1. Introduction
This manual provides detailed instructions for the LGIDTECH FUT035W+ MiBoxer 2-in-1 LED Strip Controller. This versatile controller supports both WiFi and 2.4G communication, allowing for smartphone app control and compatibility with popular voice assistants like Amazon Alexa and Google Home. It is designed to manage both dual white (WW+CW) and single color LED strip lights.
2. Product Features
- Smartphone APP control directly, no extra WiFi controller hub or gateway needed.
- Compatible with Amazon Echo Alexa and Google Home for voice control.
- Works with two types of LED strip lights: WW+CW dual white LED strip light with 3 wires, and single color LED strip light with 2 wires.
- Maximum output of 12A, supporting a maximum load of 144W for DC 12V LED strip lights and 288W for DC 24V LED strips.
- Remote Control Available: Compatible with MiBoxer/Mi-Light remote controllers such as FUT007, B1, B2, K1, K1-B, S1-W. (Remotes sold separately)
3. Package Contents
- 1 x LGIDTECH FUT035W+ LED Strip Controller
- 1 x Remote Control (Note: Remote control may be included or sold separately depending on the specific product package.)
4. Specifications
Figure 4.1: Controller Dimensions (74.5mm x 36mm x 17mm)
| Specification | Value |
|---|---|
| Model Number | FUT035W+ |
| Input Voltage | DC 12~24V |
| Output Current | 12A/Channel |
| Total Output | Max 12A |
| Communication Protocol | WiFi + 2.4GHz |
| 2.4G RF Control Distance | 30 meters (98 ft) |
| Working Temperature | -10~40°C |
| WiFi Standard | IEEE 802.11b/g/n 2.4GHz |
| Bluetooth Protocol | Bluetooth 4.2 (low power consumption) |
| Product Dimensions (L x W x H) | 2.95 x 1.42 x 0.67 inches |
| Item Weight | 1.44 ounces |
5. Setup
5.1 Wiring Connections
Ensure all power is disconnected before making any connections. The controller supports both single color and dual white (WW+CW) LED strips. Connect the LED strip to the output terminals and the power supply to the input terminals as shown in the diagram below.
Figure 5.1: Controller Wiring Diagram
Input: Connect your DC 12V~24V power supply to the V+ and V- terminals.
Output:
- For Single Color LED Strip: Connect the positive (+) wire of the LED strip to the V+ output terminal and the negative (-) wire to the W output terminal.
- For Dual White (WW+CW) LED Strip: Connect the common positive (+) wire of the LED strip to the V+ output terminal. Connect the Warm White (WW) wire to the WW output terminal and the Cold White (CW) wire to the CW output terminal.
The controller also features a GND/PUSH terminal for optional push dimming functionality.
5.2 Initial Power On and Pairing
After wiring, connect the power supply. The controller's indicator light will show its status.
To activate linking mode or change output mode, use the 'SET' button on the controller:
- Press 'SET' button 1 time to activate linking mode.
- Press 'SET' button continuously to change output mode (Red for Single Color, Green for Dual White).
- Long press 'SET' button for 3 seconds to activate WiFi pairing mode while the indicator flashes quickly.
6. Operating Instructions
6.1 Smartphone App Control (Tuya Smart App)
The controller can be directly controlled via a smartphone app, eliminating the need for an additional 2.4GHz gateway. Download the 'Tuya Smart' app from your device's app store.
Figure 6.1: Tuya Smart App Interface
Follow the in-app instructions to add your FUT035W+ controller. Once connected, you can access various functions including:
- Timing setting
- Music rhythm synchronization
- Tap-to-Run & automation
- Do not disturb mode
- Scene customization
- Device sharing
6.2 Voice Control (Amazon Alexa, Google Home)
The controller supports third-party voice control through Amazon Alexa and Google Home. After setting up the controller in the Tuya Smart app, link your Tuya Smart account to your Amazon Alexa or Google Home app.
Figure 6.2: Voice Control Compatibility
You can then use voice commands to control the LED strip, such as turning it on/off, adjusting brightness, and changing color temperature (for dual white strips).
6.3 Remote Control (2.4G Mi-Light / MiBoxer Remotes)
The FUT035W+ controller is compatible with various Mi-Light / MiBoxer 2.4G series remote controllers (sold separately). These remotes offer functions like color temperature adjustment (2700K~6500K), stepless dimming, and frequency switching.
Figure 6.3: Compatible Remote Controllers
Refer to the specific remote control's manual for pairing instructions. Typically, pairing involves putting the controller into linking mode (short press SET button) and then performing a pairing action on the remote.
6.4 Signal Transmitting Function
One LED controller can transmit signals from a remote control to another LED controller within 30 meters. As long as there is an LED controller within 30 meters, the remote control distance can be extended, effectively making the control distance limitless through a mesh network of controllers.
Figure 6.4: Signal Transmitting Principle
7. Maintenance
The LGIDTECH FUT035W+ LED Strip Controller requires minimal maintenance. Follow these guidelines:
- Keep the controller in a dry environment, away from moisture and extreme temperatures.
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the controller to prevent overheating.
- Regularly check all wiring connections to ensure they are secure.
8. Troubleshooting
If you encounter issues with your LGIDTECH FUT035W+ controller, refer to the following common problems and solutions:
- LED Strip Not Lighting Up:
- Check power supply connection and ensure it's providing the correct voltage (DC 12-24V).
- Verify all wiring connections between the power supply, controller, and LED strip are correct and secure.
- Ensure the LED strip itself is functional.
- No App Control:
- Ensure your smartphone is connected to a 2.4GHz WiFi network.
- Verify the controller is in WiFi pairing mode (indicator flashing quickly) during setup.
- Check your router settings to ensure no firewalls or restrictions are blocking the connection.
- Restart the controller by disconnecting and reconnecting power.
- Remote Control Not Working:
- Ensure the remote control has fresh batteries.
- Verify the remote is properly paired with the controller. Refer to the remote's manual for pairing instructions.
- Check for obstructions between the remote and the controller.
- Incorrect Color/Brightness:
- For dual white strips, ensure the controller's output mode is set correctly (Green indicator for Dual White).
- Recalibrate or reset the controller if color or brightness issues persist.
If problems persist after attempting these solutions, please contact LGIDTECH customer support.
9. Warranty and Support
For warranty information and technical support, please refer to the product packaging or contact LGIDTECH customer service directly through their official website or the retailer from whom the product was purchased. Please have your model number (FUT035W+) and purchase details ready when contacting support.