LILYGO T-SIM7080G-S3

Download PDF
Contents

LILYGO ESP32-S3 T-SIM7080G-S3 Development Board User Manual

Model: T-SIM7080G-S3 | Brand: LILYGO

1. Introduction

This manual provides detailed instructions for the LILYGO ESP32-S3 T-SIM7080G-S3 Development Board. This board integrates an ESP32-S3 microcontroller with a SIM7080G module, offering Cat-M, NB-IoT, and GPS capabilities. It is designed for developers working on IoT projects requiring cellular connectivity and location services.

2. Product Features

  • MCU: ESP32-S3
  • Cellular Module: SIM7080G (supports Cat-M & NB-IoT)
  • Flash Memory: 16MB
  • PSRAM: 8MB
  • Clock Speed: 240Mhz
  • Peripheral Interfaces: I2C, SPI, UART, SDIO, I2S, CAN
  • Wireless Connectivity: Wi-Fi (IEEE 802.11 b/g/n-compliant), Bluetooth LE (Bluetooth 5, Bluetooth mesh)
  • Integrated GPS: For location tracking

3. Package Contents

Verify that all items are present in your package:

LILYGO T-SIM7080G-S3 Development Board and accessories

Image: The LILYGO T-SIM7080G-S3 development board shown with its accompanying accessories, including an LTE antenna, GPS antenna, power cable, and two pin headers.

  • 1 x LILYGO T-SIM7080G-S3 Development Board
  • 1 x LTE Antenna
  • 1 x GPS Antenna
  • 1 x Power Cable
  • 2 x Pin Headers

4. Board Overview

The LILYGO T-SIM7080G-S3 board features various components and interfaces. Familiarize yourself with the layout for proper usage.

Top view of LILYGO T-SIM7080G-S3 Development Board

Image: A detailed top-down view of the LILYGO T-SIM7080G-S3 development board, highlighting the ESP32-S3 module, SIM7080G module, various connectors, and pin labels.

Bottom view of LILYGO T-SIM7080G-S3 Development Board with battery holder

Image: The underside of the LILYGO T-SIM7080G-S3 development board, showing the integrated 18650 battery holder and additional pin labels.

4.1 Pinout Diagram

Refer to the pinout diagram for detailed information on each pin's function.

LILYGO T-SIM7080G-S3 Pinout Diagram

Image: A comprehensive pinout diagram for the LILYGO T-SIM7080G-S3 board, illustrating the GPIO assignments, power connections, and module-specific pins for the ESP32-S3 and SIM7080G.

5. Setup Instructions

5.1 Hardware Connections

  1. Insert SIM Card: Carefully insert a Nano SIM card into the designated SIM card slot on the board. Ensure correct orientation.
  2. Insert TF Card (Optional): If using, insert a TF (MicroSD) card into the TF card slot.
  3. Connect Antennas: Connect the LTE antenna to the main cellular antenna connector and the GPS antenna to the GPS connector. Ensure a secure connection.
  4. Power Supply: The board can be powered via the USB-C port or by inserting an 18650 battery into the battery holder on the back. The solar input range is 4.4V-6V.
  5. USB Connection: Connect the board to your computer using a USB-C cable for programming and serial communication.

5.2 Software Setup

  1. Install Drivers: Ensure necessary USB-to-serial drivers are installed for your operating system (Windows, Linux, macOS).
  2. Development Environment: Set up your preferred ESP32-S3 development environment (e.g., Arduino IDE with ESP32 board support, ESP-IDF).
  3. Libraries: Install relevant libraries for the SIM7080G module and GPS functionality.
  4. Firmware: Download example code and firmware from the official LILYGO GitHub repository: github.com/Xinyuan-LilyGO/LilyGo-T-SIM7080G.

6. Operating Instructions

6.1 Powering On/Off

Use the integrated ON/OFF switch to control the board's power. When connected via USB, the board may draw power even if the switch is off, depending on the specific circuit design.

6.2 Programming the ESP32-S3

Connect the board to your computer via USB-C. Use your chosen development environment to upload your code. The board typically enters programming mode automatically, or you may need to press the BOOT button while resetting, depending on your setup and firmware.

6.3 Using Cellular (Cat-M/NB-IoT)

The SIM7080G module requires AT commands for communication. Refer to the SIM7080G documentation and LILYGO's examples for sending commands to initialize the module, connect to the network, and send/receive data. Ensure your SIM card is activated for Cat-M or NB-IoT services.

6.4 Using GPS

The integrated GPS functionality of the SIM7080G module can be accessed via AT commands. Ensure the GPS antenna is connected and has a clear view of the sky for optimal signal reception. Parse NMEA sentences from the module to extract location data.

7. Specifications

Detailed technical specifications for the LILYGO T-SIM7080G-S3 Development Board:

LILYGO T-SIM7080G-S3 Specifications Table

Image: A table summarizing the key specifications of the LILYGO T-SIM7080G-S3, including MCU, cellular module, memory, clock speed, wireless connectivity, peripheral interfaces, and SIM7080G details.

FeatureDetail
MCUESP32-S3
CAT-M & NB-IoT ModuleSIM7080G
Flash Memory16MB
PSRAM8MB
Clock Speed240Mhz
Wireless ConnectivityWi-Fi: IEEE 802.11 b/g/n-compliant; Bluetooth LE: Bluetooth 5, Bluetooth mesh
Peripheral InterfacesI2C, SPI, UART, SDIO, I2S, CAN
Operating System SupportLinux (for development), Android (RIL support)
USB Driver SupportMicrosoft Windows 7/8/10, Linux, Android
Supply Voltage3.4V ~ 4.2V (via battery), 5V (via USB)
SIM Card Support1.8V/3.0V
Product Dimensions (LxWxH)4.33 x 1.26 x 0.79 inches (111 x 32 x 20 mm)

8. Troubleshooting

  • Board Not Recognized by Computer:
    Ensure you have installed the correct USB-to-serial drivers for the ESP32-S3. Try a different USB-C cable, as some cables are charge-only. Verify the cable is securely connected.
  • Failed to Upload Code:
    Check that the correct board and COM port are selected in your IDE. Ensure the board is in programming mode (sometimes requires holding the BOOT button while pressing RST). Verify power supply.
  • No Cellular Network Connection:
    Confirm your SIM card is active and has a data plan for Cat-M or NB-IoT. Ensure the LTE antenna is properly connected. Check network coverage in your area. Verify AT commands for network registration are correct.
  • GPS Not Acquiring Fix:
    Ensure the GPS antenna is connected and has an unobstructed view of the sky. GPS acquisition can take several minutes, especially on first use or after a long period of inactivity.
  • Power Issues:
    If using battery, ensure it is charged and correctly inserted. If using USB, ensure the power source provides sufficient current.

9. Maintenance

  • Storage: Store the development board in a dry, anti-static environment when not in use.
  • Cleaning: Use a soft, dry brush or compressed air to remove dust. Avoid liquids.
  • Handling: Handle the board by its edges to avoid touching sensitive components, especially when powered.
  • Firmware Updates: Regularly check the official LILYGO GitHub repository for firmware updates and examples to ensure optimal performance and access to new features.

10. Support and Resources

For further assistance, technical documentation, and community support, please refer to the following resources:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.