Devoko D-160

Devoko Electric Standing Desk D-160 User Manual

Model: D-160

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Devoko Electric Standing Desk D-160. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

The Devoko Electric Standing Desk D-160 features electric height adjustment, a sturdy steel frame, and a smart control panel with memory settings. Its design promotes a healthier work environment by allowing seamless transitions between sitting and standing positions.

Setup and Assembly

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list. Assembly typically requires two people.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components against the parts list.
  2. Attach Lifting Columns to Feet: Secure the lifting columns to the desk feet using the provided screws. Ensure the feet are oriented correctly for stability.
  3. Install Crossbar/Frame: Connect the crossbar components to the lifting columns. This forms the main frame of the desk.
  4. Mount Desktop: Carefully place the desktop panels onto the assembled frame. Align the pre-drilled holes and secure the desktop using the provided screws. The desktop consists of multiple panels (4 table boards for 160x80cm).
  5. Connect Control Panel and Motor: Attach the smart control panel to the underside of the desktop in the designated area. Connect the motor cables to the control box and then to the control panel. Ensure all connections are secure.
  6. Cable Management: Utilize the integrated cable management features, such as wire collecting holes and cable trays, to organize and secure all power and control cables.
  7. Initial Calibration: After assembly, plug in the desk. Perform an initial calibration by pressing and holding the "Down" button until the desk reaches its lowest point and slightly retracts. This synchronizes the motors.
Devoko Electric Standing Desk in an office setting with a computer, chair, and filing cabinet.
Figure 1: The Devoko Electric Standing Desk D-160 in a typical office environment, showcasing its design and functionality.
Top-down view of the Devoko Electric Standing Desk showing dimensions of 160cm length and 80cm width.
Figure 2: Overview of the desk surface, illustrating the 160cm x 80cm dimensions of the desktop.
Close-up of the Devoko Electric Standing Desk leg showing sturdy steel construction and dimensions of 80x50mm for the leg and 70cm for the foot.
Figure 3: Detail of the desk's sturdy steel leg construction, highlighting the 80x50mm leg profile and 70cm foot length for enhanced stability.

Operating Instructions

Your Devoko Electric Standing Desk D-160 is equipped with a smart control panel for easy height adjustment and memory functions.

Control Panel Functions

Close-up of the Devoko Electric Standing Desk control panel with buttons labeled 1, 2, 3 for memory settings, a clock icon for time reminder, an LED display showing '086', and up/down arrows. Icons below indicate 3 Memory Setting, Time Reminder, Up and Down, LED Display, USB Charging, and Lock Settings.
Figure 4: The smart control panel, detailing buttons for memory presets, time reminder, height adjustment, LED display, USB charging, and lock settings.
  • Up/Down Buttons (▲ / ▼): Press and hold to adjust the desk height upwards or downwards. Release the button to stop at the desired height. The current height is displayed on the LED screen.
  • Memory Presets (1, 2, 3): The desk has 3 programmable memory settings.
    1. Adjust the desk to your desired height using the Up/Down buttons.
    2. Press the "M" or "Set" button (if available, otherwise assume direct press on 1,2,3). Then press the desired number button (1, 2, or 3) within 3 seconds. The LED display will show "S-1", "S-2", or "S-3" to confirm the setting is saved.
    3. To recall a saved height, simply press the corresponding number button (1, 2, or 3). The desk will automatically move to that preset height.
  • Time Reminder (Clock Icon): This feature can be set to remind you to change your posture. Consult the full manual for specific programming steps for the timer.
  • Lock Settings: This function prevents accidental height adjustments. Consult the full manual for specific instructions on how to activate and deactivate the lock.
  • USB Charging Port: A USB port is integrated into the control panel for convenient charging of your devices.

Anti-Collision Technology

The desk is equipped with an anti-collision sensor to prevent damage. If the desk encounters an obstacle during movement, it will automatically stop and reverse slightly. Ensure the area around the desk is clear before adjusting the height.

Cable Management Features

Four images showing desk features: 1. Wire collecting hole with a cable passing through. 2. Hooks for headphones. 3. Cable management tray under the desk. 4. USB charging port on the control panel. 5. Stickable storage design for cables. 6. Anti-collision technology with an arrow indicating upward movement stopping at an obstacle. 7. Stabilizing footrests.
Figure 5: Various integrated features including wire collecting holes, hooks, cable management tray, USB charging port, stickable cable organizers, anti-collision technology, and stabilizing footrests.
  • Wire Collecting Hole: Use the integrated grommet to route cables neatly through the desktop.
  • Hooks: Utilize the side hooks for hanging headphones or other accessories.
  • Cable Management Tray: Secure power strips and excess cables in the tray located under the desktop.
  • Stickable Storage Design: Use the provided cable clips to further organize and secure cables along the desk frame.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Devoko Electric Standing Desk D-160.

  • Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • Cable Inspection: Periodically check all cables and connections for wear or damage. Ensure they are securely plugged in and not pinched.
  • Motor Check: Listen for any unusual noises during height adjustment. If you notice any issues, refer to the troubleshooting section or contact customer support.
  • Weight Limit: Do not exceed the maximum weight capacity of 70 kg (154 lbs) to prevent damage to the motor and frame.

Troubleshooting

If you encounter issues with your Devoko Electric Standing Desk D-160, refer to the following common problems and solutions:

Problem Possible Cause Solution
Desk does not move. Power cable disconnected; control panel cable loose; motor error. Check power connection. Ensure all cables are securely connected. Perform a reset (unplug for 10 seconds, then plug back in and hold down button for calibration).
Desk moves unevenly or makes unusual noise. Overload; uneven weight distribution; motor issue. Reduce weight on the desk. Redistribute items evenly. Perform calibration. If problem persists, contact support.
Anti-collision sensor triggers frequently. Obstruction in path; sensor sensitivity. Ensure clear path during movement. Check for any loose cables or objects.
Memory presets not working. Presets not saved correctly. Re-save your desired heights following the "Operating Instructions" section.

If these solutions do not resolve the issue, please contact Devoko customer support for further assistance.

Specifications

Detailed specifications for the Devoko Electric Standing Desk D-160:

  • Brand: Devoko
  • Model Number: D-160
  • Product Dimensions (D x W x H): 31.5" x 62.99" x 28.35" (72 cm to 116 cm height adjustable)
  • Desktop Size: 160 x 80 cm (Splice board, 2.5cm thickness)
  • Height Adjustment Range: 72 cm to 116 cm (28.35" to 45.67")
  • Maximum Weight Capacity: 70 kg (154 lbs)
  • Frame Material: Heavy-duty Alloy Steel
  • Leg Dimensions: 80 x 50 mm
  • Special Features: Electric Height Adjustable, 4-Memory Smart Panel, Anti-Collision Technology, USB Charging Port, Cable Management (Wire Collecting Hole, Hooks, Cable Tray)
  • Assembly Required: Yes (All assembly tools included)
  • Power Type: Electric

Warranty and Support

Devoko provides a comprehensive warranty and dedicated customer support for your product.

  • Warranty: We provide a 5-year warranty for the desk frame and motor.
  • Customer Support: For any questions regarding your product (pre-sales inquiries, damaged parts, product quality, etc.), please contact Devoko customer service. We aim to respond within 24 hours with a professional solution.
  • Contact Information: Please refer to your purchase documentation or the official Devoko website for the most current contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.