SRJTEK 8-inch Touch Screen Digitizer Glass Panel Replacement

1. Introduction

This manual provides essential information for the proper installation and handling of your new SRJTEK 8-inch Touch Screen Digitizer Glass Panel for the Teclast P80 TLC005 ID:G3M2 Tablet PC. Please read all instructions carefully before proceeding with installation.

Important Disclaimer:

• This product does not include a detailed instruction manual. It is highly recommended to watch relevant installation videos on platforms like YouTube before attempting replacement.
• Installation requires a certain level of technical knowledge and skill. If you are not experienced, it is advisable to seek assistance from a professional technician.
• Our company is not responsible for any damage or malfunctions that occur due to incorrect installation procedures. Use this product at your own risk.
• Screen replacement parts are extremely fragile. Handle the product with extreme care when opening the package and during installation. Avoid applying pressure to the gaps of the screen, as this can cause damage to the panel.

2. Product Identification

The Teclast P80 tablet has various model versions. It is crucial to verify the specific Model ID of your tablet to ensure compatibility with this replacement part. This replacement part is specifically for Teclast P80 TLC005 ID:G3M2.

2.1 How to Check Your Tablet's Model ID

1. Locate the Model ID on the back of your Teclast P80 tablet.
2. If the ID number differs from "TLC005 ID:G3M2", you may need to remove the back case of your tablet to check the flex cable number for further verification.
3. If you are unsure about compatibility, please contact customer service for consultation before proceeding with the installation.

Figure 2.1: Back of Teclast P80 tablet showing the Model ID "TLC005 ID:G3M2". Ensure your tablet matches this identification.

Figure 2.2: Comparison of different Teclast P80 and P80h model IDs. Always verify your tablet's exact model ID before purchasing or installing a replacement screen.

3. Installation Guide

This section outlines the general steps for replacing the touch screen digitizer. Please remember that this is a delicate procedure and professional assistance is recommended if you are not confident.

3.1 Pre-Installation Steps

1. Power Off: Ensure your tablet is completely powered off before starting.
2. Backup Data: It is always recommended to back up any important data on your tablet before performing repairs.
3. Gather Tools: Prepare all necessary tools for tablet disassembly and screen replacement (e.g., small screwdrivers, prying tools, heat gun/hair dryer, adhesive).
4. Clean Surface: Work on a clean, static-free surface.
5. Inspect New Part: Carefully inspect the new touch screen digitizer for any visible damage before installation.

3.2 Replacement Procedure (General Steps)

The following steps are a general overview. Refer to specific video guides for your tablet model for detailed instructions.

1. Heat the Edges: Gently heat the edges of the tablet screen to soften the adhesive.
2. Carefully Pry Open: Use a thin prying tool to carefully separate the old screen from the tablet frame. Work slowly to avoid damaging internal components.
3. Disconnect Cables: Disconnect the flex cables connecting the old digitizer to the tablet's motherboard. Be extremely gentle with these connectors.
4. Remove Old Screen: Once all connections are severed and adhesive is loose, remove the damaged screen.
5. Clean Frame: Thoroughly clean any remaining adhesive residue from the tablet frame.
6. Connect New Screen: Carefully connect the flex cables of the new digitizer to the motherboard.
7. Test Functionality: Before fully adhering the new screen, temporarily connect it and power on the tablet to test touch functionality. If the screen does not work, try restarting the tablet. If issues persist, recheck connections or contact support.
8. Apply Adhesive: Once tested and confirmed working, apply new adhesive around the tablet frame.
9. Secure New Screen: Carefully align and press the new touch screen digitizer onto the tablet frame, ensuring a secure fit.
10. Final Assembly: Reassemble any other parts of the tablet.

Figure 3.1: The SRJTEK 8-inch Touch Screen Digitizer Glass Panel replacement part.

Figure 3.2: Close-up view of the replacement digitizer, highlighting the flex cable connection point.

4. Important Considerations

• Internal Screen Damage: If the internal LCD display panel is faulty, replacing only the external touch screen digitizer will not resolve the issue. Ensure the root cause of the tablet's malfunction is identified before purchasing this part.
• Product Variations: Due to different production batches, the internal codes or markings on the screen may vary from the product images. This does not indicate incompatibility if the model number matches. We guarantee that the received replacement screen is compatible with your specified tablet model.
• Retain Original Parts: This package only includes the touch screen digitizer. Please retain all other original parts of your tablet for reassembly.
• Minor Imperfections: As an imported product, minor dirt or imperfections may be present. This is normal and does not affect functionality.

5. Specifications

6. Troubleshooting

• New Screen Not Working:
  • After connecting the new screen, if it does not respond, try restarting the tablet.
  • Ensure all flex cables are securely and correctly connected. Disconnect and reconnect them carefully.
  • Verify that the tablet's internal LCD display is functioning correctly. This replacement part only addresses touch screen issues.
• Damaged Item Received:
  • If the package or item is damaged upon arrival, please take a video of unboxing the item or clear photos of the damage. Contact customer service immediately with this evidence.

7. Warranty and Support

This product is provided without an explicit manufacturer's warranty card or detailed instructions. For any issues or inquiries, please contact the seller directly through the platform where the purchase was made.

We specialize in touch screen digitizers, LCD displays, and smart parts. If you require other products or have wholesale inquiries, please contact us for pricing and availability.