WOODBRIDGE BJ400+F0041CH 72-inch Whirlpool Air Bubble Bathtub User Manual

1. Introduction and Safety Information

Thank you for choosing the WOODBRIDGE BJ400+F0041CH Freestanding Combination Bathtub. This manual provides essential information for the safe installation, operation, and maintenance of your new bathtub. Please read this manual thoroughly before installation and use, and retain it for future reference.

Important Safety Instructions:

Always follow local plumbing and electrical codes. Professional installation is highly recommended.
Ensure the bathtub is properly grounded to prevent electrical shock.
Do not operate the bathtub without water.
Maintain water temperature below 104°F (40°C) to avoid hyperthermia.
Keep children away from the bathtub unless supervised by an adult.
Avoid using abrasive cleaners or sharp objects that could damage the acrylic surface.

2. Product Overview

The WOODBRIDGE BJ400+F0041CH is a 72-inch freestanding combination bathtub designed for a luxurious bathing experience. It integrates whirlpool jets, air bubble jets, an inline heater, and chromatherapy lighting, all controlled via an intuitive LED panel.

Key Features:

Whirlpool Jets: 6 adjustable body massage jets provide a concentrated, high-pressure massage.
Air Bubble Jets: 10 whirlpool bubble bath jets deliver a gentle, effervescent full-body massage.
Inline Heater: Maintains desired water temperature for extended soaking.
Chromatherapy Lighting: Multi-color LED lighting to enhance your bathing ambiance.
LED Control Panel: User-friendly interface for managing all functions.
Pre-installed Faucet: Includes a tub filler with a hand shower for convenience.
Premium Construction: Made from 100% high gloss white LUCITE acrylic, reinforced with ASHLAND resin & fiberglass.

Product Visuals:

WOODBRIDGE BJ400+F0041CH Freestanding Bathtub with water and blue LED lighting — The WOODBRIDGE BJ400+F0041CH freestanding bathtub with water and blue LED lighting, showcasing its elegant design.

Top-down view of the bathtub with active air bubbles and blue LED light — A top-down view of the bathtub with active air bubbles and blue LED light, highlighting the jet placement.

Diagram illustrating the whirlpool jets and their function for a powerful hydro massage.

Diagram illustrating the air jets and their gentle full body massage.

Bathtub with steam and text 'Inline Heater' indicating the heating function — The inline heater maintains water temperature, shown with steam rising from the tub.

Close-up of the LED control panel with various function icons — Close-up of the LED control panel, detailing controls for wave massage, temperature display, lighting, thermostat, power, and air blower.

3. Specifications

Feature	Detail
Exterior Dimensions	72" L x 35-3/8" W x 32-5/8" H
Effective Tub Capacity	65 Gallons
Water Depth to Overflow	14-1/2"
Power Requirement	1 dedicated 110-120V 30AMP breaker
Material	100% High Gloss White LUCITE Acrylic, reinforced with ASHLAND Resin & Fiberglass
Whirlpool Jets	6 adjustable body massage jets
Air Bubble Jets	10 whirlpool bubble bath jets
Included Components	Bathtub, Pre-installed Faucet, Pre-assembled Chrome Drain and Overflow
Certifications	UL1795, ASME A112.19.7/CSA B45.10, CSA B45.5/IAPMO Z124, CSA C22.2 No.218. IPC and NPC.

Detailed technical drawing with dimensions of the WOODBRIDGE BJ400+F0041CH bathtub — Technical drawing showing detailed dimensions and internal components of the BJ400+F0041CH bathtub.

4. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your bathtub. It is strongly recommended that installation be performed by a qualified and licensed plumber and electrician.

Pre-Installation Checks:

Verify that the floor can support the weight of the filled bathtub and bather(s).
Ensure adequate space for the bathtub dimensions (72" L x 35-3/8" W x 32-5/8" H).
Confirm that a dedicated 110-120V 30AMP electrical breaker is available for power.
Inspect the bathtub for any shipping damage before installation.

