Cybex LEMO 2 3-in-1 High Chair Instruction Manual

Introduction

The Cybex LEMO 2 3-in-1 High Chair is designed to provide a versatile and adaptable seating solution that grows with your child. This manual provides essential information for the safe assembly, operation, and maintenance of your high chair, ensuring comfortable and secure use from 6 months up to 99 years (approximately 209 lbs).

Image: The Cybex LEMO 2 High Chair in its 3-in-1 configuration, including the baby set and snack tray, alongside a standalone chair and individual components.

Safety Information

Please read all instructions carefully before assembly and use. Failure to follow these instructions could result in serious injury or death. Keep this manual for future reference.

• Always secure your child with the harness system when using the Baby Set.
• Never leave your child unattended in the high chair.
• Ensure the high chair is placed on a flat, stable surface.
• Keep children away from the product during assembly and disassembly.
• Regularly check all components for wear, damage, or missing parts. Discontinue use if any part is damaged.
• Do not use accessories or replacement parts other than those approved by Cybex.
• The anti-tip wheels are designed for stability and portability; however, always exercise caution when moving the chair with a child in it.

Package Contents

The Cybex LEMO 2 3-in-1 High Chair set includes the following components:

• LEMO 2 Chair Frame (main chair structure)
• Baby Set (with harness)
• Snack Tray (dishwasher-safe)
• Assembly hardware (8 screws)

Note: The LEMO Bouncer Nest is sold separately and is not included in this 3-in-1 set.

Image: Visual representation of the Cybex LEMO 2 High Chair and its compatible accessories, including the Baby Set with harness, Snack Tray, and optional Bouncer Nest.

Assembly Instructions

The Cybex LEMO 2 High Chair is designed for quick and easy assembly. You will need to use the provided eight screws to secure the main frame components.

1. Unpack all components and verify against the package contents list.
2. Connect the main frame pieces as indicated in the diagram, ensuring proper alignment.
3. Insert and tighten the eight screws to secure the frame. Do not overtighten.
4. Once the main chair is assembled, attach the Baby Set by sliding it onto the chair's backrest and seat until it clicks securely into place.
5. Attach the Snack Tray by aligning it with the Baby Set's attachment points and pressing down until it locks.
6. Before first use, ensure all connections are secure and the chair is stable.

Image: Diagram illustrating the simple assembly process of the Cybex LEMO 2 High Chair, highlighting the use of eight screws.

Operating Instructions

Adjusting Seat Depth and Height

The LEMO 2 High Chair features effortless one-hand adjustment for both seat depth and height, allowing it to adapt to your child's growth and various table heights.

• To adjust the seat height: Locate the adjustment levers on the sides of the chair. Press the levers and slide the seat up or down to the desired position. Release the levers to lock the seat in place.
• To adjust the seat depth: Similarly, use the levers to slide the seat forward or backward to achieve optimal comfort and support for your child's legs.

Image: Illustration demonstrating the one-hand depth and height adjustment mechanism of the Cybex LEMO 2 High Chair.

Using the Baby Set and Snack Tray

For children from 6 months, the Baby Set and Snack Tray provide a secure and convenient feeding environment.

• Ensure the Baby Set is securely attached to the chair.
• Place your child in the Baby Set and fasten the harness system. Adjust straps for a snug fit.
• Attach the Snack Tray for mealtime. The tray is removable for easy cleaning.

Converting to an Adult Chair

As your child grows, the Baby Set and Snack Tray can be removed to transform the LEMO 2 into a standalone chair suitable for older children and adults (up to 209 lbs).

• To remove the Snack Tray: Press the release buttons on the sides of the tray and lift it off.
• To remove the Baby Set: Locate the release mechanisms (usually clips or buttons) and detach the Baby Set from the chair frame.
• Adjust the seat and footrest to a comfortable height and depth for the user.

Image: The Cybex LEMO 2 High Chair configured as a standard chair, without the baby set or snack tray, demonstrating its versatility for older children and adults.

Anti-Tip Wheels

The integrated anti-tip wheels provide stability and allow for easy movement of the chair without lifting. These wheels are located on the rear legs of the chair.

• To move the chair, slightly tilt it backward to engage the wheels.
• Always ensure the chair is stable and all four feet are on the ground when in use.

Image: Close-up view of the anti-tip wheels on the Cybex LEMO 2 High Chair, designed for enhanced stability and easy repositioning.

Maintenance and Cleaning

Regular cleaning and maintenance will prolong the life of your Cybex LEMO 2 High Chair.

• Chair Frame and Wooden Parts: Wipe clean with a damp cloth and mild soap. Dry immediately. Avoid abrasive cleaners.
• Snack Tray: The snack tray is dishwasher-safe for convenient cleaning. Alternatively, wash by hand with warm soapy water.
• Harness Straps: The straps can be removed for thorough cleaning. Hand wash with mild soap and water, then air dry completely before reattaching. Ensure straps are correctly reinstalled according to the assembly instructions.
• General Inspection: Periodically check all screws and connections to ensure they are tight and secure. Inspect for any signs of wear or damage.

Troubleshooting

If you encounter any issues with your Cybex LEMO 2 High Chair, please refer to the following common solutions:

Specifications

• Model: LEMO 2 3-in-1 High Chair
• Item Model Number: 521003587
• Product Dimensions: 22"D x 21.5"W x 32.1"H (55.9 cm D x 54.6 cm W x 81.5 cm H)
• Item Weight: 20.5 pounds (9.3 kg)
• Maximum Weight Recommendation: 209 pounds (95 kg)
• Material Composition: 60% Aluminum, 20% Beechwood, 15% Plastic, 4% Metal, 1% Silicone
• Age Suitability: From 6 months (with Baby Set and Snack Tray) up to 99 years (as an adult chair)
• Portability: Yes, with anti-tip wheels
• Batteries Required: No

Image: Dimensional drawing of the Cybex LEMO 2 High Chair, showing its height, width, and depth.

Warranty and Support

Cybex products are manufactured with the highest quality standards. For detailed warranty information, product registration, or to contact customer support, please visit the official Cybex website or refer to the warranty card included with your purchase.

You can also visit the Cybex Store on Amazon for additional product information and accessories.