1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Festool 577616 Impact Driver and Drill Set. This set includes the TID 18 HPC Cordless Impact Screwdriver and the QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill. Designed for versatility and flexibility on the job site, these tools are suitable for various drilling and driving tasks in multiple materials.
Figure 1: Overview of the Festool 577616 Impact Driver and Drill Set components.
2. Important Safety Instructions
Always observe the following safety precautions to reduce the risk of electric shock, fire, and serious injury.
- Read all instructions: Familiarize yourself with the tool's operation and safety guidelines before use.
- Wear personal protective equipment: Always wear eye protection, hearing protection, and suitable gloves.
- Maintain a safe work area: Keep the work area clean, well-lit, and free from obstructions.
- Secure workpiece: Always clamp or otherwise secure the workpiece to prevent movement during operation.
- Avoid accidental starting: Ensure the switch is in the off-position before inserting the battery pack, picking up or carrying the tool.
- Use the correct tool for the job: Do not force a small tool or attachment to do the job of a heavy-duty tool.
- Disconnect power: Remove the battery pack before making any adjustments, changing accessories, or storing the tool.
- Store idle tools: When not in use, tools should be stored in a dry, high, or locked-up place out of reach of children.
- Inspect tools regularly: Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation.
- Battery safety: Use only specified battery packs and chargers. Do not incinerate battery packs, even if they are severely damaged.
3. Included Components
The Festool 577616 set includes the following items:
- TID 18 Cordless Impact Screwdriver
- QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill
- Two (2) BP 18 Li 4.0 ASI Battery Packs
- Rapid Charger TCL 6
- FastFix Keyless Chuck (1/2”/13mm)
- FastFix Right Angle Chuck
- Additional Side Mounted Handle
- Belt Clip
- Systainer SYS3 M 237 storage case
Figure 2: Detailed view of the TID 18 Impact Driver, TPC 18/4 Hammer Drill, and various chucks.
4. Setup and Initial Use
4.1. Charging the Battery Packs
- Connect the Rapid Charger TCL 6 to a suitable power outlet.
- Slide a BP 18 Li 4.0 ASI Battery Pack onto the charger until it clicks into place.
- The charger's indicator light will show the charging status. A solid green light indicates a full charge.
- Once fully charged, remove the battery pack from the charger.
Figure 3: Festool BP 18 Li 4.0 ASI Battery Packs.
4.2. Attaching Accessories
Both the TID 18 and TPC 18/4 feature the FastFix system for quick accessory changes.
- FastFix Keyless Chuck (1/2”/13mm): For standard drilling and driving bits. Align the chuck with the spindle and twist to secure.
- FastFix Right Angle Chuck: For working in confined spaces. Attach similarly to the keyless chuck.
- Additional Side Mounted Handle: For increased control and stability, especially with the TPC 18/4. Attach to the designated collar on the drill.
- Belt Clip: Can be attached to either side of the tool for convenient carrying.
5. Operation
5.1. TID 18 Cordless Impact Screwdriver
The TID 18 is designed for efficient fastening with its powerful brushless EC-TEC motor.
- Speed Levels: The tool features three speed levels for various applications. Select the appropriate speed using the speed selector switch.
- T Mode: Utilize the specialized T mode for self-tapping screws, which helps prevent overtightening and stripping.
- Kickback-Free Hammer Mechanism: This mechanism drives fasteners effectively, reducing user fatigue and improving control.
- Bit Holder: The tool has a tool-free 1/4-inch bit holder and integrated bit storage for convenience.
- LED Illumination: An optimum LED light illuminates the work area.
Figure 4: Using the TID 18 Impact Driver for fastening applications.
5.2. QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill
The TPC 18/4 is a versatile drill for drilling into various materials, including masonry with its percussion function.
- Drilling Modes: Switch between drilling, hammer drilling, and screwdriving modes as required by the application.
- Speed Control: Adjust the speed for optimal performance based on the material and bit size.
- Ergonomics: The compact design and optional side handle allow for accurate and comfortable work, even in hard-to-reach areas.
Figure 5: The TPC 18/4 Hammer Drill in use.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Festool tools.
- Cleaning: Keep ventilation openings clear and clean. Use a soft, damp cloth to wipe down the tool exterior. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Store battery packs in a cool, dry place. Avoid fully discharging lithium-ion batteries for extended periods.
- Storage: Store the tools and accessories in the Systainer SYS3 M 237 case in a dry, secure location away from direct sunlight and extreme temperatures.
- Inspection: Periodically check all screws and fasteners for tightness. Inspect power cords (for charger) for damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start. | Battery not inserted correctly or discharged. | Ensure battery is fully seated. Charge battery if necessary. |
| Reduced power or performance. | Low battery charge, incorrect speed setting, or dull bit/accessory. | Charge battery. Select higher speed. Replace or sharpen bit. |
| Tool overheats. | Overloading the tool or blocked ventilation. | Reduce load. Allow tool to cool. Clean ventilation openings. |
| Chuck not holding bit securely. | Chuck not tightened properly or damaged. | Ensure chuck is fully tightened. Inspect chuck for damage; replace if necessary. |
For issues not listed here, please contact Festool Service.
8. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Festool |
| Model Number | 577616 |
| Power Source | Battery Powered |
| Voltage | 18 Volts |
| Battery Capacity | 4 Amp Hours (each BP 18 Li 4.0 ASI) |
| Maximum Rotational Speed | 3.6E+2 RPM (360 RPM) |
| Number of Speeds | 3 |
| Maximum Power | 850 Watts |
| Drill Type | Hammer Drill (TPC 18/4) |
| Drilling Capacity Wood | 0.5 Inches |
| Drilling Capacity Metal | 0.5 Inches |
| Item Weight | 17.91 Pounds (total set) |
| Product Dimensions | 15.59"L x 11.65"W x 9.33"H |
9. Warranty Information
This Festool product is covered by a 3-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full details on warranty terms and conditions, please refer to the official Festool warranty documentation or contact Festool Service.
10. Customer Support
For technical assistance, service, or spare parts, please contact Festool Service. Detailed contact information can be found on the official Festool website or through your authorized Festool dealer. Festool is committed to providing comprehensive support for its products.
Visit the official Festool store for more information: Festool Store on Amazon
