OLIGHT SRPL-7

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

OLIGHT SRPL-7 Magnetic Remote Pressure Switch User Manual for PL-3R Valkyrie

Model: SRPL-7

1. Introduction

This manual provides detailed instructions for the proper installation, operation, and maintenance of the OLIGHT SRPL-7 Magnetic Remote Pressure Switch. This accessory is designed exclusively for use with the OLIGHT PL-3R Valkyrie weapon light. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Product Overview

The OLIGHT SRPL-7 is a magnetic remote pressure switch designed to provide convenient and reliable control over your PL-3R Valkyrie weapon light. It features a durable construction and a strong magnetic connection for secure attachment.

2.1 What's in the Box

  • SRPL-7 Magnetic Remote Switch x 1

2.2 Components

OLIGHT SRPL-7 Magnetic Remote Pressure Switch

Figure 1: The OLIGHT SRPL-7 Magnetic Remote Pressure Switch. This image displays the complete remote pressure switch unit, including the pressure pad and the magnetic connector.

3. Setup and Installation

Follow these steps to properly install the SRPL-7 Magnetic Remote Pressure Switch with your OLIGHT PL-3R Valkyrie.

  1. Ensure your PL-3R Valkyrie weapon light is securely mounted to your firearm or desired platform.
  2. Locate the magnetic charging port on the tail cap of the PL-3R Valkyrie.
  3. Align the magnetic connector of the SRPL-7 remote pressure switch with the charging port. The strong magnetic force will secure the connection.
  4. Route the cable of the pressure switch along your firearm to a comfortable and accessible position for activation. Use cable management accessories (not included) if necessary to prevent snagging.
  5. Secure the pressure pad in your desired location using the integrated mounting options or compatible accessories.
OLIGHT SRPL-7 installed on a firearm with PL-3R Valkyrie

Figure 2: An OLIGHT SRPL-7 Magnetic Remote Pressure Switch connected to a PL-3R Valkyrie weapon light, mounted on a firearm. This illustrates the typical installation of the switch for operational use.

Note: The SRPL-7 is designed exclusively for the PL-3R Valkyrie. Compatibility with other models is not guaranteed and may result in improper function or damage.

4. Operating Instructions

The SRPL-7 remote pressure switch provides intuitive control over your connected PL-3R Valkyrie weapon light.

  • Momentary Activation: Press and hold the pressure pad to activate the light. Release the pressure pad to turn the light off.
  • Constant On/Off: A firm, quick press and release of the pressure pad will toggle the light between constant on and off modes.

Refer to your PL-3R Valkyrie user manual for specific light modes and functions, as the pressure switch primarily acts as an external activator.

5. Maintenance

To ensure the longevity and reliable performance of your SRPL-7 Magnetic Remote Pressure Switch, follow these maintenance guidelines:

  • Cleaning: Wipe the switch and cable with a clean, damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive materials.
  • Magnetic Connector: Keep the magnetic connector free from metallic particles or obstructions to ensure a strong and consistent connection.
  • Storage: Store the switch in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage. If damage is observed, discontinue use and contact customer support.

6. Troubleshooting

If you encounter issues with your SRPL-7 Magnetic Remote Pressure Switch, refer to the following common solutions:

Problem Possible Cause Solution
Switch does not activate light.
  • Loose magnetic connection.
  • Incompatible light model.
  • PL-3R Valkyrie battery depleted.
  • Damaged switch or cable.
  • Ensure the magnetic connector is firmly attached to the PL-3R Valkyrie's tail cap.
  • Verify that the light is an OLIGHT PL-3R Valkyrie. This switch is not compatible with other models.
  • Charge or replace the battery in your PL-3R Valkyrie.
  • Inspect the switch and cable for visible damage. If damaged, contact customer support.
Intermittent activation.
  • Weak magnetic connection.
  • Dirt or debris on connector.
  • Re-seat the magnetic connector.
  • Clean the magnetic connector and the light's charging port.

7. Specifications

Feature Detail
Brand OLIGHT
Model SRPL-7
Compatibility OLIGHT PL-3R Valkyrie (ONLY)
Material TPU
Item Weight 1.44 ounces
Product Dimensions 7.05"D x 2.99"W x 1.18"H
Part Number O-SRPL7-BK#US-FBA

8. Warranty and Support

The OLIGHT SRPL-7 Magnetic Remote Pressure Switch comes with a limited warranty. For specific warranty terms and conditions, please refer to the official OLIGHT website or contact OLIGHT customer service.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official OLIGHT website or contact their customer support team directly. Contact information can typically be found on the product packaging or the brand's official website.

OLIGHT Official Website: www.olightstore.com

© 2025 OLIGHT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.