Introduction
This manual provides comprehensive instructions for the safe and efficient use of your Silonn Ice Maker and Brita Water Filter Dispenser Bundle. Please read all instructions carefully before operating the appliances and retain this manual for future reference.
Image: The Silonn Ice Maker and Brita Water Filter Dispenser, shown together as a bundle.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Ensure the power supply matches the voltage requirements of the appliance.
- Do not immerse the ice maker in water or other liquids.
- Keep hands and foreign objects out of the ice maker during operation.
- Place the ice maker on a stable, level surface away from direct sunlight and heat sources.
- Only use potable water in both the ice maker and water dispenser.
- Keep the Brita dispenser away from extreme temperatures.
Setup
Silonn Ice Maker Setup
- Unpacking: Carefully remove the ice maker from its packaging. Inspect for any damage.
- Placement: Position the ice maker on a flat, stable countertop. Ensure adequate ventilation around the unit.
- Initial Cleaning: Before first use, it is recommended to run the self-cleaning cycle. Refer to the 'Maintenance' section for detailed instructions.
- Water Filling: Open the water reservoir lid and fill with potable water up to the maximum fill line. Do not overfill.
- Power Connection: Plug the power cord into a grounded electrical outlet.
Image: The Silonn countertop ice maker, ready for setup.
Brita Water Filter Dispenser Setup
- Washing: Wash the dispenser, lid, and reservoir by hand with mild soap and rinse thoroughly. Do not wash the filter.
- Filter Preparation: The Brita Standard Filter does not require pre-soaking.
- Filter Insertion: Insert the filter firmly into the reservoir until it clicks into place.
- Filling: Fill the reservoir with cold tap water. The water will filter through to the main body of the dispenser.
Image: The Brita XL Water Filter Dispenser with a filter, ready for assembly.
Operating Instructions
Silonn Ice Maker Operation
- Power On: Press the 'ON/OFF' button on the control panel.
- Select Ice Size: Use the 'SELECT' button to choose between small or large bullet-shaped ice cubes. The indicator light will show your selection.
- Ice Production: The ice maker will begin producing ice. The first batch of 9 cubes is typically ready in approximately 6 minutes.
- Ice Collection: Ice will drop into the ice basket. When the basket is full, the 'ICE FULL' indicator will illuminate, and the machine will pause production.
- Water Refill: If the water level is low, the 'ADD WATER' indicator will light up. Refill the reservoir to continue ice production.
- Power Off: Press the 'ON/OFF' button to turn off the ice maker.
Image: Close-up view of the Silonn ice maker's internal components showing ice being formed, with text indicating 6 minutes for 9 pieces of ice.
Brita Water Filter Dispenser Operation
- Dispensing Water: Use the easy-pour spigot located at the bottom of the dispenser to get filtered water.
- Refilling: When the water level is low, simply lift the lid and pour cold tap water into the reservoir.
- Filter Indicator: The dispenser features a filter indicator to remind you when it's time to change the Brita water filter.
Image: Diagram illustrating the Brita dispenser's 27-cup capacity, with 9 cups in the reservoir and 18 cups in the body.
Maintenance
Silonn Ice Maker Maintenance
- Self-Cleaning Function: To activate, ensure the water reservoir is filled. Press and hold the 'CLEAN' button (if available, or refer to specific model instructions for self-cleaning). The machine will run a cleaning cycle.
- Draining Water: Regularly drain any remaining water from the reservoir using the drain plug located at the bottom of the unit.
- Exterior Cleaning: Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners.
- Ice Basket and Scoop: Wash the ice basket and scoop with mild soap and water, then rinse and dry thoroughly.
Brita Water Filter Dispenser Maintenance
- Cleaning: Hand wash the dispenser, lid, and reservoir regularly with mild soap and water.
- Filter Replacement: Replace the Brita Standard Filter every 40 gallons or approximately every 2 months, based on average family usage. Follow the filter indicator for optimal performance.
Image: Diagram highlighting the Brita dispenser's features such as easy to fill and clean, BPA-free construction, and fridge-friendly size.
Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice. | No water in reservoir; power not connected; ambient temperature too high. | Fill water reservoir; check power connection; ensure proper ventilation and cooler environment. |
| 'ADD WATER' indicator is on. | Water level is low. | Refill the water reservoir with potable water. |
| 'ICE FULL' indicator is on. | Ice basket is full. | Remove ice from the basket. |
| Brita dispenser filters slowly. | Filter is clogged or needs replacement. | Replace the Brita filter as indicated by the filter life indicator or after 2 months/40 gallons. |
| Water tastes unusual from Brita dispenser. | Filter needs replacement. | Replace the Brita filter. |
Specifications
Silonn Ice Maker
- Ice Production: 9 cubes in 6 minutes
- Daily Capacity: Up to 26 lbs (11.8 kg) in 24 hours
- Ice Shape: Bullet
- Ice Sizes: 2 (Small, Large)
- Installation Type: Countertop
- Voltage: 115 Volts
- Noise Level: Less than 35dB
- Refrigerant: R600a
- Features: Self-cleaning function, transparent lid, indicator lights
Image: An exploded view of the Silonn ice maker highlighting bullet-shaped ice cubes, advanced infrared sensor, and ultra-efficiency compressor.
Brita Water Filter Dispenser
- Capacity: 27 cups total (9-cup reservoir, 18-cup body)
- Material: BPA-free plastic
- Filter Type: Brita Standard Filter
- Filter Life: Approximately 40 gallons or 2 months
- Filtration: Reduces chlorine (taste & odor), mercury, copper, and more
- Features: Filter indicator, easy-pour spigot, fridge-friendly size
Warranty and Support
For specific warranty details, please refer to the documentation included with your product or visit the manufacturer's official website. Silonn offers US-based phone service for customer support.
For further assistance, you may visit the Silonn Store on Amazon.
