ROBOTIME Mini Cafe Store DIY Miniature House Building Kit Instruction Manual

1. Introduction

This instruction manual provides detailed guidance for assembling and maintaining your ROBOTIME Mini Cafe Store DIY Miniature House Building Kit. This kit allows you to construct a miniature cafe with realistic accessories and furniture, designed for an engaging building experience.

The Mini Cafe Store is part of the Super Store Series, offering modular design capabilities to combine with other sets. It features intricate details and includes LED lighting for an enhanced display.

Figure 1.1: The fully assembled ROBOTIME Mini Cafe Store.

2. Setup and Assembly

The ROBOTIME Mini Cafe Store is designed for straightforward assembly, typically taking approximately 45 minutes. The components are made from high-quality ABS and PVC materials, primarily featuring snap-together parts. No coloring or glue is required for most steps, simplifying the building process.

2.1 Required Tools (Not Included)

• Scissors (sharp ones recommended for cutting tissue paper, if applicable)
• 2 x AAA Batteries (for LED lighting)

2.2 Assembly Steps

1. Unpack all components and verify against the parts list in your included manual.
2. Follow the step-by-step visual instructions provided in the manual. Components are designed to snap together or use pre-applied adhesive spots.
3. Pay close attention to the orientation of parts as indicated in the diagrams.
4. Install the LED lighting components as directed. Ensure batteries are inserted correctly (refer to Section 3 for details).
5. Once assembled, ensure all parts are securely connected.

Figure 2.1: Assembly in progress, showing hands and instruction manual.

Figure 2.2: Collaborative assembly of the miniature cafe.

2.3 Modular Combination

This kit can be combined with other ROBOTIME Super Store Houses to create larger, custom layouts such as L-shaped, I-shaped, or matrix configurations. Additional roofs and dust shields are sold separately.

Figure 2.3: Examples of combining multiple Super Store Houses.

3. Operating the LED Lights

The Mini Cafe Store includes LED lighting to illuminate the interior. To operate the lights:

1. Ensure 2 x AAA batteries are correctly installed in the designated battery compartment. Observe polarity (+/-).
2. Locate the power switch, typically integrated with the battery housing or a connected wire.
3. Toggle the switch to turn the LED lights on or off.

Figure 3.1: The assembled cafe with LED lights activated.

4. Maintenance

To ensure the longevity and appearance of your miniature cafe, follow these maintenance guidelines:

• Cleaning: Gently dust the model regularly with a soft brush or a dry cloth to prevent dust accumulation. Avoid using liquid cleaners directly on the model.
• Storage: Store the model in a dry, cool place away from direct sunlight to prevent material degradation or fading. Consider purchasing a separate dust shield for protection.
• Handling: Handle the assembled model with care to avoid dislodging small components.

5. Troubleshooting

• Pieces do not fit: Double-check the instruction manual to ensure the correct pieces are being used and that they are oriented correctly. Some pieces may require gentle but firm pressure to snap into place.
• LED lights not working:
  • Verify that 2 x AAA batteries are installed and correctly oriented (+/-).
  • Ensure the battery compartment cover is securely closed.
  • Check the wiring connections to the LED lights to ensure they are properly seated.
  • Replace batteries with new ones if they are old or depleted.
• Small parts are loose: If any small decorative parts become loose, they can often be reattached using a small amount of craft glue (not included).

6. Specifications

Figure 6.1: Product dimensions for the Mini Cafe Store.

7. Warranty and Support

For information regarding product warranty, returns, or customer support, please refer to the retailer's purchase policy or contact ROBOTIME directly through their official website. Keep your proof of purchase for any warranty claims.