Important Safety Information
Read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- All electrical wiring must be performed by a qualified electrician in accordance with national and local electrical codes.
- Disconnect power at the main circuit breaker before installation or servicing.
- Ensure the installation site can support the fan's weight (approximately 19.14 lbs / 22.2 lbs shipping weight).
- This fan is ETL listed for damp locations, making it suitable for both interior and covered exterior contemporary spaces. Avoid direct exposure to water or direct sunlight.
- Do not operate the fan with damaged blades. Replace all blades if any are damaged.
- Maintain a minimum clearance of 7 feet from the floor to the fan blades.
Image: ETL listed symbol, indicating compliance with safety standards for damp locations.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.
- Fan Motor Assembly
- Fan Blades (3) - Reversible matte black/faux wood finish
- Downrod (6-inch included, other lengths may be available separately)
- Canopy and Mounting Bracket
- Integrated LED Module Light
- Light Diffuser
- Remote Control with Holder and Battery
- Hardware Pack (screws, washers, wire nuts)
- Instruction Manual
For a visual overview of the package contents, please refer to the unboxing video below:
Video: Unboxing of the Inlight 60-inch Integrated LED Indoor and Outdoor Black Ceiling Fan (Model IN-0714).
Setup and Installation
Follow these steps for proper assembly and installation. It is recommended to have a second person for assistance during installation.
- Prepare for Installation: Ensure power is disconnected at the circuit breaker. Clear the work area.
- Mounting Bracket Installation: Secure the mounting bracket to the ceiling junction box. Ensure it is firmly attached and can support the fan's weight.
- Assemble Downrod and Canopy: Thread the motor wires through the downrod. Attach the canopy and splice closure to the downrod. Secure the downrod to the fan motor using the cross pin, clamp pin, and screws.
- Hang the Fan: Carefully lift the fan assembly and hang it onto the mounting bracket. This allows for easier wiring.
- Wiring Connections: Connect the fan's wires to the remote receiver, matching wire colors as indicated in the manual. Then, connect the receiver to the home circuit wiring according to the labels on the wires (e.g., live, neutral, ground). Ensure all connections are secure with wire nuts.
- Secure Canopy: Slide the canopy up to cover the wiring and mounting bracket. Tighten the screws to secure the canopy in place.
- Attach Fan Blades: Secure each of the three fan blades to the motor assembly using the provided screws. The blades are reversible, allowing you to choose between a matte black or faux wood finish.
- Install LED Light Module: Connect the wires for the LED light module. The module is designed to fit securely.
- Attach Light Diffuser: Rotate the light diffuser clockwise to secure it to the fan housing.
For detailed visual instructions on the installation process, please watch the video below:
Video: General installation guide for a 60-inch ceiling fan with lights.
Operating Instructions
Your Inlight ceiling fan is operated using the included remote control. Ensure the battery is correctly installed in the remote.
Remote Control Functions:
- Fan ON/OFF: Press the power button to turn the fan on or off.
- Fan Speed: Use buttons 1, 2, 3 to select desired fan speed. The fan features 3 speeds for optimal air movement.
- Light ON/OFF: Press the light bulb button to turn the integrated LED light on or off.
- Light Dimming: Hold the light bulb button to cycle through dimming levels (10-100% brightness).
- Color Temperature: The integrated LED module provides 3000K color temperature. This model does not feature adjustable color temperature.
- Reverse Function: Press the reverse button (often indicated by a circular arrow) to change the direction of the fan blades.
- Summer Mode (Downward Airflow): Blades rotate counter-clockwise to create a cooling breeze.
- Winter Mode (Upward Airflow): Blades rotate clockwise to circulate warm air trapped near the ceiling.
- Timer Function: Use the timer buttons (e.g., 1H, 4H, 8H) to set the fan to automatically turn off after a specified duration.
Image: Remote control for the Inlight ceiling fan, showing buttons for fan speed, light, and reverse function.
Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Blade Care: Periodically check the fan blades for dust accumulation. Clean them gently to maintain efficient airflow.
- Tightness of Screws: Periodically check all screws for tightness. Due to natural movement of the fan, some connections may become loose over time.
- LED Module: The integrated LED module is designed for long-lasting performance and does not require bulb replacement.
Troubleshooting
If you experience issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control battery low. | Check circuit breaker and wall switch; Verify all wire connections are secure; Replace remote control battery. |
| Fan wobbles | Loose blade screws; Improperly mounted fan; Unbalanced blades. | Tighten all blade screws; Ensure mounting bracket is securely fastened; Use a balancing kit (not included) if necessary. |
| Light does not work | Loose wire connection to LED module; Remote control battery low. | Check LED module wire connections; Replace remote control battery. |
| Remote control not working | Battery low or incorrectly installed; Remote not paired with receiver. | Replace battery, ensure correct polarity; Refer to remote pairing instructions in the full manual. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | IN-0714 |
| Blade Span | 60 inches |
| Blade Pitch | 11 degrees |
| Number of Blades | 3 |
| Motor Type | AC Motor |
| Light Source | Integrated 22-watt Dimmable LED Module |
| Light Output | 1800 lumens |
| Color Temperature | 3000K |
| Control Method | Remote Controlled (3 speeds, reversible motor) |
| Indoor/Outdoor Usage | Indoor, Outdoor (Damp Rated) |
| Fan Height (ceiling to bottom with 6" downrod) | 16.2 inches |
| Weight | 19.14 lbs |
| Voltage | 120 Volts |
| Noise Level | 70 Decibels |
Image: Diagram illustrating the dimensions of the Inlight 60-inch ceiling fan.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Inlight website.
Ensure to have your model number (IN-0714-3-BK) and purchase date available when contacting support.
