P&G Purifier of Water Portable Water Purifier Packets

Product Overview

The P&G Purifier of Water packets offer a highly effective and portable solution for water purification. Registered as a disinfectant by the EPA, these packets are designed to remove 99.9999% of bacteria and 99.99% of viruses, ensuring safe drinking water in various situations.

P&G Purifier of Water packets, designed for portable water purification.

Each packet treats 10 liters of water, offering a lightweight and compact solution for clean water on the go, ideal for camping, hiking, and emergencies.

Key Features:

• Effective Purification: Removes 99.9999% of bacteria and 99.99% of viruses.
• Portable and Lightweight: Small packets are easy to carry for outdoor activities or emergency kits.
• Quick Action: Purifies water in just 30 minutes.
• Treats Large Volume: One packet treats 2.5 gallons (10 liters) of water.
• EPA Registered: Certified for its effectiveness as a disinfectant.

Setup and Operating Instructions

Follow these steps carefully to purify water using P&G Purifier of Water packets:

1. Collect Water: Obtain water from any available source, such as a river, lake, or puddle. Ensure the water is collected in a clean container.
2. Pour in Packet: Open one P&G Purifier of Water packet and pour its entire contents into the collected water. One packet treats 2.5 gallons (10 liters) of water.
3. Stir: Stir the water vigorously for 5 minutes to ensure the powder is fully mixed and the flocculation process begins.
4. Wait for Settling: Allow the water to sit undisturbed for 20 minutes. During this time, the impurities will bind together and settle to the bottom of the container, forming a floc.
5. Filter: Carefully pour the clean water from the top through a clean cotton cloth or a fine mesh filter into a separate, clean container. Be careful not to disturb the settled floc at the bottom.
6. Enjoy or Store: The purified water is now safe for drinking. It can be consumed immediately or stored in a clean, covered container.

Visual guide to the 5-step water purification process, from collecting dirty water to enjoying clean water.

The flocculation process effectively separates dirt and contaminants, leaving clear, purified water.

Important Notes:

• Always use a clean container for purification and storage.
• Do not consume the settled floc.
• The purified water may have a faint chlorine smell, which is normal and indicates disinfection.

Maintenance

P&G Purifier of Water packets are single-use and require no maintenance. Store unused packets in a cool, dry place, away from direct sunlight and moisture. Check the expiration date on the packaging before use.

Troubleshooting

Specifications

• Model Number: P&GPWP4
• Package Dimensions: 3.9 x 3.15 x 0.43 inches
• Item Weight: 0.71 ounces (per 4-packet pack)
• Treatment Capacity: 10 liters (2.5 gallons) per packet
• Effectiveness: Removes 99.9999% of bacteria and 99.99% of viruses.
• Manufacturer: P&G
• ASIN: B099Y1W8DV

Official Product Video

Warranty and Support

P&G Purifier of Water packets are designed for reliability and effectiveness. For specific warranty information or support inquiries, please refer to the manufacturer's official website or contact their customer service directly. General return policies may apply as per the retailer's terms.

Manufacturer: P&G

Seller: Business Connect World

For further assistance, please visit the P&G Purifier of Water brand page on Amazon.