Important Safety Information
Please read all instructions carefully before using your SEALY Electric Blanket Heated Throw. Failure to follow these instructions may result in fire, electric shock, or injury.
- ETL and FCC Certifications: This heated throw blanket is ETL and FCC certified, ensuring it meets recognized safety standards.
- Overheating Protection: Equipped with built-in overheating protection to prevent the blanket from becoming excessively hot, ensuring safe sleep.
- Automatic Shut-Off: Features a programmable auto-off timer from 2 to 10 hours, providing peace of mind and energy efficiency.
- Proper Use: Do not use with infants, children, incapacitated persons, or persons insensitive to heat. Do not use with pets.
- Storage: Store the blanket properly when not in use, ensuring it is cool and dry.
Product Overview
The SEALY Electric Blanket Heated Throw is designed for ultimate comfort and warmth. It features double-sided Sherpa material, providing a soft and luxurious feel.
Key Features:
- Premium Material: Made of double-layered 240gsm Sherpa for a cozy and comfortable experience.
- 6 Fast Heating Levels: Adjustable heat settings from 95°F to 113°F to suit your preference.
- 2-10 Hours Auto-Off: Customizable timer for automatic shut-off.
- Over-Heat Protection: Enhanced safety feature.
- Machine Washable: Easy to clean and maintain.
- Even Heat Distribution: U-shaped coil structure for consistent warmth.
- Setting Memory: Remembers your last heat and time settings.

Image: The SEALY Electric Blanket Heated Throw, showcasing its soft texture and rich rust color.
Setup Instructions
Follow these steps to set up your heated throw blanket for first use:
- Connect the Coupler: Locate the connector on the blanket and the coupler on the controller cord. Align and firmly push them together until they click into place.
- Plug in the Power: Insert the power plug into a standard electrical outlet.
- Choose the Heat Level: Press the power button on the controller, then use the 'HEAT' button to select your desired warmth level.
Important: Not following this sequence may cause the electric blanket to not heat properly.

Image: Visual guide for connecting the controller, plugging into an outlet, and selecting a heat level.
Operating Instructions
Power On/Off:
- Press the power button (⏻) on the controller to turn the blanket on or off.
Adjusting Heat Settings:
- With the blanket powered on, press the 'HEAT' button to cycle through the 6 available heat levels (L, 2, 3, 4, 5, 6).
- The display will show the current heat level. Level 'L' is the lowest, and '6' is the highest (95°F - 113°F).
Setting the Auto-Off Timer:
- Press the 'TIME' button to select the desired auto-off duration (2h, 4h, 6h, 8h, 10h).
- The selected time will be displayed on the controller. The blanket will automatically turn off after the set time.

Image: Detailed view of the controller with buttons for heat, time, and power, displaying current settings.
Pre-Heat Function:
- The blanket features a pre-heat programmed function to quickly warm up before use.
Even Heat Distribution:
- The U-shaped coil structure ensures heat is distributed evenly across the entire blanket surface, preventing cold spots.

Image: An illustration showing the internal wiring of the blanket, highlighting the even distribution of heating elements.
Official Product Video: Enjoy the Luxury of Warmth
Video: An official product video from Sealy demonstrating the features and luxurious feel of the heated Sherpa throw blanket, highlighting its warmth and comfort.
Maintenance and Care
Proper care will extend the life of your heated throw blanket.
Machine Washing:
- Detach Controller: Always disconnect the controller cord from the blanket before washing.
- Cold Wash: Machine wash on a gentle cycle with cold water.
- Air Dry or Low Temperature: We recommend air-drying the blanket. If using a dryer, set it to a low temperature.
- Ensure Dryness: Do not plug in or use the blanket until it is completely dry.
Do Not:
- Do not iron the blanket.
- Do not dry-clean the blanket.

Image: A Sealy electric blanket being loaded into a washing machine, demonstrating its machine-washable design.
Troubleshooting
If your heated throw blanket is not functioning as expected, please review the following common issues:
- No Power: Ensure the power cord is securely connected to both the blanket and the electrical outlet. Check if the outlet is functional.
- Not Heating: Verify that the controller is properly attached to the blanket. Ensure a heat level is selected and the timer is set.
- Error Codes: If the controller displays an error code, try unplugging the blanket from the wall for a few minutes, then reconnecting it. If the error persists, contact customer service.
- Uneven Heat: Ensure the blanket is laid flat and not bunched up, which can affect heat distribution.
For further assistance, please refer to the Warranty & Support section.
Specifications
| Material | Double-sided 240gsm Sherpa |
| Color | Rust (Current Product) |
| Size | Throw Size 50" x 60" |
| Heating Levels | 6 (95°F - 113°F) |
| Auto-Off Timer | 2-10 Hours |
| Special Features | Breathable, Machine Washable, Skin Friendly, Over-Heat Protection, Pre-Heat Programmed, Setting Memory |
| Product Care | Machine Wash (detachable cord) |
| Model Name | KTHT-QBHSS-W |
| Certifications | ETL, FCC |
Warranty & Support
Your SEALY Electric Blanket Heated Throw is ETL certified for quality and safety.
If you have any questions or concerns about your blanket, please reach out to our customer service. We provide 7x24-hour online customer service to assist you at any time.
For warranty claims or technical support, please contact the manufacturer directly using the contact information provided in your product packaging or on the official Sealy website.