1. Product Overview
The Oraimo SmartClipper2 is a professional cordless hair clipper designed for efficient hair and beard cutting. It features a powerful motor, long-lasting battery, and an LED display for convenience.

Image 1.1: Oraimo SmartClipper2 Hair Clipper with included accessories (guide combs, charging cable, oil, cleaning brush).
2. Safety Information
Please read all safety instructions carefully before using the appliance.
- Avoid use on infants.
- Keep the clipper away from water sources. Do not use near bathtubs, showers, basins, or other vessels containing water.
- Exercise caution with cutting blades. Blades are sharp and can cause injury if not handled properly.
- Do not charge the clipper while it is in use.
- Do not leave the clipper unattended while charging.
- Ensure the appliance is fully dry before charging or use.
- Keep out of reach of children.
3. Components and Features
- Stainless Steel Blades: High-precision 440C sharp blades for effective cutting.
- Powerful Motor: Equipped with a strong electromagnetic motor (6600 RPM) for consistent performance.
- LED Display: Smart digital display indicates battery level and charging status.
- Taper Lever: Adjustable lever for precise cutting length adjustments between 0.8mm and 2.0mm.
- Guide Combs: Four guided combs (3mm, 6mm, 9mm, 12mm) for various hair lengths.
- Rechargeable Battery: 2000mAh Lithium Polymer battery providing up to 150 minutes of cordless working time.
- USB-C Charging: Convenient USB-C port for charging.

Image 3.1: Detail of the 440C sharp stainless steel blade.

Image 3.2: Illustration of the powerful 6600 RPM motor inside the clipper.

Image 3.3: The Smart LED Display showing the battery percentage.
4. Charging the Clipper
- Ensure the clipper is turned off before charging.
- Connect the provided USB-C charging cable to the clipper's charging port.
- Plug the other end of the USB-C cable into a compatible USB power adapter (not included) or a USB port.
- The LED display will show the charging status and battery level.
- Charge the clipper for approximately 3 hours for a full charge. A full charge provides up to 150 minutes of cordless working time.
- Do not leave the clipper charging unattended.

Image 4.1: Charging the Oraimo SmartClipper2 using the USB-C cable.
5. Operating Instructions
5.1 Attaching Guide Combs
- Select the desired guide comb (3mm, 6mm, 9mm, or 12mm) based on the hair length you wish to achieve.
- Align the comb with the clipper blade and push it firmly until it clicks into place.
- To remove, gently pull the comb away from the blade.
5.2 Adjusting the Taper Lever
The taper lever allows for fine adjustment of cutting length without changing guide combs, useful for fading and blending.
- Move the lever up or down to adjust the blade's closeness.
- The lever provides cutting lengths between 0.8mm and 2.0mm.

Image 5.1: The adjustable taper lever and guide combs (3mm, 6mm, 9mm, 12mm).
5.3 Using the Clipper
- Ensure the clipper is fully charged.
- Attach the desired guide comb or adjust the taper lever for the preferred cutting length.
- Press the power button to turn on the clipper. The LED display will illuminate.
- Begin cutting hair or beard, moving the clipper against the direction of hair growth for best results.
- For optimal performance, ensure hair is clean and dry before cutting.
- After use, press the power button to turn off the clipper.

Image 5.2: The Oraimo SmartClipper2 in use for hair cutting.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Oraimo SmartClipper2.
- Cleaning the Blades: After each use, turn off the clipper and remove any attached guide comb. Use the provided cleaning brush to brush away loose hairs from the blades.
- Oiling the Blades: Periodically, apply a small drop of the provided lubricant oil to the blades. Turn on the clipper for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and reduces friction.
- Cleaning the Body: Wipe the body of the clipper with a clean, dry cloth. Do not use abrasive cleaners or immerse the clipper in water.
- Storage: Store the clipper in a dry, cool place, away from direct sunlight and moisture.
7. Troubleshooting
- Clipper not turning on: Ensure the clipper is fully charged. Check the LED display for battery level.
- Reduced cutting performance: Clean the blades thoroughly to remove any trapped hair. Apply lubricant oil to the blades. Ensure the blades are not damaged.
- Battery draining quickly: Ensure the clipper is charged for the recommended 3 hours. Avoid using the clipper while charging.
- Unusual noise or vibration: Turn off the clipper immediately. Check for any obstructions in the blades or motor area. If the issue persists, contact customer support.
8. Specifications
| Parameter | Value |
|---|---|
| Model | OPC-CL30 |
| Dimensions | 195 x 54 x 42.5 mm (Product), 22.7 x 16.4 x 5.4 cm (Packaging) |
| Weight | 660 g |
| Material | ABS+PC, Stainless Steel (Blade) |
| Rated Voltage | 5V |
| Rated Power | 5W |
| Blade Material | Stainless Steel (440C) |
| Charging Time | Approximately 3 hours |
| Working Time | Up to 150 minutes (2.5 hours) |
| Battery Capacity | 2000mAh Lithium Polymer |
| Motor Speed | 6600 RPM |
| Special Features | Cordless, LED Display, Adjustable Taper Lever |
9. Warranty and Support
Oraimo provides a 365-day (1-year) warranty for the SmartClipper2. This warranty covers manufacturing defects and issues arising from normal use.
- For warranty claims or technical support, please contact Oraimo customer service.
- Keep your proof of purchase for warranty validation.
- Customer service is available 24/7 and aims to resolve issues within 24 hours.
For further assistance, please refer to the official Oraimo website or contact their support channels.