Homirxan 1.2 Cub Digital Home Safe Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Homirxan 1.2 Cub Digital Home Safe. Please read this manual thoroughly before using the safe to ensure proper function and security.

The Homirxan 1.2 Cub Digital Home Safe is designed to secure your valuables with a programmable keypad and emergency key access. It features a robust steel construction, an alarm system, and a removable internal shelf for organized storage. This safe is designed to be fire resistant and water resistant.

Package Contents

Upon opening the package, verify that all components are present:

• 1 x Homirxan 1.2 Cub Digital Home Safe
• 2 x Emergency Keys
• 4 x Expansion Screws (for mounting)
• 1 x Instruction Manual

Image: Contents of the Homirxan safe package, including the safe, emergency keys, expansion screws, and manual.

Setup

1. Initial Opening

For the first use, the safe must be opened using an emergency key as the keypad is not yet programmed.

1. Locate the emergency keyhole, usually concealed behind the keypad or a small cover.
2. Insert one of the provided emergency keys into the keyhole.
3. Turn the key clockwise while simultaneously turning the knob clockwise to open the safe door.
4. Keep the emergency keys in a secure location outside the safe.

2. Battery Installation

The safe requires 4 AA batteries (not included) to power the electronic keypad.

1. Open the safe door.
2. Locate the battery compartment on the inside of the door.
3. Insert 4 new AA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover.

3. Setting Your Passcode

You can set a personal passcode of 3 to 8 digits.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinge. You will hear a beep.
2. Within 5 seconds, enter your desired 3-8 digit passcode on the keypad.
3. Press the "#" or "*" button to confirm. You will hear a confirmation beep.
4. Test the new passcode with the door open before closing it.

4. Mounting the Safe (Optional)

For enhanced security, the safe can be mounted to a wall or floor using the provided expansion screws.

1. Choose a suitable location for mounting.
2. Mark the drilling points through the pre-drilled holes at the back or bottom of the safe.
3. Drill pilot holes in the wall or floor.
4. Align the safe with the drilled holes and secure it using the expansion screws.

Image: Diagram illustrating the three steps for wall-mounted installation of the safe.

Operating Instructions

1. Opening the Safe with Passcode

1. Enter your 3-8 digit passcode on the keypad.
2. Press the "#" or "*" button to confirm.
3. If the passcode is correct, a green light will illuminate, and you will hear a beep.
4. Within 5 seconds, turn the knob clockwise to open the safe door.

2. Opening the Safe with Emergency Key

This method is used for initial opening, forgotten passcodes, or dead batteries.

1. Locate the emergency keyhole.
2. Insert an emergency key and turn it clockwise.
3. Simultaneously turn the knob clockwise to open the safe door.

3. Opening with Emergency Battery Box (if batteries are dead)

If the internal batteries are completely drained, an external emergency battery box (not included, or may be a proprietary connector) can be used to power the keypad temporarily.

1. Connect the emergency battery box to the external power port on the keypad.
2. Enter your passcode on the keypad.
3. Press the "#" or "*" button to confirm.
4. Turn the knob clockwise to open the safe door.
5. Replace the internal batteries immediately after opening.

Image: Visual guide showing three methods to open the safe: using a passcode, using an emergency key, and using an emergency battery box with a passcode.

4. Using the Removable Shelf

The safe includes a removable shelf to help organize items of different sizes.

• To install: Position the shelf on the internal supports.
• To remove: Lift the shelf and slide it out.

Image: Depicts the safe interior with and without the removable shelf, showing how it accommodates various items like cameras, cash, documents, and handguns.

Maintenance

1. Battery Replacement

Replace batteries when the low battery indicator illuminates or if the keypad becomes unresponsive. Always use 4 new AA batteries.

1. Open the safe door.
2. Open the battery compartment on the inside of the door.
3. Remove old batteries and insert 4 new AA batteries, observing correct polarity.
4. Close the battery compartment cover.

2. Cleaning

Wipe the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or keypad.

3. Key Care

Store emergency keys in a secure location away from the safe. Do not store them inside the safe. If a key is lost, contact customer support with the unique number found on the keyhole for assistance.

Troubleshooting

Specifications

Safety Information

To ensure safe operation and prevent unauthorized access:

• Always keep emergency keys in a secure location outside the safe.
• Do not share your passcode with unauthorized individuals.
• Regularly check battery levels and replace them as needed.
• Mounting the safe to a wall or floor is recommended for increased security.

Image: Illustrates the safe's role in keeping items secure from children or unauthorized individuals, showing icons for firearms, medicine, and general valuables.

Warranty and Support

Homirxan provides customer support for any questions or issues you may encounter with your safe. For warranty information or technical assistance, please refer to the contact details provided at the point of purchase or on the manufacturer's official website.

If you have questions, please contact us again.