1. Introduction
The TP-Link VIGI NVR1104H-4P is a 4-channel Network Video Recorder designed for professional surveillance systems. It features Power over Ethernet (PoE+) ports for simplified camera connection and power, H.265+ video compression for efficient storage, and ONVIF compliance for broad compatibility. This manual provides essential information for setting up, operating, and maintaining your NVR to ensure reliable performance of your security system.
Image 1.1: Front view of the TP-Link VIGI NVR1104H-4P.
2. Product Overview
2.1 Key Features
- 4K HDMI Video Output: Supports up to 8MP clear image quality and 4 channels display.
- PoE+ Power Supply: Connect and power PoE compatible cameras with a single RJ45 cable.
- Easy HDD Installation: Hard drive can be manually installed and removed from the side.
- 4 Channels Simultaneous Playback: Supports simultaneous playback from up to 4 cameras.
- H.265+ Data Compression: Efficiently compresses video files to save storage and bandwidth without quality loss.
- ONVIF Compliant: Ensures compatibility with ONVIF standard cameras.
- Plug & Play: New VIGI IP cameras are automatically added and activated.
- 24 Hours Continuous Recording: Supports continuous video storage up to 10TB.
- Remote Monitoring: Accessible via VIGI App, Web UI, and VIGI Security Manager.
- Built-in Speaker: Provides real-time audio output without external peripherals.
Image 2.1: Visual representation of the NVR's key features.
2.2 Physical Interface
Familiarize yourself with the ports and indicators on your NVR.
Image 2.2: Rear panel of the NVR showing various ports.
- PoE Ports (1-4): Four Power over Ethernet ports to connect and power your VIGI PoE cameras.
- LAN Port: For Ethernet connection to your network.
- USB Ports (USB 1, USB 2): Two USB 2.0 ports for connecting a mouse, keyboard, or external hard disk.
- AUDIO IN / AUDIO OUT: Ports for two-way audio communication.
- HDMI / VGA Ports: Video output ports for connecting a monitor.
- Power Supply: Input for the NVR's power adapter.
3. Setup
3.1 Hard Disk Drive (HDD) Installation
The NVR requires a 3.5-inch SATA HDD for video storage (not included). Ensure the NVR is powered off before installation.
- Unscrew the side panel of the NVR.
- Connect the SATA data and power cables from the NVR to the HDD.
- Secure the HDD within the NVR chassis using the provided screws.
- Reattach the side panel.
3.2 Connecting Cameras and Network
Connect your VIGI PoE cameras directly to the NVR's PoE ports. For network access and remote monitoring, connect the NVR's LAN port to your router or network switch.
Image 3.1: Diagram illustrating simplified deployment with PoE+ cameras connected to the NVR.
3.3 Initial Power-On and Configuration
- Connect a monitor to the NVR's HDMI or VGA port.
- Connect a USB mouse to one of the NVR's USB ports.
- Connect the power adapter to the NVR and a power outlet. The NVR will power on automatically.
- Follow the on-screen wizard to set up basic parameters, including language, time zone, network settings, and administrator password.
- The NVR will automatically detect and add connected VIGI PoE cameras.
4. Operating Instructions
4.1 Live View
After initial setup, the NVR will display the live feed from connected cameras on the monitor. You can switch between single-camera view and multi-camera grid views.
Image 4.1: Example of 4K HDMI video output displaying multiple camera feeds.
4.2 Recording
The NVR supports continuous recording, scheduled recording, and event-triggered recording (e.g., motion detection). Recording settings can be configured via the NVR's local interface or remote access.
- Continuous Recording: Records 24/7, overwriting older footage when the HDD is full.
- Event Recording: Records only when specific events (like motion detection) are triggered, saving storage space.
4.3 Playback
Access recorded footage for review. The NVR supports simultaneous playback of up to 4 channels.
Image 4.2: Timeline view for 4-channel simultaneous playback.
- Navigate to the 'Playback' menu on the NVR interface.
- Select the desired cameras and date/time range.
- Use the timeline to locate specific events or periods.
4.4 Remote Monitoring
Monitor your surveillance system remotely using the VIGI App, Web UI, or VIGI Security Manager software.
- VIGI App: Download the TP-Link VIGI app from your mobile app store for convenient access on smartphones and tablets.
- Web UI: Access the NVR's web interface via a web browser on your computer by entering the NVR's IP address.
- VIGI Security Manager: Install the VIGI Security Manager software on your computer for advanced management and monitoring.
4.5 Audio Features
The built-in speaker allows for real-time audio output. If your cameras support audio input, you can also utilize two-way audio through the NVR's AUDIO IN/OUT ports.
5. Maintenance
5.1 Hard Disk Drive Management
Regularly check the status of your HDD through the NVR's system settings. If the HDD fails or reaches its capacity, you may need to replace it. The NVR supports up to 10TB capacity.
5.2 Firmware Updates
Periodically check the TP-Link VIGI website for firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.
5.3 Cleaning
Use a soft, dry cloth to clean the exterior of the NVR. Do not use liquid or aerosol cleaners. Ensure ventilation openings are clear of dust and obstructions.
6. Troubleshooting
This section addresses common issues you might encounter with your NVR.
| Problem | Possible Cause | Solution |
|---|---|---|
| No video display on monitor. | Incorrect cable connection, monitor input not selected, NVR not powered on. | Check HDMI/VGA cable connections. Ensure monitor is on and correct input is selected. Verify NVR power. |
| Cameras not detected. | PoE cable issue, camera power issue, network conflict, camera not ONVIF compliant. | Check PoE cable connections. Ensure cameras are powered. Verify camera compatibility (ONVIF). Restart NVR and cameras. |
| HDD not recording or detected. | HDD not installed correctly, faulty HDD, HDD not initialized. | Ensure HDD is securely connected. Check HDD status in NVR settings; initialize or format if necessary. Replace faulty HDD. |
| Cannot access NVR remotely. | Network configuration issue, NVR not connected to internet, firewall blocking access. | Verify NVR's network connection. Check router settings for port forwarding or UPnP. Ensure VIGI App/software is correctly configured. |
7. Specifications
Below are the technical specifications for the TP-Link VIGI NVR1104H-4P.
- Model: NVR1104H-4P
- Manufacturer: TP-Link
- Number of Channels: 4
- Connectivity Technology: Ethernet
- Compatible Devices: Camera
- Video Output: 4K HDMI, VGA
- Video Compression: H.265+
- Hard Disk Size: Up to 10 TB (SATA)
- Item Weight: 1.37 Kilograms
- Product Dimensions: 50 x 50 x 28 cm
- Voltage: 28 Volts
- Wattage: 4.82 watts
- Included Components: NVR1104H-4P unit
8. Warranty and Support
For warranty information and technical support, please refer to the official TP-Link website or contact TP-Link customer service. Keep your purchase receipt for warranty claims.
- TP-Link Official Website: www.tp-link.com
- Support Page: Visit the support section on the TP-Link website for FAQs, firmware downloads, and contact information.