1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Tvilum Wardrobe with 2 Sliding Doors. This wardrobe is designed for clothing storage in bedrooms and other living spaces, featuring two sliding doors for efficient access to its contents. Please read this manual thoroughly before proceeding with assembly or use to ensure proper function and longevity of your product.

Image 1.1: Front view of the Tvilum Wardrobe with 2 Sliding Doors.
2. Safety Information
Adhere to the following safety guidelines to prevent injury or damage to the product:
- Read all instructions carefully before assembly and use.
- Ensure all components are securely fastened during assembly to prevent instability.
- Do not exceed the maximum weight limit for the hanging rod (24 lbs) or shelves.
- For enhanced stability, consider wall-mounting the wardrobe if specified in the separate assembly instructions.
- Keep small parts and packaging materials away from children.
3. Package Contents
Before beginning assembly, verify that all parts are present and undamaged. Refer to the separate assembly guide included with your product for a detailed list of components and hardware. Key components typically include:
- Wardrobe panels (sides, top, bottom, back)
- Sliding doors
- Door handles
- Fixed shelves
- Hanging rod
- Assembly hardware (screws, dowels, cam locks, etc.)

Image 3.1: Interior view showing fixed shelves and hanging rod.
4. Assembly Instructions
Assembly of the Tvilum Wardrobe is required. Detailed, step-by-step instructions and diagrams are provided in a separate assembly guide included with your product. Please follow that guide precisely.
- It is recommended to assemble the wardrobe on a soft, clean surface to prevent scratches.
- Two people are recommended for assembly to ensure safety and ease of construction.
- Ensure all connections are tightened securely, but do not overtighten.
- For optimal stability and safety, follow any wall-mounting instructions provided in the assembly guide.

Image 4.1: Rear view of the wardrobe, illustrating panel assembly.
5. Setup
Proper placement of your wardrobe contributes to its stability and functionality.
- Choose a level surface for placement. Uneven surfaces can affect door alignment and overall stability.
- Position the wardrobe away from direct sunlight and heat sources to prevent material degradation and discoloration.
- Ensure adequate space around the wardrobe for the sliding doors to operate freely without obstruction.
6. Operating Instructions
6.1. Sliding Doors
The wardrobe features two sliding doors for access to the interior compartments.
- To open or close a door, gently slide it along its track using the integrated handles. Avoid forcing the doors.
- Ensure the doors are properly seated in their tracks for smooth and quiet operation.

Image 6.1: Detail of a sliding door handle.
6.2. Storage
The wardrobe includes two fixed shelves and one hanging rod for organized storage.
- The hanging rod is designed to hold up to 24 lbs of clothing.
- Distribute weight evenly across shelves and the hanging rod to maintain stability and prevent warping.

Image 6.2: Detail of the hanging rod and shelf support.
7. Maintenance
7.1. Cleaning
- Wipe surfaces with a soft, damp cloth.
- Avoid abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish.
- Dry immediately with a clean, soft cloth to prevent water spots.
7.2. General Care
- Periodically check all screws and fittings to ensure they remain tight. Retighten as necessary.
- Inspect door tracks for any debris (dust, lint) that might hinder smooth operation. Clean as needed using a soft brush or vacuum.
8. Troubleshooting
8.1. Doors do not slide smoothly or come off tracks
- Check Level Surface: Ensure the wardrobe is placed on a completely level surface. Unevenness can cause door misalignment. Adjust the wardrobe's position or use shims if necessary.
- Inspect Tracks: Examine the top and bottom door tracks for any obstructions (e.g., dust, small objects) or damage. Clean or clear as needed.
- Verify Installation: Confirm that the doors are correctly installed in both the top and bottom tracks. Refer to the assembly guide for proper door installation steps.
- Tighten Hardware: Ensure all assembly hardware related to the door mechanism (rollers, guides, track fasteners) is securely tightened.
8.2. Wardrobe feels unstable
- Tighten Fasteners: Confirm all assembly screws, cam locks, and other fasteners are fully tightened throughout the entire structure.
- Level Surface: Ensure the wardrobe is placed on a flat, level surface.
- Wall Anchoring: If applicable and recommended in the assembly guide, ensure the wardrobe is securely anchored to the wall using the provided hardware to prevent tipping.
9. Specifications
| Brand | Tvilum |
| Model Name | Tvilum Wardrobe with 2 Sliding Doors |
| Model Number | 703884949 |
| UPC | 843029115399 |
| Product Dimensions (D x W x H) | 19" x 30.55" x 69.06" (48.26cm x 77.6cm x 175.4cm) |
| Item Weight | 90.83 lbs (41.2 kg) |
| Material | Engineered Wood |
| Color | White |
| Door Style | Sliding |
| Number of Compartments | 2 |
| Number of Levels | 3 (includes bottom, 2 fixed shelves) |
| Hanging Rod Weight Limit | 24 lbs |
| Total Weight Limit | 95 lbs |
| Assembly Required | Yes |

Image 9.1: Technical drawing showing wardrobe dimensions.
10. Warranty and Support
For warranty information or technical support regarding your Tvilum Wardrobe, please refer to the documentation included with your purchase. Contact details for Tvilum customer service are typically available on the manufacturer's official website or product packaging. Please have your model number (703884949) and purchase date available when contacting support.