Polibi Twin Size Wooden Loft Bed with Desk and Wardrobe Instruction Manual

1. Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your Polibi Twin Size Wooden Loft Bed. This multi-functional loft bed is designed to optimize space, offering a comfortable sleeping area, a dedicated study or work desk, a 2-door wardrobe, and three integrated drawers. Please read this manual thoroughly before beginning assembly or use to ensure safe and correct installation and operation.

2. Safety Information

Your safety is paramount. Please adhere to the following guidelines:

• Always ensure all hardware is securely tightened before and after assembly. Periodically check and re-tighten connections.
• The bed is equipped with comprehensive guardrails to prevent falls. Do not remove or modify these guardrails.
• The maximum weight capacity for the bed is 400 lbs. Do not exceed this limit.
• Do not allow children to play unsupervised on or around the loft bed.
• Ensure the bed is placed on a level surface to prevent instability.
• Mattress not included. Use a mattress that fits the bed dimensions and does not exceed the height of the guardrails.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Bed Frame Components (Headboard, Footboard, Side Rails)
• Ladder
• Desk Unit (Desk surface, support panels, drawer components)
• Wardrobe Unit (Side panels, back panel, doors, hanging rod, shelves)
• Bed Slats
• Hardware Pack (Screws, bolts, nuts, Allen wrench, etc.)
• Instruction Manual

4. Assembly Instructions

Assembly requires two adults. A power drill with an appropriate bit for Allen wrench screws is recommended to expedite the process. Ensure you have ample space to work.

Before You Begin

• Clear a large, open area for assembly.
• Unpack all boxes and lay out components. Organize parts by type and label.
• Review the entire instruction manual and diagrams before starting.

Step-by-Step Assembly

1. Assemble the Main Bed Frame: Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are snug but do not overtighten until the frame is fully aligned.
2. Attach the Ladder: Securely fasten the ladder to the designated side of the bed frame. Verify it is stable and can support weight.
3. Assemble and Integrate the Desk Unit: Construct the desk frame and drawers according to the diagrams. Attach the desk unit to the bed frame. Ensure drawers slide smoothly.
4. Assemble and Integrate the Wardrobe Unit: Assemble the wardrobe panels, install the hanging rod and shelves. Attach the wardrobe unit to the bed frame. Ensure doors open and close properly.
5. Install Bed Slats: Place the wooden slats across the bed frame, ensuring even spacing and secure attachment. These slats provide mattress support and ventilation.
6. Final Checks: Once assembly is complete, re-check all bolts and screws to ensure they are fully tightened. Confirm the bed is stable and does not wobble.

Image 1: Overall view of the Polibi Twin Size Wooden Loft Bed with integrated desk, drawers, and wardrobe.

Image 2: Detailed dimensions of the loft bed, desk, and wardrobe components.

Image 3: Close-up view of the integrated desk area with shelves and three drawers.

Image 4: Interior view of the 2-door wardrobe, showing the hanging rod and shelves.

Image 5: Detailed view of the three pull-out drawers integrated into the desk unit.

5. Operating Instructions

• Using the Bed: Access the bed via the ladder. Ensure the mattress is properly seated on the slats.
• Using the Desk: The integrated desk provides a surface for study or work. The shelves above the desk can be used for books or small items.
• Using the Drawers: The three drawers under the desk offer storage for personal items, stationery, or clothing. Pull gently to open and push to close.
• Using the Wardrobe: The 2-door wardrobe includes a hanging rod for clothes and shelves for folded items.

6. Maintenance and Care

• Cleaning: Wipe wooden surfaces with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
• Hardware Checks: Periodically inspect all bolts, screws, and connections. Re-tighten any loose hardware to maintain stability and safety.
• Ventilation: Ensure adequate air circulation around the mattress by regularly checking the bed slats.

7. Troubleshooting

• Bed feels wobbly: This is often due to loose connections. Re-check and tighten all assembly hardware, especially the main frame bolts. Ensure the bed is on a flat, even surface.
• Drawers do not slide smoothly or are misaligned: Verify that the drawer slides are correctly installed and aligned. Ensure the drawer components were assembled squarely. Minor adjustments may be needed.
• Wardrobe doors do not close properly: Check the hinges and magnetic catches for proper alignment and installation.

8. Specifications

9. Customer Support

If you have any questions regarding the assembly, operation, or maintenance of your Polibi Loft Bed, please do not hesitate to contact our customer service representatives. For assistance, refer to the contact information provided at the point of purchase or on the Polibi official website.