1. Introduction
Thank you for purchasing the c cattleya 2-Light Motion Sensor Ceiling Light Fixture. This fixture is designed to provide modern style, security, and safety for various covered outdoor and indoor locations such as front porches, patios, garages, and hallways. It features an integrated motion sensor with adjustable sensitivity and timer settings, offering both automatic and manual override operation modes.
Package Contents:
- 1 x c cattleya 2-Light Motion Sensor Ceiling Light Fixture
- Mounting Hardware
- Shade (Textured Glass Panels)
- Instruction Manual
Note: Light bulbs (2 x max 60W E26) are not included and must be purchased separately.
This image shows the c cattleya motion sensor ceiling light fixture installed and illuminated, highlighting its modern design and the integrated motion detection capability.
2. Important Safety Instructions
Please read all instructions carefully before installation and operation. Retain this manual for future reference.
- WARNING: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- This fixture is ETL listed, ensuring compliance with safety standards.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only bulbs of the specified type and wattage (2 x max 60W E26). Exceeding the maximum wattage may cause overheating and damage to the fixture.
- This fixture is damp location rated for covered outdoor areas. It is not suitable for direct exposure to water or submersion.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
3. Product Specifications
| Feature | Specification |
|---|---|
| Brand | c cattleya |
| Model Name | Motion Sensor Ceiling Light |
| Part Number | LA2327-FM |
| Dimensions (L x W x H) | 9.25" x 9.25" x 5.5" |
| Item Weight | 3.7 Pounds |
| Material | Glass, Metal |
| Color | Black |
| Light Fixture Form | Close to Ceiling |
| Indoor/Outdoor Usage | Indoor / Covered Outdoor (Damp Rated) |
| Power Source | Corded Electric |
| Installation Type | Flush Mount |
| Special Feature | Motion Sensor |
| Light Source Type | Compatible with LED (Bulbs not included) |
| Number of Light Sources | 2 |
| Voltage | 120 Volts |
| Max Wattage | 60 watts per bulb |
| Bulb Base | E26 |
| Color Temperature | 3000 Kelvin (dependent on bulb) |
| Control Method | App |
| Switch Type | Rocker |
| Certification | ETL Listed |
This diagram illustrates the precise measurements of the light fixture, including its length, width, and height, from both front and top perspectives. Dimensions are provided in inches.
4. Setup and Installation
Before starting installation, ensure you have all necessary tools and components. A screwdriver is typically the only tool required for installation.
This image highlights key aspects of the light's installation: it requires only one tool (a screwdriver), is suitable for damp locations, connects via hard-wiring, and does not include the light bulb.
Installation Steps:
- Turn Off Power: Locate the circuit breaker or fuse box that controls the power to the installation location. Turn off the power completely to prevent electric shock.
- Prepare Mounting Surface: Ensure the ceiling or wall surface is clean, dry, and structurally sound to support the fixture's weight.
- Attach Mounting Bracket: Use the provided mounting hardware to securely attach the fixture's mounting bracket to the junction box in the ceiling.
- Make Electrical Connections: Carefully connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are tight and secure.
- Secure Fixture: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the ceiling.
- Install Light Bulbs: Insert two E26 base light bulbs (max 60W each, not included) into the sockets.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main circuit breaker or fuse box.
5. Operating Modes and Adjustments
The c cattleya motion sensor light fixture offers two primary operating modes and adjustable settings for optimal performance.
Motion Sensor Settings:
This image shows the adjustable dials for the motion sensor. The 'TIMER' dial controls how long the light stays on after motion stops (from 5 seconds to 3 minutes), and the 'SENSITIVITY' dial adjusts the detection range (Low to High).
- TIMER: This dial adjusts the duration the light remains on after motion is no longer detected. Settings range from 5 seconds to 3 minutes. A 'Test' setting is also available for initial setup.
- SENSITIVITY: This dial controls the motion detection range. 'L' (Low) provides a shorter detection radius (approx. 9.8 ft), while 'H' (High) extends it up to 29.5 ft. The motion sensor has a maximum 360-degree detection range.
Operating Modes:
This graphic explains the two operational modes. Auto Mode activates the light only when motion is detected in darkness, turning off after a set time. Manual Override Mode keeps the light on for approximately 5.5 hours at dusk before reverting to Auto Mode.
- AUTO Mode:
- During daylight hours, the light will remain off.
- At night, the light will turn on when motion is detected within its 360-degree, 30-foot range.
- The light will stay on as long as motion is continuously detected.
- Once motion stops, the light will remain on for the predetermined time set by the TIMER dial (5 seconds to 3 minutes), then turn off.
- Manual Override Mode:
- This mode allows the light to stay on for an extended period regardless of motion.
- To activate, typically a quick double-flip of the wall switch (OFF-ON-OFF-ON) within a few seconds will engage this mode.
- The light will turn on and stay on for approximately 5.5 hours at dusk.
- After 5.5 hours, the fixture will automatically revert to AUTO Mode.
Demonstration Video:
Video 5.1: Motion Sensor Outdoor Ceiling Light Operation
This video demonstrates the functionality of the motion sensor, including how the light turns on when motion is detected and the adjustable sensitivity and timer switches. It also shows the light's appearance when active.
6. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your light fixture.
- Cleaning: To clean the fixture, simply wipe it with a damp and soft cloth.
- Do NOT use detergents or abrasives for cleaning, as these can damage the finish or glass.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool before handling.
- Regular Inspection: Periodically check for any loose connections or signs of wear.
7. Troubleshooting
If you encounter issues with your c cattleya motion sensor ceiling light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose wiring, faulty bulb, sensor obstructed, ambient light too high. | Check circuit breaker. Verify wiring connections. Replace bulbs. Ensure sensor is clear. Test in darker conditions. |
| Light stays on continuously. | Manual Override Mode active, continuous motion detected, sensor malfunction. | Cycle power to reset (turn off and on at switch). Ensure no constant motion in detection zone. If issue persists, contact support. |
| Light turns on/off too frequently. | Sensitivity too high, environmental factors (e.g., moving branches, passing cars). | Adjust SENSITIVITY dial to a lower setting. Reposition fixture if possible to minimize false triggers. |
| Motion sensor not detecting. | Sensitivity too low, sensor obstructed, incorrect mode. | Adjust SENSITIVITY dial to a higher setting. Clear any obstructions from the sensor. Ensure light is in AUTO Mode. |
8. Warranty Information
The c cattleya 2-Light Motion Sensor Ceiling Light Fixture comes with a limited warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your product or contact c cattleya customer support.
9. Customer Support
If you require further assistance or have questions not covered in this manual, please contact c cattleya customer support through the retailer's platform or visit the official c cattleya store for contact information.
Cattleya Lighting Store: https://www.amazon.com/stores/CCattleya/page/9F098060-B684-4A80-BB71-E84A904C5FEF
