1. Introduction
Thank you for purchasing the SoBuy FBT115-W Nightstand. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
2. Safety Information
To ensure safe use of this product, please observe the following:
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand or sit on the table. The maximum load capacity is 25 kg (55 lbs).
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Use only the provided hardware. Substituting parts may compromise safety.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
3. Package Contents
Before assembly, verify that all components are present and undamaged. Refer to the included parts list for detailed identification.
Figure 1: Exploded view of the nightstand components. Please refer to the separate parts list for specific labels and quantities.
Typical Components:
- Top Panel (A)
- Side Panels (B, C)
- Bottom Panel (D)
- Back Panel (E)
- Drawer Fronts (F)
- Drawer Sides (G, H)
- Drawer Backs (I)
- Drawer Bottoms (J)
- Drawer Slides (K)
- Golden Handles (L)
- Golden Legs (M)
- Hardware Pack (screws, dowels, cam locks, etc.)
4. Assembly Instructions
Follow these steps carefully to assemble your SoBuy FBT115-W nightstand. It is recommended to have two people for assembly.
- Step 1: Attach Drawer Slides to Side Panels.
Identify the side panels (B, C) and the drawer slides (K). Secure the drawer slides to the inner sides of the panels using the provided screws. Ensure they are aligned correctly for smooth drawer operation.
- Step 2: Assemble the Main Frame.
Connect the top panel (A), side panels (B, C), and bottom panel (D) using dowels and cam locks/screws as indicated in the diagram. Ensure all connections are tight and the frame is stable.
- Step 3: Install the Back Panel.
Slide the back panel (E) into the grooves on the main frame or secure it with small nails/screws provided. This adds stability to the unit.
- Step 4: Assemble the Drawers.
For each drawer, connect the drawer sides (G, H), drawer back (I), and drawer front (F) using dowels and screws. Slide the drawer bottom (J) into the grooves. Attach the golden handles (L) to the drawer fronts.
Figure 2: Assembling the drawers and attaching the golden handles.
- Step 5: Insert Drawers into the Frame.
Carefully slide the assembled drawers onto the installed drawer slides within the main frame. Ensure they glide smoothly.
Figure 3: The nightstand with drawers open, demonstrating storage capacity.
- Step 6: Attach the Golden Legs.
Turn the assembled unit upside down. Attach the golden legs (M) to the designated corners of the bottom panel using the provided screws. Ensure they are firmly secured.
Figure 4: Detail of the golden legs providing stability and style.
Figure 5: The completed SoBuy FBT115-W nightstand.
5. Operating Instructions
The SoBuy FBT115-W nightstand is designed for convenient storage and display in your bedroom or living area.
- Drawers: Gently pull the golden handles to open the drawers. Push them back in until they are fully closed. Avoid forcing the drawers if they feel stiff; check for obstructions.
- Top Surface: Use the top surface to place lamps, books, decorative items, or personal belongings. Ensure items do not exceed the maximum weight capacity of 25 kg (55 lbs).
Figure 6: The nightstand integrated into a living space, showcasing its versatility.
6. Maintenance
Proper care will extend the life and appearance of your nightstand.
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or damage to the material.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
- Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
- Fasteners: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
7. Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not slide smoothly. | Misaligned drawer slides, obstructions, loose screws. | Check alignment of drawer slides. Remove any obstructions. Tighten all screws on slides and drawer components. |
| Table feels wobbly. | Loose fasteners, uneven floor. | Ensure all assembly screws are fully tightened. Adjust the golden legs if possible, or place shims under the legs on an uneven floor. |
| Missing parts. | Packaging error. | Do not proceed with assembly. Contact SoBuy customer support with your purchase details. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | SoBuy |
| Model Number | FBT115-W |
| Color | White |
| Dimensions (L x W x H) | 40 cm x 40 cm x 47 cm (15.7 x 15.7 x 18.5 inches) |
| Weight | 12.5 kg (27.5 lbs) |
| Material | PB (E1), MDF, Metal |
| Maximum Load Capacity | 25 kg (55 lbs) |
| Number of Drawers | 2 |
| Assembly Required | Yes |
Figure 7: Detailed dimensions of the nightstand.
9. Warranty & Support
SoBuy products are manufactured with quality and care. For warranty information, missing parts, or technical support, please contact SoBuy customer service directly. Please have your purchase receipt and model number (FBT115-W) ready when contacting support.
You can visit the official SoBuy store for more information: SoBuy Official Store
