1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Brandmotion Wireless Observation IR Camera System with a 7-inch HD Monitor (Model AHDS-7810V2). This system is designed to enhance visibility and security for various vehicles, including RAM 1500 (09-2018) and Heavy Duty (2010-Current) trucks, as well as RVs and trailers. It features a wireless camera, a 7-inch HD monitor with DVR capabilities, and infrared night vision for clear viewing day or night.
2. Package Contents
Please verify that all items listed below are included in your package:
- 7-inch HD DVR Monitor
- Wireless HD Observation Camera
- Monitor Suction Cup Mount
- Monitor Dashboard Mount
- Camera Mounting Bracket
- DC Power Cable for Monitor (Cigarette Lighter Adapter)
- DC Power Cable for Camera
- Antennas (for Monitor and Camera)
- Installation Hardware (screws, etc.)
Figure 2.1: All components included in the Brandmotion AHDS-7810V2 Wireless HD Observation System, including the 7-inch monitor, wireless camera, various mounting brackets, power cables, and antennas.
3. Setup and Installation
3.1 Monitor Installation
- Choose a suitable location for the 7-inch HD monitor on your vehicle's windshield or dashboard that does not obstruct your view or interfere with airbags.
- Attach the suction cup mount or dashboard mount to the monitor.
- Secure the monitor to the chosen surface. Ensure the mount is firmly attached.
- Connect the DC power cable to the monitor and plug the other end into your vehicle's 12V accessory outlet (cigarette lighter).
- Attach the antenna to the designated port on the monitor.
3.2 Camera Installation
- Select a mounting location for the wireless camera that provides the desired field of view, typically at the rear of the vehicle or trailer. Ensure the location allows for a clear line of sight for wireless transmission if possible.
- Use the provided camera mounting bracket and hardware to securely attach the camera. You may need to drill pilot holes.
- Adjust the camera's swivel head to achieve the optimal viewing angle.
- Connect the DC power cable to the camera. This cable typically connects to a 12V power source on your vehicle (e.g., reverse lights for a backup camera function, or constant power for continuous observation).
- Attach the antenna to the designated port on the camera.
Figure 3.1: The wireless camera positioned next to the 7-inch HD monitor, illustrating the compact design of the observation system.
3.3 Initial Pairing (if necessary)
The camera and monitor are typically pre-paired from the factory. If they do not connect automatically, refer to the 'MENU' options on the monitor to initiate a pairing process. Ensure both devices are powered on and within range (up to 80 feet for a reliable connection).
4. Operating Instructions
4.1 Powering On/Off
Once connected to power, the monitor should power on automatically or by pressing the power button. To power off, press and hold the power button.
4.2 Monitor Controls
The monitor features several buttons for navigation and control:
- CAM: Switches between connected cameras (supports up to 4 cameras).
- MENU: Accesses system settings, including pairing, display options, and recording settings.
- - / +: Navigates menu options or adjusts settings (e.g., brightness, volume).
- ENTER: Confirms selections in the menu.
- CARD: Accesses recorded footage or initiates recording.
4.3 Viewing Modes
The monitor can display video from a single camera or multiple cameras simultaneously in a split-screen view. Use the 'CAM' button to cycle through available camera views.
Figure 4.1: The 7-inch HD monitor shows a split-screen view from multiple cameras, illustrating the system's capability to display various angles simultaneously.
4.4 Recording Functionality
The monitor includes DVR functionality, allowing you to record video footage. Insert a microSD card (up to 128GB, not included) into the designated slot. Refer to the 'MENU' for recording settings such as continuous recording, loop recording, and motion detection.
Figure 4.2: The system supports continuous recording to enhance security, capturing footage from multiple cameras.
4.5 Infrared Night Vision
The camera is equipped with infrared (IR) LEDs to provide clear visibility in low-light conditions or complete darkness.
5. Maintenance
5.1 Cleaning
To clean the monitor screen and camera lens, use a soft, lint-free cloth. For stubborn dirt, dampen the cloth with water or a mild, non-abrasive cleaning solution. Avoid harsh chemicals that could damage the surfaces.
5.2 Weather Protection
The wireless camera features an IP65 international protection rating, indicating it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for outdoor use in various weather conditions.
Figure 5.1: The wireless camera features a waterproof casing, providing protection against environmental elements for enhanced durability.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor | Power issue, camera/monitor not paired, out of range, antenna not connected. | Check power connections. Ensure both camera and monitor are powered on. Re-pair devices via monitor menu. Ensure devices are within 80ft range and antennas are securely attached. |
| Image flickering or poor quality | Weak wireless signal, interference, low battery (if applicable). | Reduce distance between camera and monitor. Check for sources of interference (e.g., other wireless devices). Ensure stable power supply. |
| Recording not working | No microSD card, card full, card not formatted, recording settings incorrect. | Insert a compatible microSD card (up to 128GB). Format the card via monitor menu. Check recording settings. |
| Monitor mount not secure | Surface not clean, suction cup not properly engaged. | Clean the mounting surface thoroughly. Ensure the suction cup lever is fully engaged. Consider using the dashboard mount for a more permanent solution. |
| Installation screws too long/holes too small | Incompatibility with specific vehicle mounting points. | Use appropriate drill bits to enlarge holes if necessary, or acquire shorter screws suitable for your specific application. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | AHDS-7810V2 |
| Screen Size | 7 Inches |
| Video Capture Resolution | 1080p |
| Frame Rate | 30 frames per second |
| Connectivity Technology | Wi-Fi (Wireless) |
| Wireless Communication Range | Up to 80 feet (reliable connection) |
| Number of Channels | 4 (supports up to 4 cameras) |
| Power Source | DC (4 Volts, 3 Watts) |
| Camera Light Source Type | Infrared |
| Camera International Protection Rating | IP65 (Dust tight, protected against water jets) |
| Storage Support | MicroSD card up to 128GB (for DVR) |
| Material | Plastic |
| Product Dimensions (L x W x H) | 3.5 x 8.5 x 12 inches |
| Item Weight | 3.07 pounds |
8. Warranty and Support
8.1 Warranty Information
The Brandmotion Wireless Observation IR Camera System (AHDS-7810V2) comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Brandmotion's US-based support team. Detailed contact information can be found on the official Brandmotion website or through your retailer.
Visit www.brandmotion.com for more information and support resources.
