Stainless Steel Washing Machine Hose Instruction Manual
Model: E388
1. Introduction
Thank you for choosing the atadbtae Stainless Steel Washing Machine Hose. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new washing machine hose. Please read this manual thoroughly before use and retain it for future reference.
This hose is designed for universal compatibility with most washing machines and faucets, featuring a durable stainless steel braided construction for enhanced longevity and leak prevention.
2. Safety Information
- Always turn off the water supply to your washing machine before installation or maintenance.
- Ensure all connections are tight to prevent leaks. Do not overtighten.
- Regularly inspect the hose for any signs of wear, kinks, or damage. Replace immediately if damage is found.
- Do not expose the hose to sharp objects or excessive heat.
- Keep out of reach of children.
3. Package Contents
- 1 x Stainless Steel Washing Machine Hose (6FT)
- 1 x Quick Connect Faucet Adapter (55/64 inch / 22 mm female thread size)
- 1 x Quick Connect Faucet Adapter (15/16 inch / 24 mm male thread size)
- Additional washers/gaskets
Image: Overview of the Stainless Steel Washing Machine Hose and included quick connect adapters.
4. Setup and Installation
Follow these steps for proper installation of your washing machine hose:
4.1 Connecting to the Washing Machine
- Ensure the water supply to your washing machine is turned off.
- Locate the water inlet connection on your washing machine. The hose features a 90-degree elbow connector for a closer fit.
- Connect the 90-degree elbow end of the hose to the washing machine's water inlet. The hose is compatible with both 3/4" NPT and 3/4" GHT connections.
- Hand-tighten the connection, then use a wrench to tighten an additional quarter turn. Do not overtighten.
Image: Illustration showing how the hose connects to 3/4" NPT and 3/4" GHT washing machine inlets.
4.2 Connecting to the Faucet (Quick Connect)
The hose comes with quick connect faucet adapters for easy attachment to various sink faucets.
- Identify the thread size of your sink faucet. The kit includes adapters for 55/64 inch (22 mm) female thread and 15/16 inch (24 mm) male thread.
- Screw the appropriate quick connect adapter onto your faucet. Ensure a secure, leak-free fit.
- Attach the other end of the washing machine hose to the quick connect adapter on the faucet. This connection is designed for a simple push-and-lock mechanism.
- Once both ends are connected, slowly turn on the water supply and check for any leaks. Tighten connections if necessary.
Image: Connecting the quick connect adapter to a faucet with a female thread (55/64 inch / 22 mm).
Image: Connecting the quick connect adapter to a faucet with a male thread (15/16 inch / 24 mm).
Image: The hose installed, connecting a sink faucet to a portable washing machine.
5. Operating Instructions
Once the hose is securely installed and checked for leaks, you can operate your washing machine as usual. The hose is designed to withstand typical washing machine water pressures and temperatures.
- Ensure the quick connect adapter is firmly attached to the faucet before turning on the water.
- Always turn on the water supply slowly to prevent sudden pressure surges.
- After each use, it is recommended to turn off the water supply to the hose, especially if using a portable washing machine connected to a sink faucet.
Image: The hose is compatible with various washing machine types, including standard and portable models.
6. Maintenance
Proper maintenance will extend the life of your washing machine hose:
- Regular Inspection: Periodically check the entire length of the hose for any signs of wear, cracks, bulges, or corrosion. Pay close attention to the connections for any signs of leakage.
- Cleaning: If necessary, wipe the exterior of the hose with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: If the hose is removed for storage, ensure it is drained of water, coiled loosely, and stored in a cool, dry place away from direct sunlight or extreme temperatures. Avoid kinking the hose during storage.
- Gasket Check: Ensure the rubber gaskets inside the connectors are in good condition and properly seated before each installation to prevent leaks. Replace worn or damaged gaskets.
Image: The durable stainless steel braided construction of the hose, designed for long-term use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage at Connection Points | Loose connection, worn or missing gasket, cross-threaded connection. | Turn off water supply. Tighten connections. Check and replace gaskets if necessary. Ensure threads are aligned correctly. |
| Low Water Flow | Kink in hose, clogged filter screen (if applicable), partially closed water supply. | Check hose for kinks and straighten. Ensure water supply valve is fully open. Clean any filter screens in the washing machine inlet or faucet adapter. |
| Hose Appears Damaged | Physical damage, excessive wear. | Immediately turn off water supply and replace the hose. Do not attempt to repair a damaged hose. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | atadbtae |
| Model Number | E388 |
| Material | Stainless Steel |
| Color | Silver |
| Product Dimensions | 72"L x 0.98"W (6FT length) |
| Item Weight | 0.46 Kilograms (1.01 pounds) |
| Maximum Pressure | 3000 Kilopascal |
| Washing Machine Connection | 3/4" NPT and 3/4" GHT compatible (90-degree elbow) |
| Faucet Connection | Quick Connect with adapters for 55/64" (22mm) female and 15/16" (24mm) male threads |
9. Warranty and Support
For warranty information or technical support, please refer to the product listing on Amazon or contact atadbtae customer service directly. Keep your purchase receipt as proof of purchase.
