HEXBUG BattleBots Arena User Manual

1. Introduction

Welcome to the ultimate robot showdown! This manual provides essential information for setting up, operating, and maintaining your HEXBUG BattleBots Arena featuring Bite Force and Blacksmith. This set is designed to bring the excitement of robotic combat into your home, offering an engaging experience for users aged 8 and up.

Image 1.1: The HEXBUG BattleBots Arena set, featuring the arena, Bite Force, and Blacksmith robots.

2. What's in the Box

Your HEXBUG BattleBots Arena package includes the following components:

• 1 HEXBUG BattleBots Arena (fold-out game board, protective walls, 2 push-activated pulverizing hammers)
• 1 Bite Force Remote Control Robot
• 1 Blacksmith Remote Control Robot
• 2 Remote Controllers
• Magnetic armor pieces for battle damage simulation
• Batteries (4 AAA batteries required, included)

3. Important Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

• Recommended for ages 8 and up.
• Adult supervision is recommended during play.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Batteries should be inserted with the correct polarity.
• Remove batteries from the product when not in use for extended periods.
• Keep fingers and hair away from moving parts of the robots and arena mechanisms.

4. Setup Guide

4.1 Arena Assembly

1. Unfold the game board and lay it flat on a stable surface.
2. Assemble the protective walls by interlocking the pieces around the perimeter of the game board. Ensure all connections are secure.
3. Attach the two push-activated pulverizing hammers to their designated slots on the arena walls.

Image 4.1: Illustration of the interlocking floor tile assembly and arena walls.

4.2 Robot Preparation

Attach the magnetic armor pieces to your Bite Force and Blacksmith robots. These pieces are designed to simulate battle damage by flying off upon impact, adding to the realistic combat experience.

Image 4.2: Blacksmith and Bite Force robots demonstrating snap-together pieces that detach upon impact.

4.3 Battery Installation

The HEXBUG BattleBots Arena set includes all necessary batteries. Follow these steps to install them:

1. For Robots (Bite Force & Blacksmith): Locate the battery compartment on the underside of each robot. Use a small screwdriver to open the compartment. Insert 3 AAA/R03 1.5V batteries into each robot, ensuring correct polarity (+/-). Close the compartment securely.
2. For Remote Controllers: Locate the battery compartment on the back of each controller. Open the compartment and insert 2 AAA/R03 1.5V batteries into each controller, ensuring correct polarity (+/-). Close the compartment securely.

Image 4.3: Detailed diagram illustrating the correct battery placement for both the robots and their remote controllers.

5. Operating Instructions

5.1 Powering On and Pairing

1. Turn on each robot using the power switch located on its underside.
2. Turn on each remote controller. The controllers are pre-paired with their respective robots. If pairing issues occur, ensure both the robot and controller are off, then turn the robot on, followed by the controller.

5.2 Basic Controls

Each remote controller features joysticks and buttons for controlling your BattleBot:

• Left Joystick: Controls forward and backward movement.
• Right Joystick: Controls turning left and right.
• Attack Buttons: Activate the robot's unique weapon.

5.3 Engaging in Battle

1. Place both Bite Force and Blacksmith robots inside the arena.
2. Use your remote controller to maneuver your robot, aiming to strike your opponent.
3. Activate your robot's weapon to inflict damage. Bite Force features a powerful vertical spinner, while Blacksmith utilizes a devastating hammer.
4. The magnetic armor pieces will detach upon significant impact, simulating battle damage. Reattach them to continue the fight.
5. Utilize the arena's pulverizing hammers by pushing the activation buttons on the walls to add an extra layer of challenge and strategy.
6. The last robot with its armor intact or still operational wins the round.

Image 5.1: Children engaging with the BattleBots Arena, demonstrating the interactive play experience.

Note: No official product videos from the seller were available for embedding in this manual.

6. Maintenance

6.1 Cleaning

• Wipe down the arena, robots, and controllers with a dry, soft cloth.
• Do not use water or cleaning solutions, as this may damage electronic components.

6.2 Storage

• Store the BattleBots Arena and its components in a cool, dry place away from direct sunlight.
• If storing for an extended period, remove all batteries from the robots and controllers to prevent leakage.

7. Troubleshooting

8. Specifications

• Product Dimensions: 4.72 x 3.15 x 1.97 inches (robots, approximate)
• Item Weight: 3.69 pounds (entire package)
• Item Model Number: 6069046
• Manufacturer Recommended Age: 8 years and up
• Batteries: 4 AAA batteries required (included) - 3 for each robot, 2 for each controller.
• Manufacturer: Spin Master
• Release Date: January 28, 2025

9. Warranty and Support

This product is covered by the Spin Master Care Commitment. For detailed warranty information, product support, or to address any concerns, please refer to the official Spin Master website or contact their customer service directly. Contact information can typically be found on the product packaging or the manufacturer's official website.

Please retain your proof of purchase for warranty claims.