Introduction
This manual provides essential information for the safe and effective use of your BROMECH AC/DC Adapter. Please read this manual thoroughly before use and retain it for future reference.
This replacement charger is specifically designed for CAMRY and Bromech Scales purchased after the year 2021. Compatible models include: ACS-15-JE21, ACS-30-JE21, ACS-30-JC21G, ACS-30-JC81W, ACS-30-JE51, BCS30JE21, BCS30JC21G, BCS30JC81W, BCS30JE31.
Product Overview
Image: The BROMECH AC/DC Adapter, a black power supply unit with a two-prong plug and a DC output cable.
Image: Another view of the BROMECH AC/DC Adapter, showing the compact design and the attached cable with the DC plug.
The BROMECH AC/DC Adapter is a compact and reliable power supply designed to provide stable power to compatible Camry and Bromech commercial scales. It features a standard two-prong plug for AC input and a DC output connector.
Specifications
| Parameter | Value |
|---|---|
| Model Number | AC02BKAA |
| AC Input | 100-240V, 50/60Hz |
| DC Output | 6V, 500mA |
| Cable Length | 38.6 inches |
| Connector Type | DC 5.5mm x 3.3mm (2-Pin) |
| Color | Black |
| Item Weight | 2.08 ounces |
| Package Dimensions | 3.27 x 3.19 x 1.3 inches |
| Compatible Devices | CAMRY and Bromech commercial scales (purchased after 2021) |
Image: Diagram illustrating the product specifications, including input/output voltage and current, and model number HW0600500U (which is likely the internal model for the adapter component, while AC02BKAA is the product model number).
Image: Diagram showing the dimensions of the DC 5.5mm x 3.3mm interface, suitable for compatible equipment power supply.
Setup and Connection
- Verify Compatibility: Ensure your Camry or Bromech scale model is listed as compatible (ACS-15-JE21, ACS-30-JE21, ACS-30-JC21G, ACS-30-JC81W, ACS-30-JE51, BCS30JE21, BCS30JC21G, BCS30JC81W, BCS30JE31) and was purchased after the year 2021.
- Locate Power Port: Identify the DC power input port on your scale.
- Connect Adapter: Insert the DC output plug of the BROMECH AC/DC Adapter firmly into the scale's power input port.
- Plug into Outlet: Insert the two-prong plug of the adapter into a standard 100-240V AC wall outlet.
- Power On: Once connected, your scale should receive power. Refer to your scale's manual for specific power-on procedures.
Image: The BROMECH AC/DC Adapter plugged into a multi-outlet power strip, demonstrating a typical connection scenario.
Operating Instructions
The BROMECH AC/DC Adapter functions as a direct power supply for your compatible scale. It does not require any user configuration or software installation.
- Ensure the adapter is securely plugged into both the scale and the power outlet.
- The adapter provides a stable 6V DC output to power your device.
- Always disconnect the adapter from the power outlet when not in use for extended periods.
Safety and Maintenance
Safety Precautions:
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to open or repair the adapter. Refer servicing to qualified personnel.
- Ensure the power outlet is easily accessible for quick disconnection if needed.
- Keep out of reach of children.
- This adapter is designed for indoor use only.
Image: The BROMECH AC/DC Adapter with a "Certified Safe" icon, indicating its adherence to safety standards.
Image: A cutaway view of the adapter showing its internal circuitry, highlighting its multiple protection features for safer charging.
Cleaning:
Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scale not powering on. | Adapter not properly connected. | Ensure both ends of the adapter are securely plugged in. |
| Power outlet is not active. | Test the outlet with another device or try a different outlet. | |
| Scale model incompatibility. | Verify your scale model is listed as compatible and was purchased after 2021. | |
| Adapter feels warm. | Normal operation. | A slight warmth during operation is normal. If it becomes excessively hot or emits smoke/odor, disconnect immediately. |
Warranty and Support
For warranty information or technical support, please contact BROMECH customer service through the official BROMECH store on Amazon or visit their website. Keep your purchase receipt as proof of purchase.
BROMECH Store Link: https://www.amazon.com/stores/BROMECH/page/177EC1E0-7479-45AB-AC3D-7F4EE9BCF0E2