Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your SENMO Stylus Pen P6WP-KC. Please read this manual thoroughly to ensure proper use and to maximize your product experience.
Image: The SENMO Stylus Pen P6WP-KC in black, accompanied by several replacement nibs, against a colorful background.
Compatibility
The SENMO Stylus Pen P6WP-KC is designed to work with specific iPad models released from 2018 onwards. It operates without a Bluetooth connection.
Compatible Models:
- iPad Pro 11-inch (M4, 4th, 3rd, 2nd, 1st generation)
- iPad Pro 12.9-inch (6th, 5th, 4th, 3rd generation)
- iPad Pro 13-inch (M4)
- iPad mini (6th, 5th generation)
- iPad Air (M2, 5th, 4th, 3rd generation)
- iPad (10th, 9th, 8th, 7th, 6th generation)
Important: Please verify your iPad model number before use. The model number is typically found on the back of your iPad.
Image: Detailed compatibility chart showing supported iPad Pro, iPad Air, iPad Mini, and standard iPad models with their corresponding model numbers. It also lists incompatible older iPad models.
Image: Illustration demonstrating where to find the model number on the back of an iPad to confirm compatibility.
Setup
1. Initial Power On
To turn on the stylus pen, double-click the top button. The pen does not require Bluetooth pairing for operation.
Image: Visual guide showing a finger double-tapping the top of the stylus pen to power it on, with a note indicating no Bluetooth connection is needed.
2. Charging the Stylus Pen
The stylus pen features fast charging. A full charge takes approximately 15 minutes and provides over 10 hours of working time. The pen also has LED indicators to show battery life and charging status. It will automatically enter sleep mode after 5 minutes of inactivity to conserve battery.
Use the provided Type-C cable to charge the pen.
Image: Comparison graphic illustrating the SENMO stylus pen charging fully in 15 minutes versus other pens taking over 90 minutes, highlighting its fast charging capability and long standby time.
Operation
1. Palm Rejection
The stylus pen supports palm rejection technology, allowing you to rest your hand naturally on the iPad screen without creating unintended marks or interference while writing or drawing.
Image: A user demonstrating palm rejection, with their hand resting on the iPad screen while using the stylus, showing no unwanted strokes.
2. Tilt Sensitivity
The pen is equipped with a tilt sensitivity sensor. By adjusting the angle at which you hold the pen, you can vary the thickness of your lines, making it suitable for drawing, sketching, and marking.
Image: Graphic illustrating how different tilt angles of the stylus pen produce varying line thicknesses on the iPad screen.
3. Magnetic Attachment
The stylus pen features magnetic adsorption, allowing it to attach conveniently to the side of your compatible iPad. This helps prevent loss and keeps the pen easily accessible. Note that magnetic attachment does not charge the pen.
Image: The stylus pen magnetically attached to the side of an iPad, demonstrating its secure and convenient storage.
4. General Usage
The SENMO Stylus Pen provides a smooth and precise writing experience for various tasks, including:
- Drawing and sketching
- Note-taking
- Document annotation
- General navigation
Image: A collage of four scenes depicting the stylus pen being used for drawing, drafting, playing a game, and taking notes on an iPad.
Maintenance
1. Replacing the Pen Nib
The stylus pen comes with replacement nibs. If the pen tip becomes worn, gently twist the old nib counter-clockwise to remove it, then twist a new nib clockwise until secure. This ensures continued precision and responsiveness.
Image: Diagram illustrating the replacement nib design, showing how to remove and install a new nib for 0.1mm pixel precision.
2. Cleaning
Wipe the stylus pen with a soft, dry cloth to keep it clean. Avoid using harsh chemicals or abrasive materials.
Troubleshooting
If the Stylus Pen is Not Working:
Since this stylus pen does not use Bluetooth, ensure your iPad's Bluetooth is turned off and any previously paired Apple Pencils are disconnected.
- Turn Off iPad Bluetooth:
- Go to Settings > Bluetooth.
- Toggle the Bluetooth switch to the Off position.
- Forget Apple Pencil (if previously paired):
- Go to Settings > Bluetooth.
- Locate "Apple Pencil" in the list of devices.
- Tap the information icon (i) next to "Apple Pencil".
- Select Forget This Device.
After performing these steps, double-click the top button of your SENMO Stylus Pen to turn it on and begin use.
Image: Step-by-step visual instructions for troubleshooting, including turning off Bluetooth and forgetting any previously paired Apple Pencil on the iPad.
Specifications
| Model Number | P6WP-KC |
| Brand | SENMO |
| Dimensions (L x W x H) | 3.94 x 0.79 x 0.79 inches |
| Item Weight | 2.46 ounces (0.07 Kilograms) |
| Material | Plastic |
| Battery Type | 1 Lithium Polymer battery (included) |
| Charging Time | Approx. 15 minutes for full charge |
| Working Time | 10+ hours |
| Auto Sleep | 5 minutes of inactivity |
| Standby Time | Up to 360 days |
What's Included
Upon opening your product package, you will find the following items:
- 1 x SENMO Stylus Pen
- 1 x User Manual (this document)
- 1 x Type-C Charging Cable
- 4 x Replaceable Nibs
Image: A visual representation of the items included in the SENMO Stylus Pen package: the stylus pen, user manual, Type-C charging cable, and four replacement nibs.
Support and Warranty
For any questions or issues regarding your SENMO Stylus Pen, please contact our support team. We offer reliable 24-hour response service. When contacting support, please provide your order number for efficient assistance.
Contact information can typically be found on the product packaging or through your purchase platform.