1. Introduction
This manual provides instructions for the VINABTY VR3 Replacement Remote Control. This remote is designed to function as a direct replacement for original VIZIO LED TV remotes, requiring no programming.
Image 1: Front view of the VINABTY VR3 Replacement Remote Control. It features a standard layout with power, input, channel, volume, and number buttons.
2. Compatibility
The VINABTY VR3 Replacement Remote Control is compatible with various VIZIO LED TV models. No programming is required; simply insert batteries and use.
Compatible VIZIO LED TV Models include:
- V022L FHDTV10A
- V032A
- VO22LFHDTV10A
- VO22LHDTV10A
- VO32A
- VO22L FHDTV10A
- V022L10A
- VO22LF
- VO42LFHDTV10A
- VOJ320F1A
- VOJ320F1AC
- VOJ320M
- VOJ370F1A
- VOJ370F
- VO32LFF
- VO32LFHDTV10A
- VO37L
- VO37LHDTV10A
- VO37L HDTV10A
- VO22L HDTV10A
3. Setup: Battery Installation
To begin using your remote control, you must install two AAA batteries (not included).
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image 2: Diagram showing the correct orientation for installing AAA batteries into the remote control's battery compartment.
The remote control is now ready for use with your compatible VIZIO LED TV. No additional programming is required.
4. Operating Instructions
The VINABTY VR3 remote control features a standard button layout for intuitive operation of your VIZIO LED TV.
- Power Button (●): Turns the TV on or off.
- Input/Source Buttons (TV, AV, COMP, HDMI): Selects the desired input source for your TV.
- Channel Buttons (CH ▲ / ▼): Changes the TV channel up or down.
- Volume Buttons (VOL ▲ / ▼): Adjusts the TV volume up or down.
- Mute Button: Mutes or unmutes the TV audio.
- Number Buttons (0-9): Directly enters channel numbers.
- Guide Button: Accesses the TV program guide.
- Last Button: Returns to the previously viewed channel.
Ensure there are no obstructions between the remote control and the TV's infrared receiver for optimal performance. The maximum effective range is approximately 33 feet (10 meters).
5. Maintenance
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries.
- Cleaning: Clean the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the remote's surface or internal components.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
6. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Remote is not working. |
|
| Remote range is poor. |
|
| Specific buttons are not responding. |
|
7. Specifications
| Brand | VINABTY |
| Model Name | VR3 |
| Connectivity Technology | Infrared |
| Controller Type | Button Control |
| Button Quantity | 30 |
| Maximum Range | 33 feet (10 meters) |
| Battery Type | 2 x AAA batteries |
| Item Weight | 1.9 ounces (approx. 54 grams) |
| Item Dimensions (L x W x H) | 5" x 1.9" x 0.5" (approx. 12.7cm x 4.8cm x 1.3cm) |
| Compatible Devices | Television (VIZIO LED TVs) |
| Special Feature | Ergonomic design |
| Color | Black |
8. Support
For further assistance or inquiries regarding your VINABTY VR3 Replacement Remote Control, please refer to the seller's contact information on your purchase platform.