Introduction
Thank you for choosing the VOWNER Vanity with Lights. This makeup vanity desk is designed to enhance your daily beauty routine with its integrated lighting, convenient power outlets, and ample storage solutions. Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.
Safety Information
- Ensure all components are securely fastened before use.
- Do not overload the power outlets or USB ports.
- Keep liquids away from electrical components.
- Place the vanity on a stable, level surface to prevent tipping.
- Keep small parts out of reach of children during assembly.
- Wipe with a dry cloth only. Avoid abrasive cleaners.
Package Contents
Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Vanity Desk Components
- Tri-folding Mirror with Lighting Bulbs
- Stool
- 5 Rotating Drawers
- Power Outlet Unit (2 AC outlets, 2 USB ports)
- Assembly Hardware (screws, connectors, etc.)
- Instruction Manual
Setup and Assembly
Assembly of the VOWNER Vanity requires careful attention to detail. All pieces are numbered for easy identification. It is recommended to have a Phillips head screwdriver or a drill with a Phillips bit for efficient assembly. An extra set of screws is included in case any are misplaced.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify each part using the provided numbering in the assembly guide.
- Follow the step-by-step pictorial instructions carefully.
- Securely fasten all screws and connectors. Do not overtighten.
- Attach the tri-folding mirror to the main desk unit.
- Install the rotating drawers into their designated slots.
- Connect the power outlet unit and ensure the power cord is routed safely.
- Assemble the stool according to its specific instructions.
Figure 1: Detailed dimensions of the vanity desk and its components.
Figure 2: Assembled VOWNER Vanity with Lights, showcasing its corner design and features.
Operating Instructions
Lighting System
The vanity features a tri-folding mirror with integrated lighting bulbs. These lights offer three color lighting modes and adjustable brightness to suit various makeup needs.
- Power On/Off: Locate the touch sensor or switch on the mirror frame to turn the lights on or off.
- Change Color Mode: Tap the touch sensor or switch repeatedly to cycle through the three color modes: Cool White, Warm White, and Warm Yellow.
- Adjust Brightness: Press and hold the touch sensor or switch to gradually increase or decrease the brightness. Release when the desired brightness is achieved.
Figure 3: Demonstration of the three adjustable lighting color modes.
Power Outlet and USB Ports
A built-in power strip is conveniently located on the side of the vanity, providing easy access to power for your beauty tools and devices.
- AC Outlets: Two standard 125V/12A AC outlets are available for plugging in hair dryers, curling irons, or other beauty appliances.
- USB Ports: Two 5V/2A USB ports are provided for charging smartphones, tablets, or other USB-powered devices.
- Ensure the vanity's main power cord (4.9 feet long) is securely plugged into a wall outlet before using the integrated power strip.
Figure 4: Built-in power strip with AC outlets and USB ports.
Rotating Drawers
The vanity includes five rotating drawers designed for efficient storage and easy access to your cosmetics and accessories.
- Each drawer can be rotated outwards for full access to its contents.
- Gently push the drawers back into alignment with the vanity when not in use to save space.
Figure 5: The unique rotating drawer design for convenient storage.
Maintenance
- Cleaning: Wipe the vanity surfaces with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaning materials that may damage the finish.
- Mirror Care: Clean the mirror surface with a glass cleaner and a soft, lint-free cloth.
- Drawer Magnets: Periodically check the magnets that keep the drawers closed. If a magnet becomes loose, it can be re-secured with appropriate adhesive.
- Bulb Replacement: If a light bulb needs replacement, ensure the vanity is unplugged. Replace with bulbs of the same type and wattage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights not turning on. | Power cord not plugged in; bulb loose or faulty; power strip switch off. | Ensure power cord is securely plugged in. Check if bulbs are screwed in tightly. Verify the power strip is on. Replace faulty bulbs. |
| Power outlets/USB ports not working. | Vanity not plugged in; device not properly connected; overloaded circuit. | Confirm the vanity is plugged into a live wall outlet. Ensure devices are fully inserted. Unplug some devices if overloaded. |
| Vanity feels unstable or "rocky". | Uneven floor; loose assembly screws. | Place the vanity on a level surface. Re-tighten all assembly screws, ensuring not to overtighten. |
| Drawers do not close properly. | Misaligned; loose magnet. | Ensure drawers are properly aligned with their tracks. Re-secure any loose magnets with appropriate adhesive. |
Specifications
- Model: VOWNER-112
- Dimensions (L x W x H): 21 x 43 x 56 inches
- Number of Drawers: 5
- Power Outlets: 2 AC Outlets (125V/12A)
- USB Ports: 2 USB Ports (5V/2A)
- Power Cord Length: 4.9 Feet
- Color: White
- Manufacturer: VOWNER
- Care Instructions: Wipe with Dry Cloth
Warranty and Support
For warranty information, technical support, or any questions regarding your VOWNER Vanity with Lights, please refer to the contact information provided on the product packaging or visit the official VOWNER website. Please retain your purchase receipt for warranty claims.