MICRO-AIR EasyTouch Digital RV Thermostat User Manual (Model 347 Black)

1. Introduction

The MICRO-AIR EasyTouch Digital RV Thermostat (Model 347 Black) is designed to provide advanced climate control for your recreational vehicle. This programmable thermostat features a large color touch screen, WiFi and Bluetooth connectivity for remote control via a smartphone app, and automatic detection of system sources such as furnaces, heat strips, and cooling units. It is specifically engineered as a replacement for compatible GE RV thermostats.

Image 1.1: The MICRO-AIR EasyTouch Digital RV Thermostat (Model 347 Black) shown alongside a compatible GE thermostat it replaces.

2. Setup and Installation

Before beginning installation, ensure the power to your RV's HVAC system is turned off at the breaker. This thermostat is designed for a simple replacement process.

2.1. Choosing the Right Model

It is crucial to select the correct EasyTouch RV thermostat model for your existing RV A/C thermostat. Refer to the model guide below to ensure compatibility. The MICRO-AIR 347 Black model is specifically designed to replace GE thermostats with OEM model numbers: RARWT, RARMC, RAREC3A, RAREC2A, RAREC1A.

Image 2.1: Compatibility chart for MICRO-AIR EasyTouch RV Thermostats, illustrating various OEM thermostats and their corresponding EasyTouch replacement models.

For further assistance in selecting the correct model, please consult the official product resources or contact support.

2.2. Installation Steps

Image 2.2: Detailed diagram illustrating the removal of the old thermostat, wiring, and mounting of the new MICRO-AIR EasyTouch Thermostat.

1. Removing the Old Thermostat: Depress the rectangular locking tab on the bottom of the thermostat with a small screwdriver. Pull the thermostat away from the wall from the bottom. Unplug the connector by depressing the locking tab. Remove the back plate mounting screws and remove the back plate.
2. Wiring the Thermostat: All models feature a simple telephone-style modular jack. This is a six-pin version of a common Ethernet connector with a press tab for removing the connector. Press the tab to remove the connector from the old thermostat and insert it into the new thermostat.
3. Mounting the Micro-Air EasyTouch Thermostat:
   1. Locate the mounting buttons horizontally across the hole with the smaller diameter against the wall.
   2. Screw in one screw and level the buttons so the display will be straight when installed.
   3. Screw in second screw making sure the two buttons remain level.
   4. Remove mounting tab before mounting on the wall.
   5. Align and press the display against the wall and gently slide the display down to lock it in place.

3. Operating Instructions

The EasyTouch thermostat offers intuitive control through its large color touch screen and a dedicated smartphone application.

3.1. Touch Screen Operation

The thermostat features a convenient 4" x 3.05" color touch screen for direct temperature adjustments and mode selection. The screen provides an intuitive interface for effortless control, even in low-light conditions.

Image 3.1: A user interacting with the large color touch screen of the EasyTouch thermostat, highlighting its ease of use.

3.2. Wireless App Access (WiFi & Bluetooth)

Control your RV's climate remotely from anywhere using the MICRO-AIR smartphone app, available via WiFi and Bluetooth. The app allows you to monitor and adjust the air conditioner, furnace, and heat pump settings. Free feature updates are provided through WiFi, with no monthly service fees.

Image 3.2: The smartphone app for the EasyTouch thermostat, demonstrating remote control capabilities from a mobile device.

3.3. Programmable Features

The EasyTouch RV thermostat is programmable, allowing you to set schedules for optimal comfort and energy efficiency. It automatically detects system sources such as furnaces, heat strips, and cooling units, adapting its operation accordingly.

4. Maintenance

The MICRO-AIR EasyTouch thermostat is designed for reliable operation with minimal maintenance. To ensure optimal performance:

• Cleaning: Gently wipe the touch screen and exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Software Updates: Ensure your thermostat's firmware is up-to-date by checking for free feature updates through the smartphone app via WiFi.
• Battery Check: While the thermostat is primarily powered by the RV's system, ensure any backup batteries (if applicable to your specific RV wiring) are in good condition.

5. Troubleshooting

If you encounter issues with your EasyTouch thermostat, consider the following common solutions:

• No Power/Display Off: Verify that the RV's HVAC system power is on at the breaker. Check all wiring connections to ensure they are secure.
• Incorrect Temperature Readings: Ensure the thermostat is not exposed to direct sunlight or drafts, which can affect sensor accuracy.
• App Connectivity Issues: Confirm your RV has a stable WiFi connection. Ensure Bluetooth is enabled on your smartphone and the thermostat. Try restarting both the app and the thermostat.
• System Not Responding: Check the mode settings (Cool, Heat, Fan) on both the thermostat and the app. Verify that the correct system source (furnace, A/C) is detected.

For persistent issues, please contact MICRO-AIR customer support.

6. Specifications

7. Warranty and Support

HUTCH MOUNTAIN PROMISE: Reliability is our promise. Our Micro-Air EasyTouch Digital thermostat for RV is designed to offer you seamless control of your RV’s climate whenever you need it most. We are dedicated to our customers – feel free to give us a shout if you have any questions!

For support, please refer to the official MICRO-AIR website or contact Hutch Mountain directly. Contact information can typically be found on the product packaging or the manufacturer's website.