Onforu BDB60-3
Onforu 60W LED Flood Light User Manual
Model: BDB60-3
Product Overview
The Onforu 60W LED Flood Light is designed for outdoor use, providing bright and energy-efficient illumination. This model features three adjustable heads, allowing for wide area coverage and flexible light direction. It is IP65 waterproof, making it suitable for various outdoor environments.
Image: The Onforu 60W LED Flood Light, showcasing its three distinct, adjustable light heads.
Key Features:
- 60W Brightness & Energy Saving: Produces up to 6000lm brightness, equivalent to 220W traditional bulbs, saving over 80% electricity.
- Switch Controlled: Operates via a wall switch; no motion sensor, solar, or dusk-to-dawn features.
- Wide Area Illumination: Three adjustable light heads provide up to 270° illumination angle.
- IP65 Waterproof: Designed to withstand rain, sleet, or snow, suitable for entryways and yards.
- Efficient Cooling: Constructed from die-cast aluminum for superior heat dissipation and extended lifespan.
Image: An Onforu flood light illuminating a large outdoor area, demonstrating its 6000LM brightness and wide coverage.
Image: The Onforu flood light shown with water droplets, illustrating its IP65 waterproof rating.
Safety Information
- Always disconnect power before installation or servicing.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Do not look directly into the LED light source when illuminated.
- Ensure the mounting surface is stable and can support the weight of the fixture.
- Do not modify the product in any way, as this will void the warranty and may pose a safety risk.
What's in the Box
- Onforu 60W LED Flood Light (3 units)
- Mounting Hardware
- Instruction Manual (this document)
Setup and Installation
This flood light is designed for surface mount installation and requires hardwiring. Follow these steps carefully:
- Prepare the Installation Area: Ensure power is turned off at the circuit breaker before beginning. Select a suitable location for mounting, such as an eave or wall, ensuring it is a stable junction box.
- Mount the Fixture: Use the provided mounting hardware to securely attach the flood light base to the junction box.
- Wire the Light: Connect the electrical wires according to local electrical codes. Typically, this involves connecting the live, neutral, and ground wires from the fixture to the corresponding wires in the junction box. Ensure all connections are secure.
- Adjust Light Heads: Once securely mounted and wired, adjust the three light heads to your desired angles for optimal illumination. Each head can be independently adjusted.
- Restore Power: Turn on the power at the circuit breaker.
Image: A diagram illustrating the hardwired installation process for the flood light, emphasizing the need for a secure electrical connection.
Image: The flood light mounted under an eave, showing the flexibility of its adjustable light heads with angle indicators.
Operating Instructions
The Onforu 60W LED Flood Light is designed for simple operation via a standard wall switch.
- Turning On/Off: Use the connected wall switch to turn the flood light on or off.
- Adjusting Light Direction: Manually adjust each of the three light heads to direct illumination precisely where needed. The middle head adjusts up and down, while the side heads adjust up, down, and side-to-side.
Image: A hand flipping a wall switch, demonstrating the simple manual control of the flood light.
Maintenance
To ensure optimal performance and longevity of your Onforu LED Flood Light, follow these maintenance guidelines:
- Cleaning: Periodically clean the surface of the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the wiring and mounting for any signs of wear, damage, or loose connections. Address any issues promptly.
- No User-Serviceable Parts: The LED light source is integrated and not user-replaceable. Do not attempt to open the light heads.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Ensure all wiring connections are secure. Test or replace the wall switch. |
| Light flickers. | Loose wiring; unstable power supply. | Check all wiring connections. Consult an electrician to verify stable power supply. |
| Light output is dim. | Dirt or debris on the lens. | Clean the lens with a soft, damp cloth. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Onforu |
| Model Name | BDB60-3 |
| Power Source | Corded Electric |
| Wattage | 60 watts |
| Brightness | 6000 Lumen |
| Light Color | Cool White (6500K) |
| Material | Aluminum |
| Water Resistance Level | IP65 Waterproof |
| Product Dimensions | 10"L x 5"W x 4"H |
| Number of Light Sources | 3 |
| Control Method | Wall Switch (No motion sensor, no solar, no dusk to dawn) |
Image: A technical diagram displaying the dimensions of the Onforu flood light, including measurements for each adjustable head.
Warranty and Support
Onforu products are designed for durability and performance. For specific warranty details and terms, please refer to the warranty card included with your purchase or visit the official Onforu website.
For technical support, troubleshooting assistance, or any inquiries regarding your product, please contact Onforu Customer Service:
- Website: www.onforuled.com
- Email: Refer to your product packaging or website for contact email.
- Phone: Refer to your product packaging or website for contact number.
Please have your model number (BDB60-3) and purchase date available when contacting support.
Related documentsBDB60-3
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.