Installation Steps (Summary):

Positioning: Carefully move the bathtub to its desired location.
Plumbing Connections: Connect the pre-installed tub filler to your hot and cold water supply lines. Ensure all connections are watertight. The pre-assembled chrome drain and overflow should be connected to your floor drain.
Electrical Connections: A qualified electrician must connect the bathtub's electrical system to the dedicated 110-120V 30AMP circuit. Refer to the detailed wiring diagram in the full installation manual.
Leveling: Adjust the bathtub's feet to ensure it is perfectly level.
Testing: Fill the tub with water and test all functions (whirlpool, air bubble, heater, chromatherapy, faucet, hand shower) for proper operation and leak detection.

For detailed, step-by-step installation instructions, please refer to the comprehensive installation manual included with your product packaging.

5. Operating Instructions

Your WOODBRIDGE BJ400+F0041CH bathtub features an intuitive LED control panel to manage all its functions. Ensure the tub is filled with water above the jets before activating any jet or heater functions.

LED Control Panel Functions:

Power ON/OFF: Press the power button to turn the system on or off.
Thermostat/Heater: Use the thermostat controls to set your desired water temperature. The inline heater will maintain this temperature.
Whirlpool Jets (Wave Massage): Press the 'Wave Massage' button to activate the 6 adjustable whirlpool jets. Adjust jet direction as desired.
Air Blower (Air Bubble Jets): Press the 'Air Blower' button to activate the 10 air bubble jets for a gentle massage.
Bottom Light (Chromatherapy): Press the 'Bottom Light' button to cycle through various LED colors or set a specific color for chromatherapy.
Display Screen: Shows the current water temperature.

Faucet and Hand Shower Operation:

Tub Filler: Use the main faucet handle to control water flow into the tub.
Hand Shower: Pull out the hand shower to use. A pause control button on the hand shower temporarily holds water pressure.

Operational Videos:

Video demonstrating the various features and operation of the WOODBRIDGE BJ400+F0041CH bathtub, including jets, lighting, and faucet.

Another video showcasing the functions and user experience of the WOODBRIDGE BJ400 series bathtub.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your WOODBRIDGE bathtub.

Cleaning the Bathtub Surface:

Use a soft cloth and a non-abrasive, mild bathroom cleaner.
Avoid cleaners containing harsh chemicals, ammonia, or abrasive particles, as these can damage the acrylic finish.
Rinse thoroughly with clean water after cleaning.

Jet and Plumbing Maintenance:

Periodically clean the stainless steel jets to prevent mineral buildup.
For a deeper clean of the jet system, fill the tub with warm water and add a small amount of dishwasher detergent or a specialized jet cleaner. Run the whirlpool and air bubble functions for 10-15 minutes, then drain and rinse.
Ensure the full-draining jets are clear of debris for proper water evacuation.

7. Troubleshooting

If you encounter issues with your bathtub, refer to the following common troubleshooting steps. For complex problems, contact customer support or a qualified technician.

Problem	Possible Cause	Solution
No power to the tub	Circuit breaker tripped, loose electrical connection	Check the dedicated 30AMP circuit breaker. Ensure all electrical connections are secure (consult an electrician).
Jets not working	Insufficient water level, pump issue, clogged jets	Ensure water level is above the jets. Check for debris in jets. If pump issue, contact support.
Heater not maintaining temperature	Thermostat setting incorrect, heater malfunction	Verify temperature setting on the LED panel. Ensure the heater function is activated.
Water leakage	Loose plumbing connections, damaged seals	Immediately turn off water supply and power. Inspect all plumbing connections. Contact a plumber for repair.

8. Warranty and Support

WOODBRIDGE stands behind the quality of its products. Your BJ400+F0041CH bathtub comes with a standard warranty. You can get an extra 1-year warranty by logging in and registering your product on the official WOODBRIDGE website.

For any questions, technical assistance, or warranty claims, please contact our US-based customer support team. Our team is dedicated to providing fast and reliable assistance.

Contact Information: Please refer to the contact details provided on the WOODBRIDGE official website or in your product packaging for the most up-to-date support information.