Fastrack Streetwear NS38065PP02 Analog-Digital Watch User Manual

1. Introduction

This manual provides comprehensive instructions for the proper use and care of your Fastrack Streetwear NS38065PP02 Analog-Digital Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

2. Product Overview

The Fastrack Streetwear NS38065PP02 is an analog-digital hybrid watch designed for versatility and durability. It features both traditional analog hands for timekeeping and a digital display for additional functions such as day, date, and stopwatch.

2.1 Watch Components

• Analog Display: Hour, minute, and second hands.
• Digital Display: Shows time, date, day, and other digital functions.
• Crown: Used for setting analog time.
• Pushers (Buttons): Used for operating digital functions (Mode, Reset, Start/Stop, Light).
• Case: Robust grey plastic casing.
• Strap: Durable grey plastic strap with buckle clasp.

2.2 Key Features

• Analog-Digital Time Display
• Day and Date Display
• Chronograph (Stopwatch) Function
• Alarm Function
• Backlight for Digital Display
• Water Resistance up to 100 Metres

Image 1: Front view of the Fastrack Streetwear NS38065PP02 watch, showcasing its grey analog-digital dial and plastic strap.

Image 2: Side view of the watch, highlighting the crown and multiple pushers for digital function control.

3. Setup

3.1 Setting Analog Time

1. Pull the crown (located on the right side of the watch) out to the first position.
2. Rotate the crown to move the hour and minute hands to the desired time.
3. Push the crown back in to its normal position to start the analog timekeeping.

3.2 Setting Digital Time and Date

The digital display features multiple modes. Use the MODE button (typically bottom-left) to cycle through modes: Timekeeping, Chronograph, Alarm, and Date.

1. In Timekeeping mode, press and hold the RESET button (typically top-left) until the seconds begin to flash. This indicates setting mode.
2. Press the MODE button to cycle through the settings: seconds, hours, minutes, year, month, day.
3. Use the ST/STP button (typically top-right) to adjust the flashing value.
4. Once all settings are correct, press the RESET button again to exit setting mode.

4. Operating Instructions

4.1 Digital Modes

Press the MODE button to switch between the following functions:

• Timekeeping Mode: Displays current digital time, day, and date.
• Chronograph Mode: For measuring elapsed time.
• Alarm Mode: To set and activate an alarm.

4.2 Using the Chronograph (Stopwatch)

1. Press the MODE button until you reach Chronograph mode. The digital display will show '00:00:00'.
2. Press the ST/STP button to start the stopwatch.
3. Press ST/STP again to pause the stopwatch.
4. Press the RESET button to reset the stopwatch to zero.

4.3 Setting and Using the Alarm

1. Press the MODE button until you reach Alarm mode.
2. Press and hold the RESET button until the alarm hours begin to flash.
3. Use the ST/STP button to adjust the hours.
4. Press the MODE button to switch to minutes, then use ST/STP to adjust.
5. Press RESET to confirm the alarm time.
6. To turn the alarm ON/OFF, press the ST/STP button while in Alarm mode (without holding RESET). An alarm icon will appear/disappear.

4.4 Backlight Function

Press the LIGHT button (typically bottom-right) to illuminate the digital display for a few seconds, improving visibility in low-light conditions.

Image 3: Angled view of the watch, highlighting the digital display with time and date information.

5. Maintenance

5.1 Cleaning Your Watch

• Wipe the watch case and strap regularly with a soft, dry cloth.
• For stubborn dirt, use a slightly damp cloth and mild soap, then wipe dry immediately.
• Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish and seals.

5.2 Battery Replacement

The watch is powered by 1 Lithium Polymer battery (included). When the digital display becomes dim or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by an authorized service center to ensure proper sealing and maintain water resistance.

5.3 Water Resistance

This watch is water resistant up to 100 meters (10 ATM). This means it is suitable for swimming and snorkeling, but not for high-impact water sports or diving.

• Do not operate the crown or pushers when the watch is wet or submerged in water.
• Avoid exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the water-resistant seals.
• After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.

Image 4: Back view of the watch, displaying the stainless steel case back with Fastrack branding and model information.

6. Troubleshooting

• Digital Display Not Working: If the digital screen is blank or not functioning, check the battery. A low battery can affect digital functions before analog. Consider professional battery replacement.
• Incorrect Time/Date: Refer to Section 3 for instructions on setting analog and digital time/date. Ensure the crown is fully pushed in after setting analog time.
• Buttons Not Responding: Ensure the watch is dry. If buttons are stuck or unresponsive, do not force them. Seek assistance from an authorized service center.
• Water Inside Watch: If you notice condensation or water droplets inside the watch, immediately take it to an authorized service center. Do not attempt to open the watch yourself.

7. Specifications

8. Warranty & Support

8.1 Warranty Policy

Your Fastrack Streetwear NS38065PP02 watch comes with a 12-month manufacturer warranty covering manufacturing defects. To avail warranty services, you must present your original purchase invoice at any authorized Titan Service Center.

Note: A physical warranty card is not required; the invoice serves as proof of purchase for warranty claims.

8.2 Customer Support

For any service-related queries, warranty claims, or additional assistance, please contact Fastrack/Titan customer support:

• Toll-Free Number: 1800-266-0123 (Available daily, 10:00 AM to 7:00 PM)
• Email: customercare@titan.co.in

Manufacturer: Titan Company Limited, Sipcot Industrial Complex, Hosur, Tamil Nadu - 635129, India.