Bruder 03785

Bruder MAN TGS Winter Service Truck Model 03785 Instruction Manual

Brand: Bruder | Model: 03785

1. Introduction

Welcome to the instruction manual for your Bruder MAN TGS Winter Service Truck, Model 03785. This highly detailed toy model is designed for realistic play, featuring a functional clearing blade and a working spreader. This manual provides essential information for understanding the product, assembly, operation, and care to ensure long-lasting enjoyment.

2. Safety Information

Important Safety Notice:

  • Not suitable for children under 36 months due to small parts.
  • Choking hazard.
  • Adult supervision is recommended during play.

3. Product Features

The Bruder MAN TGS Winter Service Truck Model 03785 includes the following key features:

  • MAN TGS winter service vehicle with clearing shield, suitable for indoor and outdoor play.
  • Cabin doors open, providing access for bworld figures (figures sold separately).
  • Cabin windows made of transparent, shatter-proof plastic.
  • Foldable wing mirrors.
  • Removable and height-adjustable wide clearing plate.
  • Fully functional spreader with screw conveyor, switchable on/off via a lever.
  • Foldable ladder for accessing the spreader unit.
  • Fillable tank for spreader material.

4. Setup

4.1 Attaching the Clearing Blade

  1. Locate the clearing blade and the attachment points on the front of the truck.
  2. Align the blade's connectors with the truck's front coupling mechanism.
  3. Securely attach the blade by pushing it firmly until it clicks into place.
Bruder MAN TGS Winter Service Truck with clearing blade detached, showing the front attachment points.

Image 4.1: The clearing blade detached from the truck, highlighting the connection points.

Bruder MAN TGS Winter Service Truck with clearing blade securely attached to the front.

Image 4.2: The Bruder MAN TGS Winter Service Truck with the clearing blade correctly attached.

4.2 Preparing the Spreader

  1. Open the top cover of the spreader unit located at the rear of the truck.
  2. The tank can be filled with suitable play material (e.g., fine sand or small beads). Do not use actual salt or corrosive materials.
  3. Close the cover securely after filling to prevent spillage.
Top-down view of the Bruder MAN TGS Winter Service Truck with the spreader tank cover open, ready for filling.

Image 4.3: The spreader unit with its top cover open, showing the fillable tank.

5. Operating Instructions

5.1 Cabin Access and Features

  • The doors of the MAN TGS cabin can be opened to place bworld figures inside for enhanced play.
  • The wing mirrors can be folded in for navigating narrow spaces or for storage.

5.2 Clearing Blade Operation

  • The clearing blade can be adjusted in height. Gently lift or lower the blade to the desired position for clearing obstacles.
  • The blade is also removable, allowing for different play scenarios where a clearing function is not needed.

5.3 Spreader Function

  1. Locate the lever on the side of the spreader unit.
  2. Move the lever to the "ON" position to activate the screw conveyor, which will dispense material from the tank.
  3. Move the lever to the "OFF" position to stop the dispensing.
  4. The entire spreader unit with the conveyor can be rotated 180 degrees to change the direction of material spreading.
Rear view of the Bruder MAN TGS Winter Service Truck, showing the spreader unit, ladder, and fillable tank.

Image 5.1: Rear view of the truck, illustrating the spreader unit and its components.

Close-up rear view of the Bruder MAN TGS Winter Service Truck, detailing the spreader mechanism and control lever.

Image 5.2: Detailed view of the spreader mechanism, including the lever for activation.

6. Maintenance

  • Cleaning: Wipe the toy with a damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic.
  • Storage: Store the toy in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation and discoloration.
  • Inspection: Periodically inspect the toy for any loose, broken, or damaged parts. If any damage is found, discontinue use until repaired or replaced.

7. Troubleshooting

  • Clearing Blade Not Attaching Securely: Ensure the connectors on the blade and truck are properly aligned. Push the blade firmly into place until you hear or feel a click. Check for any obstructions preventing a secure connection.
  • Spreader Not Dispensing Material:
    • Verify that the spreader tank is filled with appropriate play material.
    • Ensure the control lever on the spreader unit is in the "ON" position.
    • Check for any blockages in the screw conveyor mechanism. Gently clear any obstructions if safe to do so.

8. Specifications

  • Brand: Bruder
  • Model Number: 03785
  • Product Dimensions: 7.87 x 25.79 x 10.04 inches (20 x 65.5 x 25.5 cm)
  • Item Weight: 3.88 ounces (110 grams)
  • Recommended Age: 4 years and up
  • Material: High-quality plastics (e.g., ABS)
  • Scale: 1:16
  • Release Date: February 8, 2023

9. Warranty and Support

No specific warranty or detailed support information is provided within this product manual. For inquiries regarding product defects, replacement parts, or general support, please contact the retailer from whom you purchased the product or refer to the official Bruder website for manufacturer contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.