Introduction
This manual provides essential information for the proper use and care of your OMNIHIL High Speed USB 2.0 Cable. This 15-foot cable is specifically designed to be compatible with the Geeni Scope Camera Model: GN-CW037, ensuring reliable data transfer and charging capabilities.

Image: The OMNIHIL 15-foot USB 2.0 cable, coiled, next to its white product box featuring the OMNIHIL logo.
The cable features OVP (Over Voltage output Protection), OCP (Over Current output Protection), and SCP (Short Circuit output Protection) to ensure the safety and longevity of your connected devices.
Setup
Setting up your OMNIHIL USB 2.0 cable is straightforward. Follow these steps to connect your Geeni Scope Camera or other compatible devices:
- Identify Connectors: The cable has a standard USB Type-A connector on one end and a Micro-USB Type-B connector on the other.
- Connect to Power Source/Computer: Insert the standard USB Type-A end of the cable into a compatible USB port on a power adapter, computer, or USB hub.
- Connect to Device: Insert the Micro-USB Type-B end of the cable into the corresponding port on your Geeni Scope Camera (Model: GN-CW037) or other compatible device. Ensure the connector is inserted correctly to avoid damage.
- Verify Connection: Once connected, your device should indicate that it is charging or that a data connection has been established.

Image: A close-up view of the black USB cable, showing the standard USB Type-A connector on the right and the smaller Micro-USB Type-B connector on the left.
Operating
This OMNIHIL USB 2.0 cable facilitates two primary functions:
- Charging: When connected to a power source (e.g., wall adapter, power bank), the cable will deliver power to charge your compatible device. The charging speed will depend on the power source and the device's charging capabilities.
- Data Transfer: When connected to a computer, the cable enables high-speed data transfer between your device and the computer. This allows you to transfer photos, videos, and other files.

Image: An illustrative image showing people comfortably using a device connected by a long cable in a living room, demonstrating the convenience of extended cable length for various scenarios.
Maintenance
To ensure the longevity and optimal performance of your OMNIHIL USB 2.0 cable, please follow these maintenance guidelines:
- Handle with Care: Avoid sharp bends, kinks, or excessive pulling on the cable, especially near the connectors.
- Store Properly: When not in use, coil the cable loosely. Do not wrap it too tightly or tie it in knots.
- Keep Clean: If connectors become dirty, gently wipe them with a dry, lint-free cloth. Do not use liquids or abrasive cleaners.
- Avoid Extreme Conditions: Do not expose the cable to extreme temperatures, direct sunlight for prolonged periods, or moisture.

Image: The OMNIHIL USB 2.0 cable neatly coiled, positioned in front of its product box, illustrating proper storage.
Troubleshooting
If you encounter issues with your OMNIHIL USB 2.0 cable, consider the following common solutions:
- Device Not Charging/Connecting:
- Ensure both ends of the cable are fully and securely inserted into their respective ports.
- Try connecting the cable to a different USB port or power source.
- Test the cable with another compatible device to determine if the issue is with the cable or the device.
- Check if the device's charging port is clean and free of debris.
- Slow Data Transfer:
- Ensure your computer's USB port supports USB 2.0 speeds or higher.
- Avoid using long USB extension cables, which can sometimes degrade signal quality.
- Close unnecessary applications on your computer and device during transfer.
- Physical Damage:
- Inspect the cable and connectors for any visible signs of damage, such as frayed wires or bent pins. If damaged, discontinue use.
Specifications
| Feature | Detail |
|---|---|
| Product Name | OMNIHIL High Speed USB 2.0 Cable |
| Model Number | OMNI0210023014 |
| Cable Length | 15 Feet (approx. 4.57 meters) |
| USB Standard | USB 2.0 High Speed |
| Connector Type | USB Type-A to Micro-USB Type-B |
| Compatible Devices | Geeni Scope Camera Model: GN-CW037, and other compatible devices requiring USB Type-A to Micro-USB Type-B connection. |
| Protection Features | OVP (Over Voltage output Protection), OCP (Over Current output Protection), SCP (Short Circuit output Protection) |
| Product Dimensions | 3 x 2 x 3 inches (packaging); 4.96 ounces |
| Manufacturer | Zhongshan Master Light Source Electronic |
| Date First Available | February 10, 2023 |
Warranty and Support
OMNIHIL stands behind the quality of its products. This USB 2.0 cable comes with a 5-Year Free Replacement Warranty.
For warranty claims, technical support, or any inquiries regarding your OMNIHIL product, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase for warranty services.
For more information, you may visit the OMNIHIL Store on Amazon.