Phenyx Pro Dual Digital Wireless Microphone System PDP-2-2H User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Phenyx Pro Dual Digital Wireless Microphone System PDP-2-2H. This system is designed for various applications including karaoke, church events, DJ performances, and singing, offering stable performance and clear sound.

The system features 48kHz/24Bit UHF digital circuitry for encrypted signal transmission, minimizing crosstalk and delivering accurate audio. It operates within the 902-928MHz frequency range with 15 tunable frequency groups to avoid interference. The handheld microphones are dynamic with a cardioid polar pattern, suitable for live performance.

Package Contents

Verify that all items listed below are included in your package:

• 2 x Portable Wireless Microphones
• 1 x Receiver with 6.35mm Plug
• 2 x Handheld Foam Covers
• 1 x Universal USB-C Charging Cable
• 1 x 6.35mm to 3.5mm Adapter
• 1 x Angle TS Male to 1/4” TS Female Adapter (for receiver antenna)
• 4 x AA Batteries
• 1 x User’s Manual

Image: All components included in the Phenyx Pro PDP-2-2H system package.

Product Overview

Receiver

Image: Diagram illustrating the receiver components including antenna, USB-C charging port, battery indicator, RF indicator, and power/pair button.

• Antenna: For signal reception.
• USB-C Charging Port: For recharging the internal 1500mAh battery.
• Battery Indicator: Displays receiver battery level.
• RF Indicator: Shows radio frequency signal status.
• Power/Pair Button: Turns the receiver on/off and initiates pairing.
• 1/4" TS Connector: Output for connecting to audio devices.

Handheld Microphones

Image: Diagram illustrating the handheld microphone components including microphone capsule, real-time battery indicator, ON/MUTE/OFF button, frequency selection button, and battery compartment.

• Microphone Capsule: Captures audio.
• Real-time Battery Indicator: Displays microphone battery level.
• ON/MUTE/OFF Button: Controls power and mute function.
• Frequency Selection Button: Changes the operating frequency.
• Battery Compartment: Holds two AA batteries.

Setup Instructions

1. Install Batteries in Microphones

Unscrew the bottom part of each handheld microphone to access the battery compartment. Insert two AA batteries into each microphone, ensuring correct polarity. The microphones are not rechargeable and require AA batteries for power.

2. Charge the Receiver

Connect the universal USB-C charging cable to the receiver's USB-C port and a suitable USB power source. The receiver has a 1500mAh rechargeable battery, providing approximately 5.5 hours of working time after a 3-hour fast charge.

Image: The receiver being charged via its USB Type-C port, highlighting its 1500mAh battery capacity, 5.5 hours of battery life, and 3 hours fast charging time.

3. Connect the Receiver to an Audio Device

The receiver features a 1/4" TS connector. Plug the receiver directly into a compatible audio input on your karaoke machine, partybox, powered speaker, amplifier, mixer, or audio interface. If needed, use the included 6.35mm to 3.5mm adapter for devices with a 3.5mm input.

Image: Step-by-step guide showing how to turn on the receiver, turn on the microphone, and plug the receiver into a partybox for sound output.

For optimal signal reception, use the included angle TS male to 1/4" TS female adapter to keep the receiver antenna pointed upward.

Image: Illustration emphasizing the importance of firmly inserting the receiver into the audio input.

Operating Instructions

1. Power On/Off

• Receiver: Press and hold the Power/Pair button on the receiver to turn it on or off.
• Microphones: Press and hold the ON/MUTE/OFF button on each microphone to turn it on or off.

2. Mute Function

While the microphone is on, a short press of the ON/MUTE/OFF button will mute or unmute the microphone. The display will indicate the mute status.

3. Frequency Selection

The system offers 15 tunable UHF frequency groups. To change the frequency on a microphone, short press the frequency selection button. The receiver will automatically sync with the new frequency. This is useful for avoiding interference in crowded spectrum conditions.

Image: Illustration of the microphone's power/mute button and frequency selection button for easy control.

4. Operating Range

The system provides a line-of-sight range of 160-200 feet. For optimal performance, ensure the receiver's antenna is upward and avoid obstructions like metal or glass between the microphones and the receiver.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the microphones and receiver. Avoid using liquid cleaners or solvents.
• Battery Replacement: Replace AA batteries in the microphones when the battery indicator shows low power.
• Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

Troubleshooting

• No Sound:
  • Ensure both microphones and receiver are powered on.
  • Check battery levels for both microphones and receiver.
  • Verify the receiver is firmly connected to the audio input of your sound system.
  • Confirm the audio device's volume is turned up and not muted.
• Interference/Signal Drops:
  • Change the microphone frequency using the frequency selection button.
  • Ensure the receiver antenna is positioned vertically and unobstructed.
  • Reduce the distance between the microphones and the receiver.
  • Avoid placing the receiver near metal objects or other electronic devices that may cause interference.
• Poor Sound Quality:
  • Ensure microphones are not muted.
  • Check for proper microphone technique (e.g., speaking directly into the microphone).
  • Verify the audio device's input levels are correctly set.

Important Usage Notes:

• Do not hold the microphone by the antenna area as this can block the signal.


Image: An 'X' over a hand holding the microphone near the antenna, indicating improper handling.

• Avoid placing the receiver behind metal or glass objects, which can obstruct the wireless signal.


Image: An 'X' over a metal grid between a microphone and receiver, illustrating signal obstruction.

• This system uses UHF wireless technology and is not compatible with Bluetooth devices.


Image: A Bluetooth symbol with an 'X' through it, indicating no Bluetooth compatibility.

Specifications

Warranty and Support

Phenyx Pro products are manufactured with quality components and precision engineering to ensure reliability. We stand behind every product we make.

For technical support, warranty claims, or further assistance, please refer to the contact information provided in your product packaging or visit the official Phenyx Pro website.