KIIROO Keon Empty Case Instruction Manual

1. Product Overview

The KIIROO Keon Empty Case (Model E33712) is designed to integrate various male masturbator sleeves, including those from Fleshlight and other popular brands, with the KIIROO Keon and PowerBlow interactive devices. This case allows users to transform their preferred stroker sleeves into interactive experiences, enhancing online pleasure through partner products, interactive content, VR experiences, and webcam sessions. The package includes the empty stroker case and an attachment ring; no stroker sleeve is included.

Image: The KIIROO Keon Empty Case, a black cylindrical device designed to house compatible stroker sleeves.

2. Safety Information

WARNING:

• This product is intended for adult use only. Keep out of reach of children.
• Always use with caution and follow all instructions provided.
• This product is designed to be used with other sleeves, so proper cleaning is essential to prevent infections.
• This product may contain materials that could cause allergic reactions in some users.
• This product involves interactive online features, so be aware of potential data privacy concerns and online predators.
• Always use with care and follow all safety guidelines.

3. Setup

To prepare your KIIROO Keon Empty Case for use, follow these steps:

1. Unpack: Carefully remove the empty case and any included accessories (such as the attachment ring and drying implement) from its packaging.
2. Insert Sleeve: Select your desired compatible male masturbator sleeve. Gently insert the sleeve into the KIIROO Keon Empty Case. Ensure it is seated correctly and securely within the case.
3. Secure with Attachment Ring (if applicable): If your sleeve requires it, use the provided attachment ring to further secure the sleeve in place. This helps maintain stability during use.
4. Lubricate: Apply a generous amount of water-based lubricant to the entrance of the sleeve and to yourself for comfortable use. Avoid oil-based or silicone-based lubricants as they may degrade the sleeve material.

For visual guidance on compatible sleeves, refer to the video below:

4. Operating Instructions

Once your chosen sleeve is securely installed and lubricated, the KIIROO Keon Empty Case is ready for use. The case is designed to be used with KIIROO's interactive devices (Keon, PowerBlow) for an enhanced experience.

1. Connect to Interactive Device: Ensure your KIIROO Keon or PowerBlow device is powered on.
2. Adjust Suction (if applicable): The case may feature an adjustable vent cap. Unscrew or adjust this cap to control the level of desired suction.
3. Engage: Begin use. The interactive features will respond to compatible content or partner devices.

For interactive use with the FeelConnect App, follow these instructions:

5. Maintenance

Proper maintenance is crucial for the longevity and hygiene of your KIIROO Keon Empty Case and compatible sleeves.

1. Disassemble: After each use, carefully remove the stroker sleeve from the case.
2. Rinse: Clean the sleeve thoroughly with warm water. For a deeper clean, use a toy cleaner spray. Avoid using soaps or detergents that may damage the sleeve material.
3. Air Dry: Shake off excess water and allow the sleeve to air dry completely. Do not store the sleeve while wet. Ensure the drying implement (if provided) is used to allow airflow and prevent moisture buildup.
4. Renew: Once dry, apply Fleshlight Renewing Powder to the sleeve to maintain its soft, skin-like texture.
5. Case Cleaning: Wipe down the exterior and interior of the empty case with a damp cloth and mild soap if necessary. Ensure it is completely dry before reassembly.

6. Troubleshooting

• Sleeve does not fit: Ensure the sleeve you are attempting to insert is compatible with the KIIROO Keon Empty Case. Refer to the product description for compatible brands and sizes.
• Lack of Suction: Verify that the vent cap (if present) is properly adjusted. Tightening the cap typically increases suction, while loosening it decreases suction.
• Device not reacting to interactive content:
  • Ensure your KIIROO interactive device (Keon, PowerBlow) is powered on and fully charged.
  • Check your Bluetooth connection to the FeelConnect App.
  • Verify that the interactive content platform is properly synced with the FeelConnect App using the QR code method.
  • Ensure your internet connection is stable.
• Sleeve feels sticky or degraded: This often indicates improper cleaning or the use of incompatible lubricants. Always use water-based lubricants and clean thoroughly after each use. Apply renewing powder as directed.

7. Specifications

8. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact KIIROO customer service directly. Refer to the official KIIROO website or your purchase documentation for contact details.