Tribesigns Corner Wine Rack with Glass Holder and Storage Shelves Instruction Manual

1. Introduction

Thank you for choosing the Tribesigns Corner Wine Rack with Glass Holder and Storage Shelves. This versatile 4-tier unit is designed to optimize corner spaces, providing organized storage for wine bottles, glasses, and other bar essentials. Constructed from engineered wood and a heavy-duty metal frame, it offers both stability and a rustic industrial aesthetic. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.

2. Safety Information

Important Safety Warnings:

• Adult assembly is required for this product.
• Always securely anchor tall furniture to the wall using the provided secure strap to prevent accidental tipping.
• Keep the unit away from heavy weights or excessive loads to maintain stability.
• Ensure all screws and fasteners are tightened properly during assembly and periodically check for tightness.
• Do not allow children to climb on or play with the wine rack.

3. Parts List

Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• A. Top Shelf (1 pc)
• B. Middle Shelf (1 pc)
• C. Wine Bottle Shelf (1 pc)
• D. Bottom Shelf (1 pc)
• E. Left Frame (1 pc)
• F. Right Frame (1 pc)
• G. Back Support Bars (2 pcs)
• H. Wine Glass Holders (2 pcs)
• I. Adjustable Feet (4 pcs)
• J. Secure Strap (1 set)
• K. Screws and Fasteners (various sizes, refer to hardware bag)
• L. Allen Wrench / Screwdriver (1 pc)

Figure 3.1: Exploded view of the wine rack components with dimensions.

4. Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to assemble the unit on a soft, clean surface to prevent scratches. Do not fully tighten screws until all components are loosely fitted.

1. Step 1: Attach Adjustable Feet to Bottom Shelf

   Screw the adjustable feet (I) into the pre-drilled holes on the underside of the bottom shelf (D). Ensure they are finger-tight for now.

2. Step 2: Assemble the Frame

   Connect the left frame (E) and right frame (F) to the bottom shelf (D) using the appropriate screws (K). Do not overtighten. Ensure the 90-degree corner is correctly oriented.

   

   Figure 4.1: Detail of the frame connection and corner design.

3. Step 3: Install Wine Bottle Shelf and Middle Shelf

   Slide the wine bottle shelf (C) into its designated slots within the frame. Then, place the middle shelf (B) onto the next set of supports. Secure both shelves with screws (K), ensuring they are level.

   

   Figure 4.2: Installation of the wine bottle shelf.
4. Step 4: Attach Top Shelf and Glass Holders

   Place the top shelf (A) onto the uppermost frame supports and secure it with screws (K). Attach the wine glass holders (H) to the underside of the top shelf using the provided fasteners.

   

   Figure 4.3: Wine glass holders attached to the top shelf.

5. Step 5: Install Back Support Bars

   Attach the back support bars (G) to the rear of the frame using screws (K). These bars provide additional stability.
6. Step 6: Final Tightening and Wall Anchor

   Once all components are in place, gradually tighten all screws using the provided Allen wrench/screwdriver (L). Adjust the adjustable feet (I) to ensure the unit is stable and level on your floor. Finally, attach the secure strap (J) to the top of the unit and anchor it to the wall to prevent tipping. Refer to the secure strap instructions for proper wall mounting.

   

   Figure 4.4: Wall anchoring with the secure strap.

5. Operating Instructions

This wine rack is designed for convenient storage and display.

• Wine Bottle Storage: The dedicated wine rack section holds up to 18 standard liquor bottles horizontally. This horizontal storage method helps keep corks moist, which is beneficial for long-term wine preservation. Ensure bottle diameter is less than 3.7 inches.
• Glass Holder Usage: The integrated glass holders beneath the top shelf can accommodate 6-8 wine glasses, keeping them inverted and dust-free.
• Shelf Storage: The three open shelves provide ample space for decanters, mixed drink ingredients, additional bottles, or decorative items.

Figure 5.1: Example of the wine rack in use.

6. Maintenance

To ensure the longevity and appearance of your Tribesigns Corner Wine Rack, follow these simple maintenance guidelines:

• Cleaning: Wipe the surfaces with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Stability Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
• Leveling: If the unit becomes wobbly, adjust the adjustable feet at the bottom to re-level it on uneven surfaces.
• Avoid Overloading: Do not exceed the recommended weight capacity for each shelf or the wine bottle rack.

7. Troubleshooting

Here are solutions to common issues you might encounter:

8. Specifications

• Brand: Tribesigns
• Model: B0BW99KM12
• Color: Rustic Brown
• Material: Engineered Wood, Metal
• Product Dimensions: 15.75"D x 15.75"W x 63"H
• Item Weight: 28 pounds
• Number of Shelves: 4
• Bottle Capacity: Up to 18 liquor bottles (diameter < 3.7")
• Glass Holder Capacity: 6-8 wine glasses
• Finish Type: Painted
• Style: Industrial
• Care Instructions: Wipe with Dry Cloth

Figure 8.1: Product dimensions overview.

9. Warranty and Support

For any questions, concerns, or assistance with your Tribesigns Corner Wine Rack, please contact Tribesigns customer support. Please have your model number (B0BW99KM12) and purchase information ready when contacting support.

Contact Information: Refer to your purchase documentation or the Tribesigns official website for the most current customer service contact details.