Outvita 23.6in Bronze Cast Aluminum Bistro Side Table with Umbrella Hole

1. Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Caution: Adjustable foot pads may create pinch points. Exercise care during adjustment.
• The maximum weight capacity for this table is 111 lbs (50 kg). Do not exceed this limit.
• Proper installation is required to ensure stability and prevent tipping. Ensure all fasteners are securely tightened.
• This table is designed for outdoor use.
• When using an umbrella, ensure it is properly secured with a matching patio umbrella base (not included). The table's umbrella hole is for accommodation only and does not provide primary stability for the umbrella.

2. Product Overview

The Outvita Round-Brown Bistro Side Table is crafted from high-quality cast aluminum, designed for durability and weather resistance in outdoor environments. It features an elegant antique design with a hollow-carved pattern and a bronze finish.

Key Features:

• Premium Cast Aluminum: Ensures durability, weather resistance, and rust-proof performance.
• Elegant Antique Design: Features a decorative hollow-carved pattern and vintage brown paint.
• Functional Umbrella Hole: A 2-inch diameter hole accommodates various patio umbrellas (umbrella not included).
• Adjustable Foot Pads: Enhances stability on uneven surfaces and protects flooring.
• Versatile Use: Suitable for patios, balconies, porches, poolside areas, gardens, or backyards.

Figure 2.1: Assembled Outvita Round-Brown Bistro Side Table.

3. Package Contents

Please check to ensure all parts are present before beginning assembly. If any parts are missing or damaged, contact customer service.

• Tabletop (1)
• Legs (3 or 4, depending on design)
• Support Ring/Brace (1)
• Hardware Pack (screws, washers, adjustable foot pads)
• Assembly Tool (e.g., Allen wrench)

Figure 3.1: Product dimensions (23.6" diameter, 20.7" height) and weight capacity (220 lbs) of the table.

4. Assembly Instructions

Assembly is straightforward. It is recommended to assemble the table on a soft, clean surface to prevent scratches. Do not overtighten screws until all parts are aligned.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts are present against the package contents list.
2. Attach Legs to Tabletop: Align the legs with the mounting points on the underside of the tabletop. Secure each leg using the provided screws and washers. Hand-tighten initially.
3. Attach Support Ring/Brace: Connect the support ring or brace to the lower section of the legs. Ensure the umbrella hole component (if separate) is correctly oriented. Secure with screws and washers, hand-tightening.
4. Final Tightening: Once all components are loosely assembled and aligned, gradually tighten all screws with the provided tool until secure. Do not overtighten.
5. Attach Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of each leg.
6. Position Table: Carefully place the table in its desired location. Adjust the foot pads as needed to ensure the table is level and stable.

Figure 4.1: Close-up of robust construction, stainless steel screws, and adjustable foot pads for stability.

5. Operation and Usage

This bistro side table is designed for various outdoor leisure activities.

• General Use: Use as a coffee table, side table, or plant stand on your patio, balcony, porch, or garden.
• Umbrella Integration: The central 2-inch hole is designed to accommodate a patio umbrella pole. Ensure the umbrella is supported by a separate, stable umbrella base (not included) to prevent tipping, especially in windy conditions.

Figure 5.1: Detail of the 2-inch diameter umbrella hole.

6. Maintenance

To ensure the longevity and appearance of your Outvita bistro table, follow these simple maintenance guidelines:

• Cleaning: Wipe the table with a dry or damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly. Avoid harsh chemicals or abrasive cleaners.
• Rust Prevention: The cast aluminum is rust-resistant. However, regular cleaning and ensuring the table is dry after rain will help maintain its finish.
• Winter Storage: In areas with harsh winters, it is recommended to store the table indoors or cover it with a protective outdoor furniture cover to extend its lifespan.
• Check Fasteners: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.

Figure 6.1: The elegant hollow-carved pattern on the tabletop, which is easy to clean.

7. Troubleshooting

If you encounter any issues with your table, refer to the following common solutions:

• Table is Wobbly:
  • Ensure all screws are securely tightened.
  • Adjust the foot pads on the bottom of the legs to level the table on uneven surfaces.
• Difficulty Assembling:
  • Review the assembly instructions carefully.
  • Do not fully tighten screws until all parts are loosely connected and aligned.
  • Ensure you are using the correct hardware for each step.
• Umbrella Not Stable:
  • The table's umbrella hole is for placement only. A separate, heavy-duty umbrella base is required to provide stability for your patio umbrella.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the retailer's policy or contact Outvita customer service directly through their official website or the platform where the product was purchased. Keep your purchase receipt as proof of purchase.

We are committed to providing high-quality products and support. If you have any questions or concerns, please do not hesitate to reach out.