Introduction
Thank you for choosing the BRPOM BM150 Portable Car Jump Starter. This device is designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for your electronic devices. Please read this manual thoroughly before use to ensure safe and optimal performance.
Safety Information
Always observe the following safety precautions to prevent injury or damage to the device or vehicle:
- Do not attempt to jump start a vehicle with a non-12V battery.
- Ensure proper polarity connection (red clamp to positive, black clamp to negative).
- Do not short-circuit the smart clamps.
- Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
- Keep out of reach of children.
- Do not disassemble or modify the device.
- If the battery clamps touch each other, the smart protection will activate, preventing sparks.
- Always disconnect the clamps from the vehicle battery first, then from the jump starter, after a successful jump start.
Package Contents
- BRPOM BM150 Portable Lithium Battery Power Supply
- 12V Smart Battery Clamps
- Micro USB Charging Cable (adapter not included)
- User Manual
Image: BRPOM BM150 jump starter, smart clamps, micro USB cable, and user manual, with dimensions indicated.
Product Overview
The BRPOM BM150 is a multi-functional device featuring a powerful jump starter, a portable power bank, and an emergency LED flashlight.
Image: The BRPOM BM150 portable jump starter unit shown with its red and black smart battery clamps. The device is compact and features a power button and indicator lights.
Key Features:
- Jump Starter: 1500A peak current, capable of starting 12V vehicles (up to 7.0L gasoline or 5.5L diesel engines).
- Portable Power Bank: 15800mAh capacity with dual USB outputs (5V/3A, 9V/2A; 12V/1.5A) for charging mobile devices.
- LED Flashlight: 4 modes (illumination, flash, SOS, warning).
- Emergency Tool: Integrated window breaker.
- Smart Protection: 8 types of advanced safety protections including reverse polarity, short circuit, over-discharge, overheating, overcurrent, overcharge, overvoltage, and overload.
Setup
Initial Charging
Before first use, fully charge the BRPOM BM150 jump starter. Connect the micro USB charging cable to the device's input port and a USB power adapter (not included). The indicator lights will show the charging progress. Ensure the device is charged above 50% before attempting to jump start a vehicle.
Image: Step 1 of the jump-starting process, showing the device being charged and emphasizing the need for over 50% power.
Operating Instructions
1. Jump Starting a Vehicle
- Ensure Sufficient Charge: Make sure the jump starter has at least 50% battery charge.
- Connect Smart Clamps: Insert the blue plug of the smart battery clamps into the jump starter's output port. Ensure a secure connection.
- Connect to Vehicle Battery:
- Attach the RED positive (+) clamp to the vehicle's positive (+) battery terminal.
- Attach the BLACK negative (-) clamp to the vehicle's negative (-) battery terminal.
The smart clamps will indicate a correct connection (usually a solid green light). If an error is detected (e.g., reverse polarity), an alarm may sound, and an indicator light will show red. Correct the connection immediately.
- Start the Vehicle: Once the clamps are correctly connected and the smart cable indicates readiness, start your vehicle's engine.
- Disconnect Clamps: After the vehicle starts, immediately remove the smart clamps from the vehicle battery, then disconnect the clamps from the jump starter.
Image: The BRPOM jump starter connected to a car battery, illustrating the quick and easy process to connect, prepare, and start a car in seconds.
Image: An illustration showcasing the versatility of the BRPOM BM150 jump starter, suitable for 90% of vehicle models. It is compatible with 12V vehicles, including gasoline engines up to 7.0L and diesel engines up to 5.5L. Examples of supported vehicles include small cars, light trucks (12V), SUVs, small vans, delivery vans, and motorcycles.
2. Using as a Portable Power Bank
The BRPOM BM150 features two USB output ports to charge your electronic devices.
- Connect your device's USB charging cable to one of the jump starter's USB output ports.
- The device will automatically begin charging.
- Output specifications: 5V/3A, 9V/2A; 12V/1.5A.
Image: The BRPOM BM150 jump starter acting as a 15800mAh power bank, charging a smartphone and tablet via its USB outputs.
3. Using the LED Flashlight
The built-in LED flashlight offers four modes for various situations:
- Illumination: For general lighting.
- Flash: A rapid flashing light.
- SOS: Emits the international Morse code signal for distress.
- Warning: A distinct warning light pattern.
Refer to the device's buttons for activating and cycling through the flashlight modes.
Image: A wide banner image showcasing the BRPOM BM150's four LED lighting modes: warning, illumination, SOS, and flash, useful for various emergency and outdoor situations.
4. Emergency Window Breaker
The BRPOM BM150 includes an integrated window breaker for emergency situations. In case of an emergency requiring window egress, use the pointed end of the device to strike a corner of the vehicle window firmly.
Image: Close-up of the BRPOM BM150 jump starter's emergency window breaker feature, showing the sharp tip designed for glass shattering in emergencies.
Maintenance
- Recharge Regularly: To prolong battery life, recharge the jump starter at least once every three months, even if not in use.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
Image: An image illustrating the wide operating temperature range of the BRPOM BM150 jump starter, from -20°C (-4°F) to +60°C (+140°F), suitable for various climates.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start. | Jump starter battery is low. Incorrect clamp connection. Vehicle battery is severely damaged. | Recharge the jump starter. Ensure clamps are connected correctly (positive to positive, negative to negative). Consult a mechanic if vehicle battery is severely damaged. |
| Smart clamps show error/alarm. | Reverse polarity connection. Short circuit. | Immediately disconnect and re-connect clamps with correct polarity. Ensure clamps do not touch each other. |
| Device not charging. | Faulty charging cable or adapter. Input port issue. | Try a different micro USB cable and USB adapter. Contact support if issue persists. |
| USB devices not charging. | Jump starter battery is low. Faulty USB cable. Device incompatibility. | Recharge the jump starter. Try a different USB cable. Ensure your device is compatible with the output specifications. |
Image: An infographic detailing the 8 high-performance smart clip protections of the BRPOM BM150, including overcurrent, short-circuit, and reverse polarity protection.
Specifications
| Feature | Detail |
|---|---|
| Brand | BRPOM |
| Model Number | BM150 |
| Peak Current | 1500 Amps |
| Battery Capacity | 15800 mAh |
| Vehicle Compatibility | 12V vehicles, up to 7.0L Gasoline or 5.5L Diesel engines |
| USB Output 1 | 5V/3A |
| USB Output 2 | 9V/2A; 12V/1.5A |
| Product Dimensions | 18 x 9 x 4 cm |
| Product Weight | 850 g |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
Warranty and Support
The BRPOM BM150 Portable Car Jump Starter comes with a 2-year warranty from the date of purchase.
For any questions, technical assistance, or warranty claims, please contact BRPOM customer support. We provide lifetime technical support for our products.
Contact information can typically be found on the product packaging or the official BRPOM website.
