1. Important Safety Information
Please read all instructions carefully before using your Sealy Heated Mattress Pad. Failure to follow these instructions may result in electric shock, fire, or injury.
- This product is equipped with upgraded heating wires that meet ETL and FCC safety standards.
- An automatic shut-off function is included, which turns off the mattress pad after 1-9 hours of continuous use, depending on your setting.
- Always follow the care instructions to ensure safe usage and longevity of the product.
- Keep out of reach of children and pets.
- Do not use near water or in damp conditions.
- Do not use if the mattress pad is folded, bunched, or creased.
- Do not use with an adjustable bed that can pinch or crease the heating wires.
- Consult the user manual for detailed safety information and warnings.
2. Product Components
Your Sealy Heated Mattress Pad package includes:
- 1 x Sealy Heated Mattress Pad (Queen Size)
- 2 x Controllers (for Queen, King, Cal. King sizes; Twin/Full sizes include 1 controller)
- 1 x User Manual
3. Setup Instructions
- Unpack: Carefully remove the Sealy Heated Mattress Pad from its packaging.
- Check Mattress Fit: Ensure your mattress fits within the 17-inch (43.18 cm) pocket depth of the mattress pad. The elastic skirt is designed to fit snugly.
- Position Pad: Place the mattress pad directly on top of your mattress, ensuring it is spread out smoothly without any folds or creases.
- Secure Pad: Secure the mattress pad using the strong elastic skirt, pulling it over the corners and sides of your mattress. The 360° all-around elastic ensures a secure fit.
- Connect Controller(s): Plug the power cord(s) from the mattress pad into the controller(s). For Queen size, there are two controllers, one for each side of the bed. Ensure connections are firm.
- Plug In: Plug the controller(s) power cord(s) into a standard electrical outlet.
4. Operating Instructions
The Sealy Heated Mattress Pad features user-friendly controls for personalized comfort.
- Power On/Off: Press the 'ON/OFF' button on the controller to turn the mattress pad on or off.
- Temperature Settings: Use the 'Temp' buttons to cycle through the 10 available heat settings. The current setting will be displayed on the LCD screen.
- Auto Shut-Off Timer: Press the 'Timer' button to set the automatic shut-off duration from 1 to 9 hours. This feature provides peace of mind and energy efficiency.
- Comfort Mode: Activate 'Comfort Mode' for a pre-programmed heating cycle designed for optimal warmth.
- Normal Mode: Select 'Normal Mode' for standard heating operation.
- Dual Control (Queen Size and larger): For Queen, King, and Cal. King sizes, two controllers are provided, allowing each user to individually adjust their side's warmth level.
5. Maintenance and Care
Proper care ensures the longevity and performance of your heated mattress pad.
- Machine Washable: The Sealy Heated Mattress Pad is machine washable.
- Before Washing: Always unplug the power cord(s) from the controller(s) and the wall outlet before washing. Ensure the mattress pad has completely cooled down.
- Washing Instructions: Wash in a washing machine under 30°C (86°F) water temperature on a gentle cycle.
- Drying: Tumble dry on low heat or air dry. Ensure the mattress pad is completely dry before plugging it back in and powering it up.
- Do NOT: Dry clean, bleach, or iron the mattress pad. Do not plug in or power up the heated product while damp.
6. Troubleshooting
If you encounter any issues with your Sealy Heated Mattress Pad, please refer to the following common solutions:
- No Heat:
- Ensure all power cords are securely connected to the mattress pad, controller, and wall outlet.
- Check if the wall outlet is functional by plugging in another appliance.
- Verify the controller is turned on and a heat setting is selected.
- Uneven Heating:
- Ensure the mattress pad is spread out smoothly on the bed without any folds, bunches, or heavy objects on top.
- Allow sufficient time for the pad to preheat evenly across the surface.
- Controller Display Not Working:
- Unplug the controller from the wall outlet for 5 minutes, then plug it back in to reset.
- Check all connections to ensure they are secure.
- Automatic Shut-Off Too Soon:
- Verify the timer setting on your controller. Adjust it to your desired duration (1-9 hours).
If these steps do not resolve the issue, please contact customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 80 x 60 x 17 inches (Queen Size) |
| Item Weight | 6.78 pounds |
| Brand | Sealy |
| Model | Queen |
| Material | Polyester (Felt Fabric Top) |
| Color | White |
| Heat Settings | 10 Levels |
| Auto Shut-Off | 1-9 Hours Programmable |
| Deep Pocket Fit | Up to 17 inches |
| Care Instructions | Machine Washable |
| Included Components | Electric mattress pad, 2 controllers, user manual |
8. Warranty and Support
Sealy is committed to providing quality products and support. While specific warranty details are not provided in this document, Sealy heated products are engineered and tested beyond industry standards for high quality and long-lasting durability.
If you have any questions about your heated mattress pad, require assistance with setup, operation, or troubleshooting, please contact Sealy customer support. Our team is dedicated to providing the best support to ensure your healthy and balanced life.
For customer support, please refer to the contact information provided on the product packaging or the official Sealy website.
