1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JENSEN CAR110W 10-inch Touch Screen Single DIN Car Stereo Media Receiver. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Front view of the JENSEN CAR110W 10-inch touch screen car stereo, displaying the main menu with options for Radio, USB, Bluetooth Phone, Android Auto, and Apple CarPlay. The included license plate style backup camera is shown below the unit.
2. Product Features
- 10-inch LCD Touch Screen: Features a 10-inch LCD display with 1024 x 600 resolution. The screen is adjustable for optimal viewing.
- Apple CarPlay: Integrates with iPhone for navigation, calls, messages, and music via Siri or touch control.
- Android Auto: Integrates with Android phones for navigation, calls, messages, and music via voice commands or touch control.
- Built-in Bluetooth: Enables hands-free calling with phonebook support and wireless audio streaming from compatible devices.
- Backup Camera Included: Comes with a license plate style backup camera (BUCAM350) for enhanced rear visibility.
- USB Inputs: Includes front (2.1 Amp) and rear (1.5 Amp) USB ports for media playback and fast charging.
- Audio Customization: Offers 3 pairs of 4V RCA preamp outputs (Front/Rear/Subwoofer), 8 EQ presets (Default, Custom, Classic, Rock, Jazz, Electric, Pop, Soft), and Time Alignment capabilities.
- SiriusXM-Ready: Compatible with SiriusXM (requires SiriusXM Connect Vehicle Tuner and subscription, sold separately).
3. Package Contents
Verify that all items are present in the package:
- JENSEN CAR110W Car Stereo Receiver
- Main Wiring Harness
- Microphone
- License Plate Style Backup Camera (BUCAM350)
- GPS Antenna
- RCA Cables
- Mounting Hardware
Assortment of accessories included with the JENSEN CAR110W, including the main wiring harness, RCA cables, microphone, GPS antenna, and mounting hardware.
Close-up view of the included license plate style backup camera (BUCAM350) with its wiring harness, designed for rear vehicle visibility.
4. Installation Guide
Professional installation is highly recommended for this product. Incorrect installation can lead to damage to the unit or vehicle, and may void the warranty. Always disconnect the vehicle's battery before beginning any electrical work.
4.1 Mounting the Unit
The CAR110W is designed for single DIN installations. The adjustable screen allows for flexible positioning. Ensure adequate clearance for the screen's movement and visibility.
Side view of the JENSEN CAR110W, illustrating the adjustable screen mechanism that allows for flexible positioning of the 10-inch display relative to the single DIN chassis.
4.2 Wiring Connections
Refer to the wiring diagram provided with the main harness. Connect the power, ground, accessory, speaker, and other input/output wires according to your vehicle's specifications. Ensure all connections are secure to prevent shorts or intermittent operation.
- Power (Yellow): Connect to constant 12V power.
- Ground (Black): Connect to vehicle chassis ground.
- Accessory (Red): Connect to switched 12V power.
- Speaker Wires: Connect to appropriate vehicle speakers (Front Left, Front Right, Rear Left, Rear Right).
- Backup Camera Input: Connect the included backup camera's video output to the dedicated camera input on the receiver.
- GPS Antenna: Connect the GPS antenna to the designated port for navigation features.
- SiriusXM Tuner (Optional): If using SiriusXM, connect the tuner (sold separately) to the SXM port.
Rear view of the JENSEN CAR110W car stereo, showing various input and output ports including GPS antenna, radio antenna, SiriusXM, and main wiring harness connections.
5. Operating Instructions
5.1 Power On/Off and Volume
- Power: Press the VOL/PWR knob to turn the unit on or off.
- Volume: Rotate the VOL/PWR knob to adjust the volume level.
5.2 Main Menu Navigation
From the main menu, tap the desired icon to access functions such as Radio, USB, Bluetooth Phone, Android Auto, or Apple CarPlay.
5.3 Bluetooth Operation
- Pairing: Enable Bluetooth on your mobile device and search for "JENSEN CAR110W". Select it to pair.
- Hands-Free Calling: Once paired, you can make and receive calls directly from the receiver's screen.
- Audio Streaming: Stream music wirelessly from your paired device.
5.4 Apple CarPlay
Connect your iPhone to the unit's USB port. The CarPlay interface will automatically launch. You can then use Siri voice commands or the touch screen to access navigation, communication, and audio features.
5.5 Android Auto
Connect your Android phone to the unit's USB port. The Android Auto interface will automatically launch. Use voice commands or the touch screen for navigation, communication, and media playback.
5.6 USB Media Playback and Charging
Insert a USB drive into either the front or rear USB port for media playback. The USB ports also provide charging capabilities for connected devices.
Detail view of the USB input port located on the side of the JENSEN CAR110W display, used for media playback and device charging.
5.7 Radio Operation
Select the Radio icon from the main menu. Use the touch screen controls to tune to desired stations, scan, or save presets.
5.8 Backup Camera Display
When the vehicle is shifted into reverse, the display will automatically switch to the backup camera view, providing visual assistance for parking and maneuvering.
6. Maintenance
- Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touch screen. Avoid abrasive cleaners or solvents.
- General Cleaning: Keep the unit free from dust and debris. Use a dry cloth for the main body.
- Temperature: Avoid exposing the unit to extreme temperatures.
7. Troubleshooting
If you encounter issues with your CAR110W, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Blown fuse, incorrect wiring, loose connection. | Check vehicle fuses and the unit's fuse. Verify power and ground connections. |
| No Sound | Speaker wires disconnected, volume too low, mute activated. | Check speaker connections. Increase volume. Deactivate mute function. |
| Bluetooth Not Connecting | Device not in pairing mode, incorrect pairing process. | Ensure Bluetooth is enabled on both devices. Delete previous pairings and re-attempt. |
| CarPlay/Android Auto Not Launching | Faulty USB cable, phone not compatible, software issue. | Use a certified USB cable. Ensure phone OS is up to date. Restart phone and unit. |
| Backup Camera Not Displaying | Camera not connected, reverse trigger wire not connected. | Verify camera video and power connections. Check reverse trigger wire connection. |
If problems persist, contact Jensen customer support or consult a qualified technician.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | CAR110W |
| Screen Size | 10.1 Inches |
| Display Type | LCD |
| Display Resolution | 1024 x 600 |
| Product Dimensions | 13 x 9 x 9 inches |
| Item Weight | 7.2 pounds |
| Connectivity Technology | Bluetooth, RCA, USB |
| Compatible Devices | Smartphone, Speaker |
| USB Charging | Front 2.1 Amp / Rear 1.5 Amp |
| Preamp Outputs | 3 Pairs of 4V RCA (F/R/S) |
9. Warranty and Support
9.1 Warranty Information
The JENSEN CAR110W comes with a 1-year warranty covering parts and labor. An extended 3-year warranty may be available upon product registration at Jensenmobile.com.
9.2 Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact Jensen customer support. Refer to the contact information provided in your product packaging or visit the official Jensen website for support resources.