IKEA BEKANT Underframe for Table Top

Introduction

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your IKEA BEKANT underframe. This underframe is designed to support a table top measuring 120 x 80 cm and features adjustable height functionality, allowing you to customize your workspace for optimal comfort and ergonomics. Please read these instructions carefully before beginning assembly or use.

Safety Information

• Always follow the assembly instructions precisely. Incorrect assembly can lead to instability and potential injury.
• Ensure all screws and fittings are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not overload the table. Refer to the specifications for maximum weight capacity (if available, otherwise use general caution).
• Keep children and pets away from the product during assembly. Small parts can be a choking hazard.
• When adjusting the height, ensure no objects or body parts are in the path of moving components to prevent pinching or crushing.
• Place the table on a level surface to ensure stability.

Package Contents

Before assembly, verify that all components are present. The package for the IKEA BEKANT underframe typically includes:

• Main frame components (legs, crossbars)
• Adjustable leg mechanisms
• Fasteners (screws, bolts, washers)
• Assembly tools (e.g., Allen key), if provided by the manufacturer
• Instruction manual (this document)

If any parts are missing or damaged, please contact IKEA customer support.

Setup (Assembly Instructions)

Assembly of the IKEA BEKANT underframe requires careful attention to detail. It is recommended to have two people for certain steps.

An image showing the assembled IKEA BEKANT underframe, designed for a 120 x 80 cm table top, in black finish.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Assemble Leg Frames: Attach the adjustable leg mechanisms to the main leg components using the provided fasteners. Ensure they are oriented correctly as per the diagrams in the original IKEA manual.
3. Connect Crossbars: Securely attach the crossbars between the leg frames. This forms the main structure of the underframe.
4. Attach Mounting Plates: Fasten the mounting plates to the top of the assembled underframe. These plates will be used to secure your table top.
5. Secure Table Top: Carefully place your 120 x 80 cm table top onto the underframe's mounting plates. Align the table top and secure it using the appropriate screws (often provided with the table top or underframe). Ensure the table top is centered and firmly attached.
6. Final Check: Once assembled, gently lift and move the table to ensure all connections are stable and secure.

Operating Instructions

The IKEA BEKANT underframe features adjustable legs, allowing you to set the table height between 65 cm and 85 cm.

• Height Adjustment: To adjust the height, locate the adjustment mechanism on each leg. This typically involves loosening a knob or screw, sliding the inner leg to the desired height, and then securely tightening the knob or screw.
• Even Adjustment: For optimal stability, ensure all legs are adjusted to the same height. Use a measuring tape to verify the height of each leg from the floor.
• Ergonomic Use: Adjust the table height to suit your posture, whether sitting or standing, to promote ergonomic comfort during work.

Care and Maintenance

Proper care will extend the life and appearance of your BEKANT underframe.

• Cleaning: Wipe the underframe clean with a damp cloth and a mild cleaner. Dry thoroughly with a clean cloth. Avoid abrasive cleaners or harsh chemicals that can damage the powder-coated finish.
• Periodic Checks: Regularly inspect all screws and fittings to ensure they remain tight. Re-tighten as needed to maintain stability.
• Avoid Moisture: Protect the metal parts from excessive moisture to prevent rust.

Troubleshooting

If you encounter issues with your BEKANT underframe, consider the following common solutions:

• Table is Wobbly:
  • Ensure all assembly screws and bolts are fully tightened.
  • Verify that the table is placed on a level surface.
  • Check that all adjustable legs are set to the exact same height.
• Difficulty Adjusting Height:
  • Ensure the locking mechanism (knob/screw) on each leg is fully loosened before attempting to adjust.
  • Check for any obstructions or debris within the adjustable leg mechanism.
• Scratches on Floor:
  • Ensure protective pads (if included) are attached to the bottom of the legs.
  • Consider adding felt pads to prevent floor damage.

If problems persist, refer to the customer support section.

Specifications

Warranty Information

The IKEA BEKANT underframe comes with a 10-year guarantee. This guarantee covers defects in materials and workmanship. Please retain your proof of purchase for any warranty claims. For full terms and conditions, refer to the IKEA guarantee brochure available in-store or on the official IKEA website.

Customer Support

If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact IKEA customer support:

• Visit the official IKEA website for FAQs and contact information.
• Locate your nearest IKEA store for in-person assistance.
• Refer to the contact details provided on your purchase receipt or packaging.