Reliable 5100IS/2100IR Professional Iron Station User Manual

Introduction

Thank you for choosing the Reliable 5100IS/2100IR Professional Iron Station. This advanced ironing system is designed to provide superior steam performance for efficient and effortless garment care. Featuring a durable stainless steel boiler, an aluminum soleplate iron, and an innovative Eco Mode, this station is built for both professional results and energy efficiency. Please read this manual thoroughly before operation to ensure safe and optimal use of your iron station.

Image: The Reliable 5100IS/2100IR Professional Iron Station, showcasing the main unit with its pressure gauge and controls, connected to the professional steam iron with a cork handle, resting on its silicone pad.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

• Read all instructions before using the iron station.
• Use the appliance only for its intended use as described in this manual.
• To protect against a risk of electric shock, do not immerse the iron station or iron in water or other liquids.
• Always turn the iron station OFF before plugging or unplugging from the electrical outlet. Never pull on the cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
• Do not allow the cord to touch hot surfaces. Let the iron station cool completely before putting away. Loop cord loosely around the appliance when storing.
• This iron station is equipped with 4 Built-in Safety Systems for your protection, including a safety cap that prevents opening under pressure.
• Do not operate the iron station with a damaged cord or if the appliance has been dropped or damaged.
• Close supervision is necessary for any appliance being used by or near children. Do not leave the iron station unattended while connected or on an ironing board.
• Burns can occur from touching hot metal parts, hot water, or steam. Use caution when turning the iron station upside down – there may be hot water in the reservoir.
• Use only distilled water in the boiler to prevent mineral buildup and ensure longevity.

Image: Close-up of the safety cap on the Reliable Iron Station, which prevents opening while the boiler is under pressure, enhancing user safety.

Components and Parts Identification

Familiarize yourself with the various parts of your Reliable 5100IS/2100IR Professional Iron Station.

Image: A detailed diagram illustrating the key components of the Reliable 5100IS/2100IR Iron Station, including the safety cap, carrying handle, steam power button, 2100IR Steam Iron, Eco mode button, quick release connector, variable steam dial, low water indicator light, pressure gauge, and stainless steel tank & enclosure.

Included Components:

• Reliable 5100IS Boiler Unit
• Reliable 2100IR Professional Steam Iron
• Silicone Iron Rest Pad
• Water Level Measuring Stick
• Water Funnel
• Steam Hose with Quick Connect System

Image: Close-up of the external solenoid valve on the Reliable Iron Station, which allows for precise control over steam output.

Image: The Reliable 2100IR Professional Steam Iron with its cork handle, resting on the included silicone iron rest pad.

Setup

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Placement: Place the iron station on a stable, heat-resistant surface, preferably near an electrical outlet and an ironing board.
3. Water Filling:
   • Ensure the unit is unplugged and cool.
   • Unscrew the safety cap counter-clockwise.
   • Using the provided funnel and measuring stick, fill the 2.2L stainless steel boiler with distilled water only. Do not overfill.
   • Securely replace the safety cap by turning it clockwise until tight.
4. Connecting the Iron:
   • Connect the steam hose from the iron to the quick connect system on the boiler unit. Ensure it clicks securely into place.
   • Connect the ILME plug from the iron to the corresponding port on the boiler unit.
   

   Image: The steam iron connected to the main boiler unit, showing the steam hose and electrical connection points.

5. Power Connection: Plug the iron station's power cord into a grounded 120V electrical outlet.

Operating Instructions

Powering On and Heating:

1. Turn the boiler switch to the "On" position. The power indicator light will illuminate.
2. Allow the unit to heat up. This typically takes 15-20 minutes. The pressure gauge will rise, indicating steam pressure building up to 3.5 Bar / 50 PSI. The "Steam Ready" indicator light will illuminate when optimal pressure is reached.
3. Adjust the iron's temperature dial according to the fabric type you are ironing.

Image: The side view of the Reliable Iron Station, highlighting the boiler power switch with On, Off, and Eco mode settings.

Using Steam:

• Once the unit is ready, press the steam button on the iron handle to release steam.
• The 2100IR iron features a 32-chamber soleplate design for super dry steam, preventing condensation.
• Adjust the steam output using the external solenoid valve for complete steam control.

Eco Mode:

• To activate Eco Mode, switch the boiler switch to the "Eco" position.
• This mode maintains a steady performance level of 2 bars (29 PSI), conserving energy by up to 33%.
• Note: In Eco Mode, the unit will not produce steam. It is intended to maintain a steady readiness and quickly return to full performance when switched back to "On". Do not use this mode for dry ironing.

Maintenance

Draining the Boiler:

Regularly draining the boiler helps prevent mineral buildup and ensures optimal performance.

1. Turn the boiler off and unplug the unit.
2. Allow the unit to cool completely. Never attempt to drain a hot or pressurized boiler.
3. Once cool, carefully remove the pressure safety cap.
4. Tip the unit upside down over a sink or bucket to drain all water from the boiler.
5. Replace the safety cap securely.

Cleaning the Soleplate:

The aluminum soleplate is designed to be easy to clean. For minor residue, wipe with a damp cloth when the iron is cool. For stubborn marks, use a specialized iron soleplate cleaner according to its instructions.

Troubleshooting

Specifications

Image: A diagram showing the dimensions of the Reliable 5100IS Iron Station: 10 inches (width), 8 inches (depth), and 12.25 inches (height).

Warranty and Support

Reliable Corporation stands behind the quality of its products. The 5100IS/2100IR Professional Iron Station is designed for durability and performance.

• EU Spare Part Availability: Spare parts are available for 5 years.
• For specific warranty details, service, or technical support, please refer to the official Reliable Corporation website or contact their customer service directly.
• Always ensure you have your product model number (5100IS/2100IR) and purchase date available when contacting support.

For additional resources, you may visit the Reliable Store on Amazon.