Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Tribesigns 41-Inch Gold Entryway Table. Please read this manual thoroughly before assembly and use to ensure proper setup and longevity of your product. This console table is designed to add a modern and elegant touch to your living room, hallway, or entryway.
Safety Information
WARNING: This product requires assembly. Keep small parts away from children. Do not exceed the maximum weight limit of 66 pounds. Always ensure the product is properly assembled and stable before use.
- Ensure all components are present and undamaged before beginning assembly.
- Assemble on a soft, clean surface to prevent scratches.
- Do not overtighten screws, as this may damage the material.
- Periodically check all fasteners to ensure they remain tight.
- Keep children and pets away from the assembly area.
Package Contents
Before assembly, verify that all parts listed below are included in your package:
- Faux Marble Veneer Tabletop (1)
- Gold Metal Frame (1) - featuring three internal ring structures
- Faux Marble Veneer Base (1)
- Adjustable Desk Feet (4)
- Assembly Hardware Pack (Screws, Washers, Allen Wrench)
- Assembly Guide (This manual)
Image: All components of the Tribesigns 41-Inch Gold Entryway Table.
Assembly Instructions
Follow these steps carefully to assemble your entryway table. A screwdriver (not included) may be required in addition to the provided tools.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent damage. Refer to the 'Package Contents' section and the provided diagram to identify each part.
- Attach Adjustable Feet to Base: Screw the four adjustable desk feet into the pre-drilled holes on the underside of the faux marble base. Tighten them securely but do not overtighten.
- Connect Metal Frame to Base: Align the bottom of the gold metal frame with the top of the faux marble base. Secure the frame to the base using the provided screws and the Allen wrench. Ensure the frame is centered and stable.
- Attach Tabletop to Metal Frame: Carefully place the faux marble veneer tabletop onto the top of the gold metal frame. Align the pre-drilled holes on the underside of the tabletop with the holes on the top of the metal frame. Secure the tabletop using the remaining screws.
- Final Check: Once assembled, gently lift and move the table to its desired location. Ensure all connections are secure and the table is stable. Adjust the feet if necessary to level the table on uneven surfaces.
Image: Assembly in progress, showing the connection points of the frame and base.
Image: Fully assembled Tribesigns entryway table from a side angle.
Usage and Placement
The Tribesigns 41-Inch Gold Entryway Table is designed for indoor use and can serve multiple functions in various rooms:
- Entryway: Ideal for holding keys, mail, decorative items, or a small lamp to welcome guests.
- Living Room: Can be placed behind a sofa or against a wall to display decor, books, or serve as an additional surface.
- Hallway: Perfect for narrow spaces, offering a functional and aesthetic accent.
Ensure the table is placed on a flat, stable surface. Avoid placing excessively heavy items on the tabletop to prevent damage or instability. The maximum recommended weight is 66 pounds.
Image: The Tribesigns entryway table, showcasing its design and potential for decoration.
Image: The table in a living room, demonstrating its aesthetic appeal.
Maintenance and Care
To maintain the appearance and longevity of your Tribesigns entryway table, follow these care instructions:
- Cleaning: Wipe the faux marble veneer top and metal frame with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes, as these can damage the finish.
- Spills: Clean up spills immediately to prevent staining, especially on the faux marble surface, which is not stain resistant.
- Heat and Moisture: Avoid placing hot items directly on the tabletop. Use coasters or protective pads under drinks and hot dishes. Keep the table away from direct sunlight and excessive moisture.
- Moving: When moving the table, lift it rather than dragging it to prevent damage to the legs and floor.
Troubleshooting
If you encounter any issues with your Tribesigns entryway table, refer to the common solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Uneven floor; Loose fasteners | Adjust the leveling feet on the base. Tighten all assembly screws. |
| Scratches on surface | Sharp objects; Abrasive cleaning | Use soft cloths for cleaning. Avoid dragging items across the surface. Minor scratches may be concealed with furniture repair kits (not included). |
| Discoloration of metal frame | Exposure to harsh chemicals or prolonged direct sunlight | Avoid using harsh cleaners. Place the table away from direct, intense sunlight. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Tribesigns |
| Model Name | XK00238 |
| Product Dimensions (D x W x H) | 13.77"D x 41.33"W x 31.49"H |
| Item Weight | 40 Pounds |
| Maximum Weight Recommendation | 66 Pounds |
| Color | Faux Marble White & Gold |
| Table Design | Console Table |
| Top Material Type | Faux Marble Veneer (Engineered Wood) |
| Frame Material Type | Metal |
| Included Components | Assembly Guide, Installation Tool |
| Tools Recommended For Assembly | Screw Driver (not included) |
| Indoor Outdoor Usage | Indoor |
| Is Stain Resistant | No |
Warranty and Customer Support
Tribesigns offers 18 months quality assurance for this product. For any questions, concerns, or assistance with assembly or parts, please contact Tribesigns customer service. Please have your model number (XK00238) and purchase information ready when contacting support.
You can find contact information on the Tribesigns official website or through your original point of purchase.
