

Cleaning:

After each use, ensure the tool is turned off and unplugged. Use a dry cloth to wipe down the blades and the body of the scissors. Remove any debris or material residue from the blades to maintain optimal cutting performance. Do not use harsh chemicals or abrasive cleaners.

Blade Replacement:

Blades may become dull over time with regular use. Refer to the 'Installing/Changing Blades' section (Section 3) for detailed instructions on how to safely replace the cutting blades.

6. Troubleshooting

If you encounter any issues with your WORKPRO Cordless Electric Scissors, please refer to the following common troubleshooting steps:

• Tool not turning on: Ensure the battery is fully charged. Confirm that both the safety button and the main handle button are pressed simultaneously.
• Blades not cutting effectively: Check if the correct blade type (O-blade or D-blade) is installed for the material you are cutting. Inspect the blades for any damage or dullness; replace if necessary. Ensure no material is jammed in the blade mechanism.
• Battery not charging: Verify that the USB cable is securely connected to both the scissors and the power source. Try a different USB port or power adapter.
• Unusual noise during operation: Stop using the tool immediately. Check for any loose parts or obstructions around the blades. If the noise persists, contact customer support.

For issues not covered here, please contact WORKPRO customer support.

7. Product Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the warranty card included in your product packaging or visit the official WORKPRO website. You may also contact WORKPRO customer service directly for assistance with product operation, maintenance, or troubleshooting.